B5 Haake F6 Circulating Water Bath

Water bath from 25°C to 100°C for the laboratory The ring bain maries for columns, Erlenmeyer flasks (more) or beakers are suitable for continuous operation, even unattended, thanks to the standard control of the level and lack of water. LAUDA Hydro water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range of 25 to 100°C. - The opening diameter of the water bath can be changed in approximately 20 mm increments by means of a set of rings that make up the lid. - The H 11 V, H 19 V models have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow use even with chemically aggressive fluids. - Temperature adjustment by knob with graduated scale Simple control: temperature adjustment with graduated knob. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Histological water bath from 25°C to 80°C for the laboratory This water bath model is used in histol (more)ogical, chemical, clinical and bacteriological laboratories for stretching and drying tissue samples. The exact temperature control of the LAUDA Hydro H 2 P water bath ensures clear visibility of the sample and gentle drying even on the heated edge. The instrument operates in a temperature range from 25 to 80°C with a constant temperature of ± 0.5 K. The body of the bath is made of black anodized aluminum. The low height of the bowl allows comfortable and safe work. - Temperature adjustment by knob with temperature scale - Temperature display by means of a reference thermometer on the edge of the pool - Tank interior in black anodized aluminum If you want to know more about water baths in histopathology and new histotechnologies in general, we recommend the HistoTube YouTube channel. Accessories Lid, to cover the bath interior, made of black anodised aluminium, with ball handle.

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Accessories available Water level regulator. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Julabo MA F12 Refrigerated Circulator Water Bath These were removed from a university lab where it w (more)as surplus to requirements. The unit powers up and is in good working order (digital thermometer not included). It is in good cosmetic condition with minor marks.

Baths digital DK2000 Series. Temperature range RT+5 to 100ºC. Resolution 0.1 ° C Stability ± 0.5 ºC (more), uniformity ± 1ºC. Timer 0-999 min. Digital display of time, temperature, and alarms. Cuba stainless steel. Perforated lid for bottles of different diameters (diameter max. 120 mm). Models available: 1 row, 2 holes, 6.6 L; 2-row, 4 holes, 12.7 L and 2 rows, 6 holes, 18.7 L. It shows the price for the model 1 row, 2 holes, 6.6 L. For other models consult the drop-down.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. Included are; ITEM-24098 Bowens Esprit 500 Professional Photography Flash Head with Accessories [condition: Used]ITEM-29716 Unbranded Mechanical Stage Cross Specimen Table Lab [condition: Used]ITEM-17348 Raymond A Lamb Hotplate Lab [condition: Used]ITEM-29783 Labnet Spectrafuge 16M ITEM-21195 3 x Micro Centaur Centrifuges [condition: Used]ITEM-17226 Bieffe Padova Light Source [condition: Used]ITEM-21148 3 x Bio-Rad Power Pac [condition: Used]ITEM-21064 WPA CQ75 Chart Recorder [condition: Used]ITEM-29874 Labnet MultiGene II Thermal Cycler [condition: Used]ITEM-21080 Thermo Electron FastPrep FP120 Cell Disrupter Lab [condition: Used]ITEM-21206 Advance Electronics Voltage Stabilizer [condition: Used]ITEM-17340 Stuart Scientific Orbital Shaker SO1 [condition: Used]ITEM-21146 2 x Stuart Scientific Orbital Shaker SO1 [condition: Used]ITEM-23963 8 x Eagle UV Bank Note Checker Lights [condition: Used]ITEM-17090 Hanna Instruments HI 8417 pH Meter [condition: Used]ITEM-17344 Lot of Microscope Heads & Other Parts [condition: Used]ITEM-21065 Griffin Velocity of Light Apparatus [condition: Used]ITEM-23988 Sorvall SS-34 Rotor [condition: Used]ITEM-21061 Philip Harris Classroom Laboratory Joulemeter Lab [condition: Used]ITEM-29717 Nikon Phase Contrast Condenser [condition: Used]ITEM-29622 Job Lot Axon Instruments [condition: Used]ITEM-17178 Lathe Faceplate 40cm Diameter [condition: Used]ITEM-19090 BIO-RAD Screen Eraser - K Phosphorimager Lab [condition: Used]ITEM-21152 Heraeus #3335 Centrifuge Rotor [condition: Used]ITEM-17360 Grant GD100 Laboratory Water Bath Lab [condition: Used]ITEM-23989 Sorvall SS-34 Rotor [condition: Used]ITEM-17088 Kodak Darkroom Lamp [condition: Used]ITEM-21181 5 x Audio / Sound Dual Channel Passive Direct Injection Boxes [condition: Used]ITEM-17293 Lot of Monitor Brackets [condition: Used]

F1 Mass Standard - knob weights with adjustment chamber - set (1 g - 2 kg), wooden box Number of pie (more)ces in the set: 15 Weights 1 g i 2 g – solid masses without adjusting chamber

Wherever high readability and precision are important. Wherever good repeatability in harsh industri (more)al conditions matters. Waterproof steel platforms are the ideal solution for any type of industry. Use the potential Our platforms can work with one of four weighing terminals to choose from: PUE 7.1, PUE HX7, PUE HY10, PUE 5. They have four load cells, which means that no matter where you put the goods on the pan, the measurement result will always be the same. The power of steel The use of stainless steel for both the pan and the frame guarantees you a long life for the platform. It is not intimidated by contact with moist objects or accidental splashes. The entire construction made of stainless steel translates into a high degree of protection for these platforms: IP 68.

Labconco 120, 150 & 300 ml Fast-Freeze Flask TopFlexible,non-contaminating silicone rubber top f (more)its on Fast-Freeze 120, 150 and 300 mlbottoms.Fast-FreezeFlasks attach with adapters to valve ports on Labconco Drying Chambers andManifolds. A complete Fast-Freeze Flask consists a rubber top, glass bottom anda supply of filter paper. Tops, bottoms and filter paper are availableseparately as replacement components. Adapters are available in borosilicateglass or stainless steel. Fast-Freeze Flasks and Adapters are compatible withany brand freeze dryer that has 1/2" or 3/4" diameter valve ports.Glass flaskswithstand max temperature of 490º C. Flask toppers withstand a maxtemperature of 450º C. INCLUDED: The Labconco 7544200 120, 150 & 300 ml Fast-Freeze Flask Top includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Heidolph 036300380 Overhead Stirrer Impeller, TR 20 Radial Flow Due to the jagged shape of the stirr (more)er blade, the radial flow impeller TR 20 is ideally suited for the construction of emulsions and the gassing or foaming of liquids in vessels with the following characteristics: ideal vessel diameter: 80-140 mm, ideal ground clearance: 14-28 mm, ideal filling level: 80-140 mm, ideal volume: 400-2,200 ml. The radial-flow impeller TR 20 has a total length of 400 mm and is made of stainless steel. Its stirrer shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300380 Overhead Stirrer Impeller, TR 20 Radial Flow includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty