Hugo Sachs BEHA Power Supply for Submersible Pump 12V DC 3A

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Destainer power supply DPS

Leybold Heating Power Supply HU1 This item was removed from a university where it was surplus to req (more)uirement. It is in good cosmetic condition and powers up, we are unable to test it further at our facility.

Genapta Laser Enable and Disbale Units & Single Photon Counting Box This system was removed from (more) a university lab where it was surplus to requirements. All the units power on but we were unable to test any further. They are in a reasonable used cosmetic condition with marks from use.

Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply Transfer Area Up to 14 x 16 cm Maximu (more)m Power Settings 30 V, 500 mA, 15 W Maximum Gel Capacity 4 Mini Gels Features - Intelligent built-in power supply—prevents the stack from overheating by monitoring the transfer status - Requires minimal current—does not generate excessive heat that can dry out the transfer stack and halt transfer or damage transfer units - Durable iridium oxide and stainless steel electrodes—allow for contamination free, consistent transfer - Vented electrodes—prevent build up of bubbles which may impair transfer - Minimal buffer requirements—reagent cost and preparation time are reduced The Hoefer TE70XP Semi-Dry Transfer Unit with Built-In Power Supply is an innovative system designed for the rapid and efficient transfer of proteins from polyacrylamide gels onto nitrocellulose or PVDF membranes. Featuring an intelligent built-in power supply, the TE70XP monitors transfer status in real-time, automatically halting the process to prevent overheating of the stack. With a 14 x 16 cm transfer area, the TE70XP accommodates up to four mini gels in a stacked format, allowing for high-throughput transfers without compromising quality. This semi-dry transfer unit is equipped with durable iridium oxide and stainless steel electrodes, ensuring contamination-free, consistent results. Vented electrodes prevent bubble buildup, enhancing the reliability of each transfer. Designed to minimize buffer requirements, the TE70XP reduces reagent costs and preparation time, making it a cost-effective solution for busy labs. Its robust construction includes a molded base with a platinum-coated titanium anode and a hinged lid with a stainless steel cathode, ensuring long-lasting performance. INCLUDED: The Hoefer TE70XP Semi-Dry Transfer Units w/ Built-In Power Supply includes: - Molded Base with Platinum-Coated Titanium Anode and Internal Power Supply - Hinged Lid with Stainless Steel Cathode - Blotting Paper (14 x 16 cm), 25 sheets - Porous Cellophane (20 x 35.5 cm), 50 sheets - Mylar® Masks (16.5 x 18.5 cm), 2 pcs - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The certified intrinsically safe PM01.EX power supply, manufactured by RADWAG, has been designed to  (more)power the HX5.EX indicator. PM01.EX power supply comes in two designs: PM01.EX-1: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM01.EX-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. The certified intrinsically safe PM02.EX power supply, manufactured by RADWAG, has been designed to power the HRP.EX. PM02.EX power supply comes in two designs: PM02.EX-1-2: power supply intended for operation in hazardous area: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA. PM02.EX-2-2: power supply intended for operation outside hazardous area, equipped with intrinsically safe circuits that can be placed in: Zone 1 and 2, where there is a risk of explosion due to mixture of air with vapour, mist or gas, classified as explosion group IIC, IIB and IIA and as temperature class T1, T2, T3, T4. Zone 21 and 22, where there is a risk of explosion due to mixture of air with dust, flammable fibres and volatile fuels, classified as explosion group IIIC, IIIB and IIIA.

Manufacturer: Binder Model: KB 240 P/N: 9120-0030 S/N: 00-17471 Description: Binder KB 240 functiona (more)lity is based on APT.line™ preheating chamber technology. It has 240 L capacity achieving max. 100 °C. Features: - Convection Technology: APT.line™ preheating chamber technology- MP Controller with 2 Programms with 10 sections each / 1 Programm with 20 sections- Adjustable fan speed- Controller with time-segment and real-time programming- Inner door made of tempered safety glass Specifications: - Temperature range: 0°C to 100°C- Capacity: 240 L- Certifications/Compliance: Class 3.1 independent temperature safety device (DIN 12880) with visual and acoustic alarm- No. of Doors: 2- Dimensions (D x W x H) Interior: 500 x 800 x 600 mm- Dimensions (L x W x H) Exterior: 800 x 1034 x 1142 mm- Electrical Requirements: 200 to 240 V, 50 Hz. 4.1 A- Weight : appr. 170 kg Items delivered: - Binder KB 240 w/ 1x SS rack- Instruction Manual as PDF via E-Mail request Condition: The item is in very good cosmetic condition. It is 100% functional tesdted and ready to be operated.

Capacity: 96 tubes 0.2 ml, 96 well microplates Block: Silver Block coating: Gold Max Heating Rate: 6 (more).0°C/sec Max Cooling Rate: 4.0°C/sec Avg Heating Rate: 5.5°C/sec Avg Cooling Rate: 3.5°C/sec Temperature Uniformity at 95°C: ± 0.50°C after 15 s Temperature Uniformity at 70°C: ± 0.25 °C after 15 s Temperature Uniformity at 55°C: ± 0.15 °C after 15 s Gradient Temperature Range: 3°C to 99°C Temperature Range: 3°C to 99°C Control Accuracy: ± 0.1°C Lid Temperature Range: 30°C to 110°C Dimensions (WxDxH): 277 x 457 x 264 mm Weight: 15 kg

The Memmert BE 400 is ideally suited for all applications with temperatures up to 70°C in research,  (more)medicine, pharmacy and food analysis, as well as food chemistry. It is especially useful for incubating live cultures at 37°C. The incubator is equipped with manually regulated air flow. Temperature range: Ambient temperature +5°C to 70°C Capacity: 40 L Internal glass door for observation Convection: natural Dimensions (WxDxH): 555 x 515 x 675 mm Internal dimensions (WxDxH): 380 x 285 x 385 mm Weight: 54 kg

Equipped with dimmer and double fiberglass hose

Eppendorf 1 x 120ml Adapters, Cat. # 022637720 Eppendorf 1 x 120ml Adapters, Cat. # 022637720 for  (more)the A-4-44 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 1 x 120ml Adapters, Cat. # 022637720 are designed to be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 1 x 120ml Adapters, Cat. # 022637720 includes: - Full 6 Month Parts and Labor Warranty

Crest P1100D/HF-132 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced trans (more)ducer technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P1100D/HF-132 Digital Ultrasonic Cleaner w/ Power Control is a top-of-the-line table-top cleaning unit with digital control and display, operating at an ultrasonic frequency of approximately 132 kHz. It features a timer for ultrasonic operation adjustable from 1 to 99 minutes in steps of 1 minute or continuous operation. The integrated heater allows liquid temperature adjustment in steps of 1K up to 80°C. The ultrasonic power is adjustable in nine steps from approximately 40% to 100%, with a DEGAS function for consistent sample preparation. The ceramically enhanced transducer technology with industrial bonded assembly ensures a homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping. The cleaner includes a deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning and an intrinsically safe heater with dry-run protection. It also features a drain valve assembly for tanks with capacities of 2.5 gallons or higher. With a tank capacity of 3.25 gallons (12.3 liters) and dimensions of 11.75 x 9.5 x 8 inches (297 x 237 x 200 cm), the unit has an overall size of 12.75 x 10.5 x 13 inches (325 x 265 x 335 cm). It delivers an average ultrasonic power of 200 watts and a digital heater adjustable from 0 to 99 minutes, reaching up to 175°F (80°C). INCLUDED: The Crest P1100D/HF-132 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty