General process equipment

Armfield PCT Process Control Teaching System Lab This system was removed from a university where it  (more)was surplus to requirement. All units are in good cosmetic condition and power on independently, it has not been tested as a full system. The lab confirmed it was in full working order prior to removal. Included are; -Armfield PCT-9 Process System (Powers on)Fair cosmetic condition -Armfield Pressure Control AccessoryFair cosmetic condition -Armfield PCT 13 Temperature control module (not powering on)Poor cosmetic condition -Armfield Process Controller (Powers on)Fair cosmetic condition

Buchi Mini Spray Dryer B-290 This item was removed from a university where it was surplus to require (more)ment. It is in good cosmetic condition and powers on. The display isn't clear, but it looks to be showing "error 04". The display then stopped showing any numbers or any sign of power. the ON/OFF switch still showed power. All buttons did not appear to be responsive. The Peristaltic pump did not move or appear to show any sign of power. The pump at the back of the unit did not show signs of power or make a noise either. Trolley included. It is sold for spares/repairs.

Lancer 820 LX Undercounter Laboratory Washer and Dryer This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks. Internal dimensions - D51 W52 H52cm

Buehler Abrasimet 2 Abrasive Cutter 95.C/800.400 This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and has been connected to the pump. It is in good working order. It is in reasonable cosmetic condition with the expected kinds of marks from use for a piece of equipment like this. Model Type - 95.C/800.400SN - 495.MSC.1956 Metaserv Spindle Speed 3600 rpmDisc size - 250 x 1.5 x 32mm Disc Size: 250mm Arbor Size: 32mmWheel RPM: 2830 RPM Vice cutting capacity: 80mm - 75mm diameter Safety features: Emergency stop, safety switch, electronic break Coolant connection size: 12.5mm Drain size: 32MM ID 34MM OD Coolant tank size: 23 Litre Power: 3 PHASE - No neutral Dimensions: : 800 x 550 x 450 mm  Tank Container dimensions - L50 W36 H29cmThe lid with the pump doesn't fit the tank.

HPC Laser Model: RC2412 Laserscript Table Router Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition and working order. This item is currently stored in the client's workshop in Salford, UK and is available for collection. We can also look into delivery options for an additional fee. This item also includes: 1 x Control Panel.1 x MPC6620 controller.1 x MPC6620 User Manual. (V1.0) July 2013. Item Dimensions: L 300 cm x W 170 cm x H 137 cm. Weight: 356 kg

Clearbridge BioMedics ClearCell FX Cell Retrieval System This was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up but is showing various historic faults from when it had been run previously. The client informed us it had a fault but were unable to confirm exactly what. It is in good cosmetic condition with minor marks. There are 2 x 50ml tubes fitted, a CTChip FR1S & bottle holder included.

Buchiglasuster 80L Mixing Vessel (Non-Jacketed Glass Vessel) 810013201 This was removed from a unive (more)rsity lab where it was surplus to requirements. We are told it was purchased in 2019 and was barely used. Project#: 810013201Article#: 99.31532.0000Total Capacity: 80LYear: 2019 The item appears to be in good cosmetic condition with no missing elements. The mixer head is included. It powers up and works well.

Gerber DSC 1500 Single Ply Automated Fabric Cutter This item was removed from a university where it  (more)was surplus to requirement. It is in good cosmetic condition, the previous client has stated it was in working order when last used. We were unable to test it at our facility as it has been decomissioned. Features:- Table size: 240 x 158 x 85cm ( l x w x h) - Cutting area: 183 x 152cm - Cutting speed: 1.1 meters per second Also includes the following: - Gerber carriage controller unit         Serial No. 2187        Year 2008 - HP Elitedesk 800 GI TWR PC running Windows 7 installed with Gerber Cutworks 5.1 software - HP KB-1156 keyboard - Iiyana Prolite Monitor - HP mouse part No. 672651-001 - Kramer data splitter box - Instruction Manual - Mechanical and Engineering Manual - 7 x Data cables *A compressed air system of 90 - 120psi at 14L/m is required for operation.*

GE Healthcare / Cytiva Xuri Cell Expansion System W25 This system was removed from a university wher (more)e it was surplus to requirement. All units are in good cosmetic condition and powered up, we are unable to test the system further at our facility due to not having the required software. HP Elite desktop PC - No operating system or software included. We have left the PC with the system in case it has relevant hardware installed. This system comprises the following: Cytiva XuriTM Cell Expansion System W25 base unitCytiva Xuri Cell Expansion W25 PumpCytiva Xuri Cell Expansion W25 CBCU HP EliteDesk PC w/ Dell Monitor & HP Mouse and Keyboard. TH Cytiva Filter Heater

Battenfield Microsystem 50 Injection Moulding Machine This was removed from a university workshop wh (more)ere it was surplus to requirements. The unit was not tested on our site, but the lab confirmed it was in working order prior to removal. It is in good cosmetic condition with minor marks.

Stylcam 200R High Speed Rotary Press Simulator System w/ PC & Software Lab This system was remov (more)ed from a university where it was surplus to requirement. It is in good cosmetic condition with all units powered on, we are unable to test it further at our facility. This system includes a PC set-up with the following software installed: - Analis 2.01.16 Version This system cannot be exported and the eventual buyer will be subject to a disclaimer.

GE Healthcare AKTA Avant 150 Chromatography System This was removed from a working lab where it was  (more)surplus to requirements. The unit has been recertified by a service engineer. They were unable to run a full service due to the absence of a control PC, but they gave it clean bill of health and preventative maintenance procedures were carried out. A full report is available on request. GE Healthcare AKTA™️ Avant 150 Chromatography SystemModel: AKTA Avant 150Code#: 28969436Serial#: 2066473Year: 2016/02

Amersham Biosciences AKTA Pilot Liquid Chromatography System This was removed from a laboratory whe (more)re it was surplus to requirements. The unit powers up and has been professionally serviced. It is in good working order. A report is available on request. It is in excellent cosmetic condition with minor marks.

Stomacher Seward 400 laboratory blender. Sample Volume: 80-400mls. Time Settings: 30, 60, 120 & Cont (more)inuous. Paddle Speeds: 200/230/260 ±5. For sample volumes from 80 to 400 ml, Stomacher laboratory homogenizers offer rapid mixing and homogenizations for a wide variety of laboratory samples. Stomacher machines work by the action of oscillating twin blades on the sample contained inside a sterile plastic bag.

Muffle furnace Selecta SELECT HORN. Chamber capacity 9 L. Adjustable temperature up to 1150 °C. Accu (more)racy ±1 °C. Resolution: 1 digit. Digital electronic temperature and time controller that allows programming a ramp of up to 8 segments or two of 4 segments. Heating elements evenly distributed. Fiber-ceramic insulation. Up-and-over door with disconnection of operation in opening. It has some flaws in the paint that do not prevent its operation. Dimensions: inside 15*20*30 cm, outside 58*59*65 cm; 70KG. 3000 W. User manual. The Selecta SELECT HORN muffle furnace is high-quality equipment designed to carry out calcination, heat treatment and other processes at high temperatures in a precise and controlled manner. With a heavy-duty heating chamber and a digital control system, this oven guarantees uniform heat distribution and a constant temperature throughout its interior. With a capacity of up to 1150°C, the Selecta SELECT HORN muffle furnace is ideal for research laboratories, chemical and metallurgical industries, as well as applications in the field of ceramics and jewelry. Its compact design and robust construction make it easy to use and maintain, ensuring reliable, long-lasting performance in every work cycle. In addition, the Selecta SELECT HORN muffle furnace has a safety system that protects both the equipment and the user, avoiding possible accidents during its operation. With an intuitive interface and programmable functions, this oven offers versatility and precision in each process, making it an indispensable tool for any laboratory or industry that requires high controlled temperatures.

Selecta Agimatic N hot plate stirrer of 10 L capacity. 60-1600 rpm. Temperature range: from 50ºC to  (more)350ºC. 14.5 cm diameter stainless steel plate. Analog speed and heat control from 0 to 100%. Indicators with light. Selecta Agimatic N hot plate stirrer is a compact and efficient device that can be easily placed on a laboratory table. With its 10 liter capacity, it is ideal for heating liquids in a uniform and controlled manner in research and experimental environments. 50Hz 220 V 3A 306 W

Electronic balance Sartorius SIWRDCP-1-3-I. Capacity max. weighing 3 kg, Readability of 0.1 g. Remot (more)e Control. Manual of instructions. Specifications:

RAYPA IRE-160 refrigerated incubator. Capacity 160 L. Temperature range 0º C to 45 ºC. Forced air ci (more)rculation. Stability ± 1.5ºC; homogeneity ± 1.5 ºC. Digital temperature and time control. Two internal sockets for equipment connection. RS232 connection. Closing. Includes three trays. Dimensions (H*W*D): inside 73*51*43 cm; exterior 94*60*60 cm. Weight 75kg. User manual. Raypa IRE-160 refrigerated oven applications: Water analysis, B.D.O. (Biological Oxygen Demand), enzymatic reactions and bacterial cultures at low temperature, botany, conservation of samples, aging, cosmetics, etc.

Radwag WLC 6/A2/C/2 Precision Balance. Weighing range from 5g to 6kg. Readability 0.1 g. Linearity ± (more) 0.2 g. Plate size 195x195 mm. Self-calibration. 2 × RS232, USB-A, USB-B connectivity. Backlit LCD screen. Optional legal metrology (M) Class II (+ € 40). Radwag WLC precision balances are dedicated to very fast and accurate weighing in the laboratory and industrial environment. They can work in places far from a power supply source since they are equipped with an internal accumulator (230V) and a standard RS 232 interface. It has a stainless steel pan and a backlit LCD screen that guarantees the best legibility of the weighing result. Communication interfaces: 2 × RS232, USB type A, USB type B allow cooperation with external devices such as a printer, a computer, a pen drive, an additional screen. The scales also have a real time clock and an ALIBI weighing memory.

Radwag SAL / STONE / H polished granite anti-vibration table. Stainless steel construction. Maximum  (more)load capacity 150 kg. Dimensions 100 * 65 * 82 cm (width, depth, height). The Radwag SAL / STONE / H damping table is designed to ensure stable operating conditions for high precision measurements. The table is made of polished granite and is based on a stainless steel construction.

Platform scale with 1 sensor Radwag C315.30.F1.R. Capacity from 200g to 30kg. Readability [d] 10g. P (more)late size 300 x 300mm in AISI304 stainless steel. LCD terminal (with backlight) on platform. RS232 interface. Functions: Plus/Minus control, percent weighing, totalizing, parts counting, internal battery, peak hold, GLP procedures, animal weighing, ALIBI memory. A dual range scale can be made for an additional fee. The C315 single sensor balance is designed for accurate mass determination in light industrial conditions. It is equipped with a PUE C315 gauge with a backlit LCD display. The balance frame is made of powder coated steel with a stainless steel pan. The balance has two power sources: mains and battery.

Rack PVC 4 modes. For tubes Eppendorf and Falcon. -24 tubes of 20 mm diameter -24 x 15 mm -8 x 30 m (more)m -40 x 10 mm You can acquire 5 units

OMNI GLH-220 homogenizer. Motor 700 watts with variable  speed control from 5,000 to 28,000 rpm. It  (more)has a processing range of 0.20 mL to 10 liters. Includes base stand. Generator probes are not included but can be ordered independently. Compatible with 5, 7, 10, 20, 32 and 35 mm diameter stainless steel generator probes (see pictures on the left to find the model that best suits your needs). The OMNI GLH-220 Homogenizer is a high-power device with a 700-watt motor and variable speed control from 5,000 to 28,000 rpm. which allows obtaining precise and efficient results in the homogenization of samples This homogenizer offers a wide processing range, from 0.20 ml to 10 liters, making it suitable for a variety of applications. In addition, it has a compact and ergonomic design that makes it easy to use and manipulate. Whether for sample preparation in research laboratories or industrial applications, the OMNI GLH-220 homogenizer is a reliable and versatile choice.

MIL'S PS 12V vacuum pump. Single stage oil-free piston pump suitable for many types of applications  (more)in dry and wet environments. Compact design, with minimal maintenance and low acoustic level. Low energy consumption. They are recommended for applications where noise level is a priority. It has a pumping speed of 10 m3/hr and can reach a final vacuum of 80 mbar.

Memmert U30 drying and sterilisation oven. Capacity 45 L. Ambient temperature range +10 ºC to 220 ºC (more). Analogue temperature display (°C). Two power levels. Natural air circulation. Internal ventilation on 6 levels. Timer up to 120 min. Aluminium interior. Includes a perforated tray. Safety temperature limiter. Dimensions: internal 37*33*37 cm; external 52*55*68 cm. User manual not available. Introducing the Memmert U30 drying and sterilisation oven at Galileo Equipos! Perfect for laboratories looking for efficiency and precision, this oven stands out for its 45-litre capacity and a temperature range of up to 220 ºC. Ideal for drying and sterilisation, it offers optimal results thanks to its robust design and natural air circulation. With an integrated timer and temperature limiter, it ensures maximum safety in your processes. Take advantage of this excellent option with an unbeatable quality/price ratio. Buy now at Galileo Equipos and equip your laboratory with the best!

Matest YGM15418 / A059-12 vibrotamizer.  Includes lid and eight Ø300mm x 80mm sieves with AISI-304 s (more)tainless steel frame and AISI-316 mesh in accordance with ISO 3310/1 standards of 0.100mm, 0.200mm, 0.300mm, 0.400mm, 0.500mm, 0.600mm and 0.710mm. Capacity for up to 10 8" sieves. Digital control for selection of work mode Triple vibrating action (vertical, lateral and rotational). Timer 0-999 minutes and adjustable vibration intensity. The control panel can be mounted on the wall. The Matest YGM15418 / A059-12 Vibrotamizer is a high-quality equipment designed for the classification of granular materials in the laboratory. With a robust and efficient design, this sieve machine guarantees precise and reliable results in each test performed. Equipped with a powerful motor and a controlled vibration system, it offers optimal performance in separating particles according to their size. Its resistant and durable structure makes it an indispensable tool for research and quality control in various industrial sectors.

Electroporator Lonza 4D-Nucleofactor System. Formed by two modules: unit Core (control unit) and un (more)it-X unit-transfection). Unit X performs 16-to 32-transfections per minute. Includes instruction manual and original packaging. 2014. Specifications: 240 V; 50-60 Hz The Core Unit - Controlling the 4D-Nucleofactor™ System The X unit – Supporting Nucleofection™ of various cell numbers in different formats

Labotect C200 CO2 incubator for in vitro fertilisation (IVF). Capacity 200 litres. Temperature range (more). 27ºC - 47ºC. Stability / uniformity ±0.1 °C /  0.3 °C. Door camera and heated. Range CO2 0 - 10%. Sensor CO2 inflarrojo double beam. Minimal contamination. Active sterile humidity. Glass door, internal subdivided in 6 sections. Shelves adjustable. Over-temperature alarm 32-47 °C. Includes outer container to supply humidity, sterile. Manual. Specifications 230V , 50/60 Hz Device with medical acceptance Interior made of polished stainless steel Intelligent system of temperature control for the inner drying of the chamber. CO2 Sensor -Sensor inflarrojo dual beam -Accurate measurement -Recovery time very short -Long-term stability Direct heating. -Distribution of the homogeneous temperature in the interior -Recovery time very short Diagnostic system -Acoustic alarm and optical -Monitoring of the door -Remote alarm

Laboratory turnkey Bioer GeneLab. Integral solution that enables the reduction of costs and commissi (more)oning times. Includes areas of separate work with the photo the paneling tight sandwich-type steel floor PVC a heat-sealed bag, seals type, scotland, lighting, furniture, pressurization positive/negative for contamination control, air filtration, germicidal light, locks between rooms, for transfer of samples, pre-installation of electrical systems, hvac, telephony and the internet. Different configurations to choose suitable for laboratories of molecular biology and cell culture, among others.

IKA M20 universal mill. Shear / impact operating principle. Speed max. 20000 rpm. Circumferential sp (more)eed max. 72 m / s. Usable volume max. 250 ml. Product strength max. 5 Mohs. Max. product grain size 7 mm. Connection time 7 min. Disconnection time 10 min. The compartment where it is ground can be cooled with water or dry ice. User manual. IKA M20 universal mill. Charge mill for grinding hard or brittle substances dry and with little losses. The double-walled grinding chamber can be cooled via two hose connectors. The grinding chamber can be removed for easy cleaning. M21 mixer included.