Lab Oven Smart SLN 240 POL-EKO

Chart MVE 500 Series MVE510AF-GB Liquid Nitrogen Tank Dewar This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up and we have the password available. We were unable to test it further. It is in good cosmetic condition with marks from use. Model no. MVE510AF-GBRef - 11905075SN - CAB2111410005 Internal dimensions - D91 x W52.5cm6 x Triangular storage holders sized 22 x 23 x 64cm (Blue spacers inside drawers)

4 x Melles Griot Optical Table Passive Isolator Legs This was removed from a university lab where i (more)t was surplus to requirements. The units are in good cosmetic condition but have not been tested. Product#: 07 OTi055Serial#: 700247Load Capacity: 1100kgAir supply pressure: 80PSi

These were removed from a university lab where they were surplus to requirements. There are 6 units  (more)in total 50cm X 50cm X 21cm

COMBISTORAGE 4 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Completely made of electroga (more)lvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Made in two or three compartments with smooth painted or glass doors - Cabinet body in galvanized steel Characteristics of the ACID COMPARTMENT: - Completely made of electrogalvanized steel sheet with a thickness of 1 - 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet designed for ventilation - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Certified fire resistant 90 minutes - Cabinets certified according to standards: EN14470-1, EN61010 and EN16121 Features of the BASE COMPARTMENT: - Two retention shelves made of stainless steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Characteristics of the COMPARTMENT FOR "TOXIC SUBSTANCES": - Two retention shelves made of painted steel, whose height can be adjusted - Opening doors at an angle greater than 110° - Lock and key - Complies with EN 61010-1 and CEI 66-5 standards - Storage capacity: 40 x 1L bottles (20L per shelf) Supplied: - Acids: 2 shelves in plasticized steel - Bases: 2 shelves in stainless steel - Toxic substances: 2 shelves in painted steel - Flammable: 3 shelves and 1 retention tank with painted steel grid (max load of 60 Kg evenly distributed) Optional: - Shelves - Trays - Timer - Visual and acoustic alarm system - Ventilation - Molecular aspirator - Activated carbon filter

CABINET CS 120 BASIC - CHEMISAFE - Made entirely of electro-galvanized steel sheet (Skin passat) FE  (more)P01, thickness 10/10 mm, cold pressed and painted, after degreasing treatment, with a first application of epoxy primer and with 2 subsequent applications of thermosetting powders and subsequent passage in a thermal tunnel at 200°C - “Monolithic” type constructions with feet at the base for leveling the cabinets - Double-paneled and reversible doors made of the same materials, complete with handles with safety locks and locks - Activated charcoal filter (optional) mounted on top, suitable for acid substances, with prefilter. Easy replacement of the filter behind a hinged panel with key lock - Handles with lock and key - Tray-shaped steel shelves with a thickness of 10/10 mm for the eventual containment of liquids in case of breakage or spread from the containers. Height adjustable - 110° opening that allows the shelves to be extracted without having to tilt them - Multilingual safety signs indicate the presence of dangerous and toxic products to highlight the contents and storage limits - Standardized pictograms according to ISO 3864 standards - Closure with safety lock and key - Compliant with EN61010-1 standards; EN16121 and CEI 66-5 Supplied: - 3 plasticized shelves (max load 80 Kg evenly distributed) Optional: - Shelves - Timer - Plinth - Retention tank - Door open alarm - Ventilation - Filter

Powerful stirring for your lab reactions AREC 7 features state-of-the-art heating plate technology,  (more)designed by VELP, which guarantees temperature homogeneity, thermal efficiency and long-lasting heating performance. You can rely on the AREC 7 for demanding laboratory reactions, stirring volumes up to 15 liters (H2O), from 50 up to 1500 rpm, thanks to the powerful motor and magnetic coupling. The electronic control adapts the stirring speed to any variation in the viscosity of the medium. SAFETY AND EASE OF USE FOR LAB OPERATORS The AREC 7 stirrer with heating plate guarantees a superior level of safety and protection for laboratory operators, as it is entirely made of technopolymer and is equipped with an extremely resistant ceramic plate, ideal for high resistance to acids, bases and solvents . When the plate temperature is above 50°C and the heating function is not active, a safety message is displayed. The control panel is positioned at a safe distance from heat sources and the technopolymer structure is carefully designed so that accidental spills of liquids cannot reach the electronics. The extremely durable ceramic plate is easy to clean and resistant to acids, bases and solvents. Using a damp cloth, all residues will be easily removed. SAVE TIME AND SPACE WITH THE NEW CONTROL PANEL Thanks to the extremely bright and easy-to-read digital display, the temperature can be monitored constantly. Two new comfortable knobs: the one on the left for the temperature (up to 550°C), the one on the right for the stirring speed (up to 1500 rpm). The innovative low profile design for exceptional comfort above the bench and inside the lab hood. It is not possible to connect AREC 7 to the Cloud Ermes system.

This Beckman Coulter Genomelab GeXP Genetics Analysis was removed from a university lab where it was (more) surplus to requirements. The item powers on, we are unable to test it further at our facility. The lab confirmed it was in working order prior to removal. Successfully performed self-calibration upon powering up. It is in good cosmetic condition internally and externally, with minor marks from use. The power lead and control cable are included.

IKA R 1331 Anchor Stirrer Tangential flow, high shearing rate at edges, minimum deposits on the ves (more)sel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer* for medium to highly viscous fluids.Stirrer Ø: 90 mmShaft Ø: 8 mmShaft length: 350 mm INCLUDED: The IKA R 1402 Dissolver includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

BrandTech Scientific Transferpette S-8 Multichannel M8-50, 5 to 50ul Pipette Volume Range 5 to 50 ul (more) Accuracy 0.8% / 0.40 ul at 50 ul Pipette Type Air Displacement Features - Ergonomic design ensures a comfortable grip for all hand sizes and both right- and left-handed users - True one-handed operation allows for easy volume setting, pipetting, and tip ejection without changing grip - Low operating forces and short stroke enable relaxed pipetting during extended use - Volume-change protection prevents accidental adjustments and is easy to operate even with gloves - Easy Calibration technology allows quick, tool-free calibration for consistent accuracy - 360° rotating pipetting unit for personalized comfort and flexible operation - O-ring system ensures easy mounting and ejection of tips, reducing strain during use - Individually removable nose cones and seals for easy cleaning and maintenance The BrandTech Scientific Transferpette S-8 Multichannel M8-50, 5 to 50 ul Pipette is engineered for precision and efficiency in high-throughput liquid handling applications. Designed for use with microplates and PCR plates, this 8-channel air displacement pipette covers a versatile volume range of 5 to 50 ul, making it ideal for various laboratory workflows. The ergonomic design ensures a comfortable grip for both right- and left-handed users, while low operating forces and a short stroke provide fatigue-free pipetting during extended sessions. True one-handed operation allows seamless volume adjustment, pipetting, and tip ejection without changing grip, streamlining workflow and improving efficiency. The integrated volume-change protection prevents accidental adjustments, ensuring accurate and reproducible results. Easy Calibration technology allows quick, tool-free recalibration to maintain consistent performance over time. The optimized design features individual O-rings for easy tip mounting and ejection, reducing strain on the user. Built for durability, the Transferpette S-8 is highly resistant to chemicals and UV exposure, making it a reliable solution for consistent, high-precision pipetting in any demanding lab environment.Click Here to View Product Video INCLUDED: The BrandTech Scientific Transferpette S-8 Multichannel M8-50, 5 to 50ul Pipette includes: - 2 x TipBox - Shelf Mount - Reagent Reservoir - Mounting Wrench - Silicone Grease - 1 Set of Shaft Seals - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

F2-class mass standards represent an impressive level of precision in mass measurement. Classified a (more)s metrology grade F2, they are recognized as top-quality tools suited for advanced applications where precision is a key element. F2 mass standard: flat polygonal sheet Nominal value: 1 mg Material: aluminum F2 Class Mass Standards – Key Features Exceptional Measurement Precision - F2 class mass standards feature excellent measurement precision achieved through stringent standards for allowable deviation from actual weight. Stability under Dynamic Conditions - An important feature of F2-class mass standards is their ability to maintain measurement stability even under dynamic measurement conditions. They are designed to cope with a variety of factors that affect measurement precision. Calibration at the Highest Level - The calibration process of F2-class mass standards adheres to the most stringent norms and standards. This makes the standards of this class recognized as tools with the highest degree of accuracy, complying with international requirements. Use of Materials with Outstanding Properties - F2 class mass standards are often constructed from materials with outstanding physical properties. This ensures not only excellent precision, but also exceptional durability. Application 1. Scientific Research at the Highest Level In scientific research, especially in fields that require the utmost precision, such as nuclear physics or astrophysics, F2 class mass standards are indispensable. 2. Metrology Industry In metrology laboratories engaged in testing and maintaining the most advanced measurement standards, F2 class standards are indispensable working tools. 3. High-Precision Testing Laboratories In laboratories specializing in research requiring the highest precision, such as forensic laboratories and materials testing, F2 class mass standards are essential. 4. Aerospace Industry In the precision mass measurements required in the aerospace industry, F2 class standards provide reliability and excellence. F2 class mass standards are the symbol of the highest precision in the field of mass measurement. Their use is crucial in the most advanced fields of science, industry and research.

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.