Memmert BE 400 Incubator

Gallenkamp Economy Incubator With Fan Size 1  INA.306.010J Lab This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and is in full working order. It is in good cosmetic condition and is very clean inside.

Lot Of 7 x Rotisserie Bottle/Tube Holders For Incubator All items are in good cosmetic condition wit (more)h minimal wear This job lot of items comes from a university lab, The items were no longer required. None of these items have been tested at our site - it is likely that some will be spares / repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle and further investment in each individual product may be required. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all.

PHCBI CO2 Incubator Model MCO-170AICD-PE With Shelving And Tray Lab This item was removed from a uni (more)versity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in very good cosmetic condition internally and externally. This item includes the following: 2 x Shelves: 47 x 45 cm

Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V Temperature Range 0°C (at  (more)least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 749L (26.5 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP750eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP750eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP750eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP30plus Peltier-Cooled Forced Circulation Incubator 32L, 115V Setting Temperature Range A (more)mbient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP30plus Peltier-Cooled Forced Circulation Incubator 32L, 115V provides precise and energy-efficient temperature control, ideal for laboratories needing reliable incubation solutions. With a 32-liter capacity and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, this incubator offers flexibility for a wide range of applications. The advanced Peltier heating and cooling system, combined with individually controlled upper and lower elements, ensures even temperature distribution. The intuitive ControlCOCKPIT with TwinDISPLAY and adaptive PID-microprocessor controller makes it easy to monitor and adjust settings, while the SetpointWAIT function ensures processes only start when the desired temperature is reached. Safety is paramount in the IPP30plus, with over- and undertemperature monitors and the integrated AutoSAFETY protection system providing visual and acoustic alarms in case of deviation. The incubator's stainless steel interior and textured exterior are built for durability, offering resistance to corrosion and easy cleaning. It also features three freely selectable temperature calibration points for precision control, and an autodiagnostic system for fault detection, ensuring long-term reliability in any laboratory setting. INCLUDED: The Memmert IPP30plus Peltier-Cooled Forced Circulation Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark SureTemp Dual Convection 130L Incubator The new SureTemp Incubator series provides the hig (more)hest level of temperature control with uniformity and stability levels that are unmatched by competitive models in the same class. Each incubator is equipped with the SureCheck data logging system for verification of chamber temperature. The SureCheck system records temperature data points as often as every 60 seconds and stores this information on a flash drive. The data can then be viewed and saved using the included the SureCheck software. The recorded data can also be used to plot temperature points on a graph or exported to a spread sheet program for verification or storage/record keeping. Unlike other laboratory incubators, the SureTemp series offers “Dual-Convection” technology, allowing users to choose between mechanical convection mode or gravity convection mode. Mechanical convection incorporates optimally positioned heating elements in conjunction with an internal chamber fan to control the internal temperature. Gravity Convection eliminates any airflow from the chamber, relying solely on the heating elements and gravity to control the internal temperature. The heating elements are strategically located on multiple sides of the chamber and contents can be viewed with the separate inner glass door without disrupting the temperature environment.INCLUDED: The Benchmark SureTemp Dual Convection 130L Incubator includes: - SureTemp Data Logging Software - Internal Power Outlet - 2 Stainless Steel Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty