Memmert IPP30 Peltier-Cooled Forced Circulation Incubator 32L, 115V

Thermo Scientific HERACELL 150i GP Co2 incubator / oven In excellent condition, only used 6 months.  (more)Thermo reference: 51032719 Years of manufacture: 2021 Forced convection Volume: 151 liters Stainless steel chamber iCAN touch screen Patented humidification system without water tray for rapid return to set points Temperature regulation range. : TA+3 at 55°C Constant humidity: 95% ± 3 Hr CO2 regulation range: 0 to 20% Heat emission at 37°C: 0.06 kWh/h CE certification 230 V, 50/60 Hz Ext. sun. (L x H x D) mm: 637 x 867 x 782 Sun Int. (L x H x D) mm: 470 x 607 x 530 Weight: 70 kg Supplied complete with: 1 CO2 thermal conductivity (CT) sensor 1 water level sensor 3 stainless steel shelves 423 x 465 mm 1 42 mm cable passage 1 interior glass door with closure Tested at 37°C CO2 at 5% Year of manufacture: 2021

LABORATORY INCUBATORS CLW SMART POL-EKO CLW - FORCED AIR CONVECTION CLW Series incubators maintain a (more) constant temperature from 5°C above room temperature to a maximum of 100°C. The CLW models are available from 15 to 1005 liters with latest generation control, quality materials and first-in-class performances. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLW SMART SERIES The nine models of the CLW series cover most of your needs: from mini stoves to the 1005 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

Temperature range: Ambient +5°C to 100°C Temperature uniformity at 37°C: ±0.3 K Temperature uniformi (more)ty at 100°C: ±1.0 K Temperature fluctuation at 37°C: ±0.1 K Temperature fluctuation at 100°C: ±0.3 K Heating up time to 37°C: 55 min Heating up time to 100°C: 90 min Recovery time after door was opened for 30 s at 37°C: 15 min Load per rack: 30 kg Permitted load: 150 kg Capacity: 112 L Internal dimensions (WxHxD): 510 x 530 x 420 mm Dimensions (WxHxD): 710 x 705 x 605 mm Weight: 54 kg

Temperature range: Ambient +5°C to 100°C Temperature fluctuation (at 37°C): ± 0.1 K Temperature fluc (more)tuation (at 50°C): ± 0.1 K Temperature uniformity (at 37°C): ± 0.5 K Temperature uniformity (at 50°C): ± 0.9 K Warming up time (to 37°C): 70 min Warming up time (to 50°C): 115 min Recovery time after door was opened for 30 sec (at 37°C): 5 min Recovery time after door was opened for 30 sec (at 50°C): 6 min Maximum load: 70 kg Maximum load per shelf: 30 kg Capacity: 240 L Dimensions (WxHxD): 1035 x 825 x 745 mm Interior dimensions (WxHxD): 800 x 600 x 500 mm Weight: 93 kg

Temperature range: Ambient + 5°C to 50°C Digital Temperature Control Dimensions (WxDxH): 765 x 800 x (more) 2150 mm Internal dimensions (WxDxH): 530 x 630 x 1450 mm

*Remove tape and various marks - other than those it is in very good cosmetic condition* Panasonic M (more)DF-U443-PE Biomedical Freezer Lab This item was removed from a university where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in good cosmetic condition. Features: 3 x Shelves: 53 x 61 cm

Thermo Dionex ASRS 300 2 mm Self-Regenerating Suppressor Dionex reference: 064555 Year of manufactur (more)e: 2012 Never used

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Benchmark IPD9600-50S 50ml grinding jar, stainless steel, pack of 2 The Benchmark IPD9600-50S 50ml g (more)rinding jar, stainless steel, pack of 2 are ideal for grinding hard samples such as minerals, ores, polymers and circuit boards. These jars are offered in a 50ml volume. These jars are designed for use with the Benchmark IPD9600 BeadBlaster 96 Ball Mill Homogenizer. INCLUDED: The Benchmark IPD9600-50S 50ml grinding jar, stainless steel, pack of 2 includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty