Lauda Alpha RA 8 ChillingThermostatic Water Bath Lab

Water bath from 25°C to 100°C for the laboratory The ring baths for columns, Erlenmeyer flasks or be (more)akers are suitable for continuous operation, even unattended, thanks to the standard level and lack of water monitoring. LAUDA Hydro ring water baths are available in five models, all featuring a removable perforated lid with a set of heat-resistant plastic rings. - Operations in a temperature range from 25 to 100°C. - Models H 11 V, H 19 V have been specially designed for safe use in fume cupboards. - The housings are made of stainless steel to allow their use even with chemically aggressive fluids. - Temperature regulation by knob with graduated scale - Lid with set of rings for opening the modular tank - Water level and lack control, for continuous unattended operations - The support rods (length 600 mm, diameter 12 mm), made of stainless steel, are included as standard - Hydro is protected against dry running by an electro-mechanical valve. In case of low water, the heating is stopped In the photo, simple control panel, with knob, graduated scale, warning light and safety valve. Ring opening, to adapt to different types of glassware. Standard water level regulator for continuous operation, even unattended. Safety system in case of water shortage LAUDA evaporization baths are protected against dry running by a cut-off device for lack of water (thermostatic overvoltage). The nut located on the control panel will be used to disarm the security system. Water level regulator as standard Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

C.B.S. Scientific Model 71 Water Bath DGGE-2001 DGGE Electrophoresis System Lab This was removed fro (more)m a university lab where it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order.  Both pump speeds (High/Low) work correctly. Included are; TankModel: DGGE-2001Volts (DC/Hz): 250VDCMaximum Operating Limits: 250VDC/30W/70ºC Polyscience Model 71 Analog Immersion Recirculating Water Bath Heater PumpModel: 71Voltage: 240RangeHz/A: 50/4.30S/N: G15327Rev: B

Julabo PURA 4 Water Bath, 115V/60Hz Working Temperature Range 18°C to 99°C Heating Capacity 500W Vo (more)lume 4.5L Features - Ease of use - Bright display - Splash-proof protected mains switch - Built-in dry running protection - No disturbing elements in the bath - Platform included as standard - Integrated timer - Non-slip rubber feet - Ergonomic recessed grips - Space-saving model for use with one test tube rack The Julabo PURA water baths stand for a straightforward and safe working in the laboratory. The high-quality water baths offer a temperature stability of ± 0.15°C (with bath cover). The working temperature range of +18°C to 99.9°C (with counter-cooling/bath cover) allows a wide range of applications, such as routine laboratory work, temperature applications for samples, incubation, material testing, corrosion testing, temperature control applications of cultures as well as temperature tests of food and beverages and in the dental field. All models (except PURA 4) come with an integrated drain screw for quick and clean draining of the baths. PURA water baths can be used flexibly and can be easily transported through ergonomic side recessed grips. Non-slip rubber feet ensure a firm footing and more safety in the laboratory. The units are splash-proof, feature a (membrane) keypad and temperature display (LED) for ease of use. Operation in °F or °C with integrated timer. There are no disturbing parts inside the bath so that the entire inner surface can be used to safely temperature-control even small sample containers. Click Here to View Product Video INCLUDED: The Julabo PURA 4 Water Bath, 115V/60Hz includes: - Platform - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Julabo SW23 Shaking Water Bath 115V/60Hz (NRTL Certified) Working Temperature Range 20°C to 99°C Sh (more)aking Speed Range 20 to 200 RPM Volume 20L Features - Microprocessor technology with PID temperature control - Bright Multi-Display (LED) - Seamless, splash-proof keypad - Splash-proof mains switch - Electronic timer for setting the running time (0:01 to 9:59 h:min) - On-line communication via built-in RS232 interface - Early warning system with high and low temperature limits - Drain screw for conveniently emptying the bath - Dry-running protection / safety temperature fixed at 105 °C - Wide range of accessories including lift-up Makrolon bath cover available - EasyTemp control software is available free of charge - Removable shaking carriage - Shaking frequency adjustable from 20 to 200 rpm - Shaking frequency indicated on Multi-Display (LED) - Shaking stroke 15 mm - With integrated circulation pump The JULABO SW shaking water baths provide for unsupervised sample incubation. Stainless steel construction with an operating range from +20°C to +99.9°C. User-friendly operation via keypad with bright LED display. Electronic timer from 1 min to 9h 59min. Integrated RS232 interface for integration to PC software for control and data logging. Early low water level warning system. Early warning system with high and low temperature limits ensures that samples maintain the proper temperature. A removable shaking carriage for easy sample removal. A wide range of accessories, including bath covers, are available. Shaking frequency adjustable from 20 to 200 rpm. Shaking stroke = 15 mm. SW22 unit with ± 0.2°C stability. SW23 incorporates a water circulation pump for a stability of ± 0.02°C. INCLUDED: The Julabo SW23 Shaking Water Bath 115V/60Hz (NRTL Certified) includes: - Removable Shaking Carriage - Integrated Circulation Pump - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato CF-303Y Cooling Water Circulator 3.9L, 115V Operating Ambient Temp. Range 5 to 35°C Max. Flo (more)w Rate 10L/min. Refrigerant R452A Features - User-friendly controller with high visibility and improved operability. Possible to switch between measured temperature and set temperature - Convenient circulation pathway connection is completed by inserting a hard tube with 10 mm OD or flexible hose with 9mm ID. Connector can be freely moved and be set in the desired direction - Easy drainage of condensate water via a drain port near the connector on the upper rear of the unit - Easy to clean intake filter located on the front of the unit can be removed when cleaning - Space-saving solvent recovery device stored in the main body as secondary trap (option for CF802A) A powerful 3.9L closed circulation system with excellent cooling capacity designed to work with laboratory equipment such as rotary evaporators. Easy maintenance of air intake filter. Rotatable connector which can freely be moved and be set in the desired orientation. Convenient drainage of waste water. Compact and space-saving to fit on laboratory tables and limited space. Temp. range: -20°C ~ 30°C. INCLUDED: The Yamato CF-303Y Cooling Water Circulator 3.9L, 115V includes: - Condensation drain hose - Hose clamp (2) - Hose nozzle (for flexible hose connection(2) - spare fuse for service outlet 2A (1) for CF802A - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Zeiss Axioplan 2 Fluorescence Microscope w/ 4 Objectives Lab This item was removed from a university (more) where it was surplus to requirement. The unit appears to be functioning well and can also be controlled via the free MicroManager software. It is in good cosmetic condition. It does feature the following: 2x Eyepieces PL 10 x 25P/N: 44 40 34 2x Zeiss Plan-NEOFLUAR 40x/0.75 ∞/0.17P/N: 44 03 51P/N 44 03 50 1x Zeiss FLUAR 100x/1.30 oil ∞/0.17P/N: 44 02 85 1x Zeiss Plan-NEOFLUAR 63x/1.25 oil ∞/0.17P/N: 44 04 60 1x Carl Zeiss HAL 100 12v 100w lamp houseP/N: 1039-685 1x Zeiss Reflector Turret with 6 filters1x FITC 1x TRITC1x YFP1x CFP1x Cy51x DAPI

Scilogex Glassware set: Vertical dry-ice condenser, 1000ml evaporating flask NS 24/40 and 1000ml rec (more)eiving flask KS 35/20 The Scilogex Glassware set: Vertical dry-ice condenser, 1000ml evaporating flask NS 24/40 and 1000ml receiving flask KS 35/20 includes a vertical dry-ice condenser, a 1000ml evaporating flask with an NS 24/40 joint, and a 1000ml receiving flask with a KS 35/20 joint. This set is designed for use in rotary evaporators, which are commonly used in chemistry and biology laboratories to remove solvents from liquid samples. The evaporating flask is used to hold the sample, while the receiving flask collects the condensed solvent. The vertical dry-ice condenser included in this set has a cooling surface area of 1700cm^2, which provides efficient cooling to the sample during the evaporation process. The use of dry ice as a cooling agent ensures that the temperature of the sample remains constant, which is crucial for obtaining accurate and reproducible results. The evaporating flask has an NS 24/40 joint, which is a standard size that is compatible with a wide range of rotary evaporators. The receiving flask has a KS 35/20 joint, which is also a standard size that is compatible with many rotary evaporators. INCLUDED: The Scilogex Glassware set: Vertical dry-ice condenser, 1000ml evaporating flask NS 24/40 and 1000ml receiving flask KS 35/20 includes: - 1000ml Evaporating Flask NS 24/40 - 1000ml Receiving Flask KS 35/20 - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Yamato LT-500BA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V Speed Range  (more) 25~1200rpm Max Torque 1.0N•m (10.0kgf•cm) Motor DC Brushless Motor 30W Features - Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir - Maintenance free DC brushless motor - Digital speed indicator for accurate speed setting and confirmation - Noise prevention measures for optimal work environment - More safety-oriented design Laboratory stirrer with well-blanced speed and torque for medium viscosity samples. Highly sensitive feedback system keeps the set speed, even with changing viscosity during stir. Maintenance free DC brushless motor. Digital speed indicator for accurate speed setting and confirmation. Noise prevention measures for optimal work environment. More safety-oriented design. Set includes stand, rod, stainless steel shaft and 60mm 4-blade propeller. Speed range 25~1200 rpm. INCLUDED: The Yamato LT-500BA Complete Overhead Stirrer with Stand & 60mm 4-Blade Propeller, 115V includes: - Stand and Rod - Clamp, Safety Cover, Chuck Handle - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW