Industrial sterilizers

This listing is for a Biotest Hycon RCS Air Sample Plus Air Sampler.The unit is in full working cond (more)ition and is ready for immidate realese.The Biotest Hycon RCS Plus Air Sampler is a highly reliable microbial air sampling system designed to monitor the microbiological quality of ambient air. It is widely used across multiple industries such as pharmaceuticals, food and beverage, healthcare, and other sectors where air quality is critical. This device operates using the impaction principle, where airborne microorganisms are captured onto an agar strip via centrifugal force for subsequent analysis.Key Features:Impaction Sampling Method: Separates and captures airborne microorganisms onto an agar strip for precise microbiological analysis.Sampling Volumes:7 preset sampling volumes: 10, 20, 50, 100, 200, 500, and 1000 liters.3 user-defined volumes adjustable between 1 to 1999 liters, providing flexibility for various sampling requirements.Intrinsic Safety: Certified to ignition class “ib,” which ensures safe operation in explosion hazard or hazardous areas.GMP and FDA Compliance: The device meets industry-standard Good Manufacturing Practice (GMP) and FDA guidelines for use in regulated environments.Adaptability: Customizable settings to fit user-specific needs and different air sampling conditions.Ergonomic Design: The lightweight and portable design allows for ease of use in routine air quality monitoring tasks.

Multi-risk cabinet 120 liters sliding door A1T TRIONYX Safety cabinet for chemical products With 4 r (more)etention tanks With a key Type: Drawer door Number of doors: 1 Width (cm): 56 cm Depth (cm): 50 cm Height (cm): 182.5 cm Maximum load (kg): 120 kg Material: STEEL Color: WHITE RAL: 9010 With some traces of rust

Plastic retention tank 70 liters on feet with grating 81x64x34 cm Plastic retention tank Capacity: 7 (more)0 liters Dimensions: 810 x 640 x 340 mm On 4 feet, with plastic grating, for storing chemicals in cans or drums Permissible load: 100 kg uniform distribution In polyethylene, color: YELLOW

304 Stainless steel 1.5″ Tc-clamp connection on both sides. Easy to disassemble for careful cleaning (more). Max. pressure 120 PSI (8 bar) Flow opening 51 mm Length 190 mm

The G 7883 washer-disinfector is suitable for reusing laboratory glassware for analytical experiment (more)s in, for example, industrial, environmental and research laboratories. This appliance has a large two-tier wash area and can be built-in under a continuous worktop or used free-standing. After an intensive main cleaning phase, disinfection takes place at >90°C and a storage time of 5 minutes. The final rinse is performed with deionized water without rinsing agents. Control/programs: Multitronic Novo Plus control (certain process parameters can be changed), with 10 standard cleaning programs Program operation/display: Operation via one-button program selector, display of program cycles, display of temperature and program duration, display of program end, optical and acoustic signal, indicator lights for service and fault messages Cleaning mechanisms: Rotating: two spray arms on top and bottom of the chamber, third spray arm on top basket. Dosing devices: Valve dispensers for powdered detergent and liquid detergents. Circulation pump: 400 l/min Temperature: Freely adjustable up to 93°C Drain: 1 drain hose Drying capacity: Gravity convection drying system, 10 minutes. Can be turned on or off in any cycle Water connection: 1x hot water, 1x cold water, 1x purified water Dimensions (WxDxH): 600 x 600 x 850 mm Weight: 74 kg

MORE DETAILS TO FOLLOW

This Tennant 1200 Self-Contained Carpet Cleaner was removed from a university where it was surplus t (more)o requirements. The unit powers up and all the buttons and triggers appear to be working. It was not tested further. It is in reasonably good cosmetic condition with some scuffs and marks from use.

Alloy Products Corp 316L MAWP 7.9 Bar Stainless Steel Vessel 115 PSI This was removed from a lab whe (more)re it was surplus to requirements. It has not been tested but is in excellent condition and looks like it may not have been used, but we are unable to confirm this.

Calder Pegasus  EF Control Unit V2.291 Fusion Welder This was removed from a university lab wh (more)ere it was surplus to requirements. The unit powers up and has actually never been used, but due to the fact it has been powered up over a year ago, it is now out of service, and will need to be serviced before it can be used again. For this reason it is sold for spares/repairs

Riello Model S3T 20 XTD T5 Lab This item was removed from a university where it was surplus to requi (more)rement. It is in reasonably good cosmetic condition, but we are unable to power it on as it was originally hard wired and as a result, it does not include a plug. Therefore, it is listed as Spares/Repair and would require a plug attached to attempt to power it on.

This Interlas Syncrotig 375 AC/DC Gas Tungsten-Arc/Shielded Metal Arc TIG Welder was removed from a  (more)university engineering lab where it was surplus to requirements. We haven't tested it at our facility further than powering it up but the lab said it was fully working prior to removal. It is a complete system. Actual unit dimensions - D58 W80 H143.5cm (comes on a trolley for mobility)27 x 58cm Platform to hold gas bottles. it is in reasonably good cosmetic condition with marks from use.

Miele Professional G7883 Laboratory Glassware Washer This was removed from a university lab where it (more) was surplus to requirements. It has been pressure tested at our site, and the lab confirmed it was fully working prior to removal. It powers up and is in reasonably good cosmetic condition with marks from use.

Steelco LAB 500 SCDL Laboratory Washer This was removed from a university lab where it was surplus t (more)o requirements. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks from use.

Miele Professional G 7883 CD Glassware Washer Lab This item was removed from a university where it w (more)as surplus to requirement. It is in good cosmetic condition and good working order. Includes: - 3 x Cleaning Racks (50 x 50 cm) One side of the program knob is broken, this does not affect the operation of the unit.

Miele Dishwasher G7883 / Aqua Purifier G 7895 / Dosing unit DOS G60 Lab These items were removed fro (more)m a university lab, where they were surplus to requirement. All units are in good cosmetic condition and working order. Included are the following: - Miele Dishwasher Model: G 7883      L69cm x W60cm x H85cm - Aqua Purifier Model: G 7895      L60cm x W30cm x H87cm - Dosing Unit Model: DOS G60

Lancer 820 LX Undercounter Laboratory Washer and Dryer This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition with minor marks. Internal dimensions - D51 W52 H52cm

Muffle furnace Selecta SELECT HORN. Chamber capacity 9 L. Adjustable temperature up to 1150 °C. Accu (more)racy ±1 °C. Resolution: 1 digit. Digital electronic temperature and time controller that allows programming a ramp of up to 8 segments or two of 4 segments. Heating elements evenly distributed. Fiber-ceramic insulation. Up-and-over door with disconnection of operation in opening. It has some flaws in the paint that do not prevent its operation. Dimensions: inside 15*20*30 cm, outside 58*59*65 cm; 70KG. 3000 W. User manual. The Selecta SELECT HORN muffle furnace is high-quality equipment designed to carry out calcination, heat treatment and other processes at high temperatures in a precise and controlled manner. With a heavy-duty heating chamber and a digital control system, this oven guarantees uniform heat distribution and a constant temperature throughout its interior. With a capacity of up to 1150°C, the Selecta SELECT HORN muffle furnace is ideal for research laboratories, chemical and metallurgical industries, as well as applications in the field of ceramics and jewelry. Its compact design and robust construction make it easy to use and maintain, ensuring reliable, long-lasting performance in every work cycle. In addition, the Selecta SELECT HORN muffle furnace has a safety system that protects both the equipment and the user, avoiding possible accidents during its operation. With an intuitive interface and programmable functions, this oven offers versatility and precision in each process, making it an indispensable tool for any laboratory or industry that requires high controlled temperatures.

Euromex bScope binocular digital microscope with built-in 5 MP camera, HWF 10x / 20 mm eyepieces and (more) quintuple turret with IOS objectives with infinite oil correction plan PLi 4/10 / S40 / S100x, stage 131 x 152/197 mm with XY stage integrated mechanical 75 x 36 mm without rack. 3W NeoLED ™ Köhler lighting and integrated power supply. Optional phase contrast. BScope microscopes are designed for intensive research use in high schools, universities, small laboratories, and veterinary applications. Euromex bScope DIGITAL BS.1157-PLi_B binocular digital microscope • Binocular model • Head with two observation heights • Integrated color CMOS camera 5,1Mp USB.2 • 2592 x 1944 pixels • 7 frames per second (2592 x 1944 pixels) • 27 frames per second (1280 x 960 pixels) • ImageFocus Alpha software CAMERA BScope digital microscopes are equipped with a 5.1 MP 1 / 2.5-inch USB-2.0 CMOS camera, 24-bit color depth, 7 frames per second (2592 x 1944 pixels) or 27 frames per second (1280 x 960 pixels). The dynamic range is 76 db and signal-to-noise ratio 41 db. Supplied with ImageFocus Alpha software, USB-2.0 cable, and 1mm / 100 part calibration pattern SOFTWARE ImageFocus Alpha capture and analysis software allows you to save images in .jpg, .tif, .bmp, or .dicom formats, as well as videos in .avi format. Measurements and annotations can be made on live or captured images. Compatible with Windows 7, 8 and 10, 32 and 64 bit configurations. Mac OS version available. Free updates can be downloaded