Genapta Laser Enable and Disable Units & Single Photon Counting Box Lab

Wyatt Mini Dawn Treos WTREOS-08 Laser Photometer Model WTREOS-08 Untested equipment

Genapta Laser Enable and Disbale Units & Single Photon Counting Box This system was removed from (more) a university lab where it was surplus to requirements. All the units power on but we were unable to test any further. They are in a reasonable used cosmetic condition with marks from use.

This Rarecells Diagnostics Device was removed from a laboratory where it was surplus to requirements (more). The item powers on and is in a reasonable used cosmetic condition. We were unable to test it at our facility. It requires a 24v 5-pin power supply (not included).

Showa Optronics Co Laser System With Olympus FV10-COMB This system was removed from a university lab (more) where it was surplus to requirements. The system powers up but has not been tested further for safety reasons. Included are the following; Olympus FV10-COMB Showa Optronics Co GLS3135 LaserShowa Optronics Co GLS3135 PSU Showa Optronics Co GLG7000Melles Griot 05-LHP-991

Sorvall SS-34 centrifuge rotor. Capacity of 8 x 50mL. Max. speed 25,000rpm; max. RCF 50,228 x g. Ang (more)le 34°. Tube Diameter 29mm. Compatible with Sorvall RC-5, RC-5B, RC-5B Plus, RC-5C, RC-5C Plus, RC6c Plus, and RC-26 Plus centrifuges.

Memmert IF160 Forced Circulation Incubator 161L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 161 L (5.7 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 161 L (5.7 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF160 Forced Circulation Incubator 161L, 115V is designed to offer precise temperature control with a setting range from +20°C to +80°C and a working range starting at Min. 10°C above ambient. Its spacious 161 L (5.7 cu.ft.) stainless steel interior, reinforced with deep drawn ribbing, ensures durability and easy cleaning. Equipped with the advanced ControlCOCKPIT digital PID-microprocessor controller and a high-definition TFT-color display, this incubator allows users to adjust parameters such as temperature (in Celsius or Fahrenheit), fan speed, air flap position, and program time for optimized functionality. The IF160 also features forced air circulation through a quiet turbine, adjustable in 10% steps, and pre-heated fresh air admixture for enhanced performance. Safety is prioritized with an adjustable overtemperature monitor, mechanical temperature limiter TB, and autodiagnostic system for fault analysis. Additionally, it supports AtmoCONTROL software for efficient data management. With a maximum chamber load of 462 lbs across 8 shelves and a range of user-friendly features, this incubator provides precise and reliable incubation for various laboratory applications. INCLUDED: The Memmert IF160 Forced Circulation Incubator 161L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IN55plus Natural Convection Incubator 53L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 53 L (1.9 cu.ft.) Features - Internal volume of 53 L (1.9 cu.ft.) for versatile storage needs - Adjustable temperature range from +20°C to +80°C, with a working range at least 5°C above ambient - Precise control with 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring - ControlCOCKPIT with TwinDISPLAY, featuring an adaptive multifunctional digital PID-microprocessor controller with two high-definition TFT displays - Natural convection system for uniform temperature distribution, ensuring optimal results - Electronically adjustable air flap allows for admixture of pre-heated fresh air - Includes AtmoCONTROL software for managing and organizing data via Ethernet or USB interface - Safety features include adjustable electronic overtemperature monitor, AutoSAFETY system, and audible/visual alarms The Memmert IN55plus Natural Convection Incubator 53L, 115V offers precision and reliability for a wide range of laboratory needs. With an internal volume of 53 liters (1.9 cu.ft.), it provides ample space for your samples, all while maintaining a temperature range of +20°C to +80°C. The incubator is equipped with two Pt100 sensors in a 4-wire-circuit for mutual monitoring, ensuring highly accurate temperature control. Its advanced ControlCOCKPIT with TwinDISPLAY provides user-friendly operation, allowing you to adjust parameters like temperature, air flap position, and program time, all displayed on high-definition TFT screens. Designed with natural convection, this incubator ensures uniform temperature distribution without the need for a fan, making it ideal for delicate samples. The electronically adjustable air flap allows for precise control of fresh air admixture, ensuring optimal conditions. Safety is a priority with features like adjustable overtemperature protection, the AutoSAFETY system, and audible/visual alarms. Additionally, the Memmert IN55plus includes AtmoCONTROL software, enabling efficient data management through USB or Ethernet connections. INCLUDED: TheMemmert IN55plus Natural Convection Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

Gilson PIPETMAN G P200G, 20-200 µL, Metal Ejector PipetteFeatures - Made of PVDF and stainless steel (more), PIPETMAN Goffers premium durability - One of the lowest pipetting forces commercially available - redesigned piston assembly system and high-quality piston grease,PIPETMAN G guarantees hours of comfortable pipetting. - N G clipejector allows for convenient access to serviceableparts. - Pipettes come in either single or multichannel models equipped with metaltip ejectors - Volume range of 2 to 20µL - 3 year manufacturer's warranty - Optional accessories allow for greater comfort while pipetting - Multi-colored heads allow for quick and easy pipette exchange PIPETMAN® G brings a new level of comfort into Gilson range with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. PIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting. PIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Made of PVDF and stainless steel, PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G P200G, 20-200 µL, Metal Ejector Pipette includes: - Operator's Guide - 3 Year Manufacturer Warranty Gilson PIPETMAN G P200G, 20-200 µL, Metal Ejector Pipette SpecificationsAdjustable or Fixed VolumeAdjustable VolumePipette TypeManual Air DisplacementVolume Range20 - 200 µLPipette ModelP200GPipette RangePIPETMAN GNumber of Channels1Ejector TypeMetalPack Size1Pack Size UnitEachWarranty3 YearsComparison of ModelsSpecificationP2G (0.2-2 µL)P10G (1-10 µL)P20G (2-20 µL)P100G (10-100 µL)P200G (20-200 µL)P1000G (100-1000 µL)P5000G (500-5000 µL)P10mLG (1-10 mL)Adjustable or Fixed VolumeAdjustable VolumeAdjustable VolumeAdjustable VolumeAdjustable VolumeAdjustable VolumeAdjustable VolumeAdjustable VolumeAdjustable VolumePipette TypeManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementManual Air DisplacementVolume Range0.2-2 µL1-10 µL2-20 µL10-100 µL20-200 µL100-1000 µL500-5000 µL1-10 mLNumber of Channels11111111.comparison-table tr td:nth-child(6) { background-color: #fffacd; }