Industrial motors

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

Electric motor, transmissions LAFERT LM 71 C4 Type LM/71C4 (LM71C4) Motor 0,24Kw 230V 0,81 / 1300 (more) min-1

Smart Line Scan Camera Manuf: NANOcam / Germany; NOW ISRA SURFACE VISON / GERMANY Model: NANOcam 258 (more)8 with technical documentation and manuals, but WIHTOUT SOFTWAREwith CAN-Bus and RS-232 Interface and Power-Supply Cables ---------------see  PHOTOwith Lens Adaptor for MINOLTA Cameras------------------------------------------------see  PHOTO Description: Application of the NANOcam is in the field of surface inspection for industrial  processes the NANOcam is an intelligent smart line camera with internal PC . A complete  image processing system is integrated in the compact and robust camera housing. The normal processor 80486 was  upgraded by Manufacturer to 80586 processor Specifications: max. line scan rate..................................................3000 / secpixel elements..........................................................2588active array length.................................................. 25.88 mmdynamic range of CCD.......................................... 1 : 7000digital video............................................................... 256  ( 8 bit )power supply............................................................ 10 - 36  VDC / 18 Winterfaces....................................................................  RS-232 and fieldbus ( CAN/ Device Net ) the camera is in used, excellent cosmetic condition and was operating in German  GOV LAB and was there 100 % functional tested; the NANOcam will be delivered WITHOUT software.............application  software is available ( must be purchased ) at Manufacturer ISRA SURFACE VISION  / Germany

This Brook Hansen Motor with Gearbox  Type - 100 was removed from a university lab where it was (more) surplus to requirements. The item is in a reasonable, used cosmetic condition but has not been tested. It requires a 3-phase plug to be fitted. There is no on/off switch so we decided it wasn't safe to power up.

Felder AF 12 Extraction Unit Model: AF-12S/N: 401240/18/189 This was removed from a university works (more)hop where it was surplus to requirements. The unit powers up and is in good working order, the plug has since been removed. Includes dust collection bag.

This item has just arrived in our stock. Please enquire for further details.

Durr Technik 90L Oil Free Air Compressor This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order. It is in good cosmetic condition but the glass is missing from the gauge.

Job Lot of 21 Boxes of WintWire Welding Wire Size - 3.40 x 1.20 Mild Steel Job Lot of WintWire Weldi (more)ng Wire 21 x Boxes Box info:-CUST No. HPWAAMCast no. 89699Weight - 11.9kgS.O. - 16898/6Size - 1.204 x 3.411 FREQuality - Profile Mild Steel All looks new and unused though a box has been opened for photos.

Becker Motor Type: WB63A2STP & Danfoss 017A1681-01 These items were removed from a university w (more)here they were surplus to requirement. All elements are in good cosmetic condition. The Becker Motor Type: WB63A2STP. Powers up and is in good working order. The item is supplied with: Soundproof case.Becker pressure dial, 0 to 1000 mbar.Danfoss 017A1681-01.

ARMAGARD Industrial Computer Workstation This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition and powers up, we are unable to test further at our facility.

This Britweld Compact Single Phase Mig Welding Unit was removed from a university lab where it was s (more)urplus to requirements. We were unable to test it at our facility, but the university confirmed it was working when last used a few years ago. It is in reasonably good cosmetic condition with some marks from use.

Woods Air Movement Series 28 Fan Wind Testing Tunnel 710/289/1/4 This unit came from an engineering  (more)university. It was used to develop and test for the motor industry. We were assured it was in good working order.  The Flange/Working Section External Dimension 56cm X 56cm Included is a basic working section with two access panels. Approximate size of working section 56cm x 56cm X 100cm. The Fan type is a K. Blackman 28 series. The fan uses 7.5 kw Electric Motor with an inverter control. It is split into 4 sections; Unit 1- Main Fan/Control Unit- 130cmx130cmx175cm.-330 kgUnit 2- Joint Section- 68cmx62cmx86cm.- 24 kgUnit 3-Large Tunnel Section- 217 cmx77cmx149cm.- 150 kgUnit 4- Work Access Unit- 57cmx54cmx81cm.- 22 kg. Please enquire if you would like a delivery quote. The last time when the nozzle calibration was ran for that tunnel and it went up to a measured airspeed of 26m/s (94km/h).

Pair of Horizon Collators MC-8 MC-8a and MC-8m These were removed from a university lab where they w (more)ere surplus to requirements. Bot units are in reasonably good cosmetic condition and power on, but due to sustained damage, they are not fully operable and therefore, listed as Spares/Repair. The damage sustained is as follows: Part 1:The front intake has completely broken off, with the back tray significantly buckled. Part 2:The rear of the device has sustained severe damage or deformation as a result of mishandling or being dropped. The plugs have since been removed after testing the 32AMP.

Eurotherm Drives 620 Series VectorModel - 620STD/0007/400/0010/UK/ENW/0000/000/B1/000/000 This was r (more)emoved from a university lab where it was surplus to requirements. The unit has not been tested. It is in reasonable cosmetic condition but has marks from use.

Job Lot of WintWire Welding Wire 38 x Boxes Box info:-Order no. HPWAAM - S3Cast no. 017011Weight - 8 (more).4kgTensile - 945 N/mm2Size - 2.50 x 3.50 FREQuality - 1.4034 All looks new and unused though a box has been opened for photos.

2 TEC Transformers 1 x 3.5 kva 3 phase 440v to 200v, 1 x 1.84 kva 240v to 115v These items were remo (more)ved from a university where they were surplus to requirement. Both items are in good cosmetic condition. The smaller 1.84 kVA transformer was tested and found to be operational with a 115-volt power tool on both outlets.No testing was carried out on the larger transformer due to the higher voltage and internal hard-wiring required on the output. Further details regarding each Transformer: TEC 3.5kva three phase transformerSerial No. APR133Primary Volts 440 Secondary Volts 200Input plug red Walther type 210 16 ampsIsolation switchSupplies a very stable supply, designed for stepper motors, CNC machines, and servo equipmentSits on four castors for easy movementDimensions L x W x H 48 x 46 x 41cmsWeight 75kg TEC 1.84kva single phase transformerSerial No. APR135Primary Volts 240 Secondary Volts 115Input plug blue 16amp 3-pin plug 200-250 voltsDual output sockets Mennekes yellow 16amp 3-pin type 1362RS 100-130 voltsDimensions L x W x H 34 x 21 x 29cmsWeight 30.1kg

Mitsubishi Freqrol - A500 Inverter LabModel: FR-A520-3. 7K This item was removed from a university w (more)here it was surplus to requirement. It is in reasonably good cosmetic condition. We are unable to test this item as it requires a connection to a larger system.

Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine (Missing  Propeller) This was removed from a (more) university marine department. It was surplus to requirements. Included are; Evinrude E-Tec 40hp E40DPLIIS Outboard Boat Engine with GearboxModel: E40DPLIISSerial#: 05306542 The item appears to be in reasonably good condition.It is missing the propeller and is possibly missing additional elements but we are unable to confirm. The engine Cowl & Lower Engine Side Covers are Included but not assembled to the engine. Evinrude E-Tec 40 Engine CowlPart#: 353643 Item is in good used cosmetic condition. Evinrude E-Tec 40 Port Side Lower Engine Side Cover Left Part1#: 350 499Part2#: 350 809Part3#: 350 603 Evinrude E-Tec 40 Port Side Lower Engine Side Cover Right Part1#: 350 498Part2#: 350 652Part3#: 350 8608 Item is in good used cosmetic condition.

Murex Transtig AC/DC 355 Square Wave Welder This was removed from a university where it was surplus  (more)to requirements. We were unable to test the unit as it requires 3 Pin 660 Volts/60 Amps, which we do not have at our facility. It is sold as untested.

Orbit Marine Div AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it w (more)as surplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

Thomson Linear Micron DuraTRUE 90 Right Angle Gearhead Ratio:250:1 Y-Axis This was removed from a un (more)iversity lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested.

Thomson Linear Micron DuraTRUE 115 Gear Motor Ratio:250:1 X-Axis This was removed from a university  (more)lab where it was surplus to requirements. The unit is in good cosmetic condition with marks from use but has not been tested.

B.O.B Stevenson Type 7736 MN 40500 Centrifugal Fume Extraction Fan This item was removed from a univ (more)ersity where it was surplus to requirement. It is in good cosmetic condition, we are unable to test it further at our facility.

Integrated BMS Jet Nozzle Test Facility -CP3 Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition, we are unable to power it on or test it further at our facility. The unit has no power cable. Therefore, it is listed as Spares/Repair. Includes operation keys. Door key not included but can be opened with a standard control cabinet key.

Jun-Air Model 6/6-4 Quiet Running Compressor Lab This item was removed from a university where it w (more)as surplus to requirement. It is in good cosmetic condition and powers on. We are unable to test it further at our facility.

Limpsfield LPN3/2051 Natural Gas Burner 2051 KW/hr (7.0MBtu/hr) This item was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and in good working order. The item details are as follows: Model LPN3/2051Serial No. 1561Manufactured 24.02.17Output 2051 KW/hr 7.0 MBtu/hrDungs Control System With Autoflame Combustion Management SystemPart Nos. MM10005, MM10004 Serial Nos. 21267, 52981 WEG W22 7.5hp 415 volt fan motor

Seward Rondo Pastry Brake - Dough Sheeter This was removed from a commercial kitchen where it was s (more)urplus to requirements. The two pastry belts have heavy signs of wear and use This pastry brake has been tested and all functions are working although the pastry belts are heavily worn. Roller height lever to control thickness of pastry, between 0.5 cm and 25cm Aluminium flour tray 48cm x 12cm x 7cmWork height 90cmRetractable wooden extension shelf, 60cm x 40cmWorking width 90cm, length with shelf extended 275cm, height 115cmStorage compartment under belt area 88cm x 65cm x 65cm

This was removed from a university facility where it was surplus to requirements. The unit is in ful (more)l working order but has not been run since 2020. It is in good cosmetic condition with minor marks.