Ohaus HOHTDG HT Lysing Homogenizer

Dispersion rod S 25 KV - 25G for IKA T25 digital ULTRA-TURRAX New material in original packaging For (more) homogenizer IKA T25 digital ULTRA-TURRAX Model: S 25 KV - 25 G (S25KV-25G) Processed capacity (H2O): 0.05 - 2 l Stator diameter: 25 mm Rotor diameter: 17 mm Stator-rotor gap: 0.5 mm Max. permissible speed : 25000 rpm Peripheral speed : 22.2 m/s Immersion depth : 40 - 225 mm Total length : 270 mm Material in contact with the product : FFPM / SIC, AISI 316L, AISI 302 pH 2 - 13 Solvent resistant : yes Max. working temperature : 220 °C Sterilization methods : all methods Vacuum : 1 mbar Max. pressure : 6 bar Final fineness, suspension : 15 - 50 µm Final fineness, emulsions : 1 - 10 µm Weight : 0.6 kg

Scilogex D160 Homogenizer Package - Drive Motor DS-160/10 The Scilogex D160 Homogenizer can rapidly  (more)homogenize, disperse, and emulsify samples from 0.1-250ml solids or liquid media depending on the generating probe. During operation, the suspended material is drawn into the core of the homogenizer by a rotor turning at up to 30,000rpm. The material is repeatedly cycled through narrow slits in the probe where it is rapidly sheared and disintegrated by high shear. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in a few seconds. Little, if any, heat is produced during the process. Package includes: Drive motor- DS-160/10, 10mm diameter generator, flat head open slot, 115mm immerse length, H-370 stand. INCLUDED: The Scilogex D160 Homogenizer Package - Drive Motor DS-160/10 includes: - H-370 Stand - D160 Drive Motor - 10mm Dia. Generator Probe - 115mm Generator Shaft - Holding Clamp - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark BeadBlaster Microtube Homogenizer The BeadBlaster 24 completely lyses, grinds and homogeni (more)zes a broad variety of biological samples. Even the most difficult and resistant samples are fully homogenized, often in 35 seconds or less. The stainless steel tube carrier subjects up to 24 samples to an optimized, high speed, 3D motion, producing high energy impacts between the samples and micro-beads to release cellular contents. After homogenization, samples can be centrifuged and the supernatant collected for further processing. Operating parameters for the BeadBlaster 24 are set and displayed digitally. To protect fragile, heat sensitive samples, the unit can be programmed to operate in shortened consecutive cycles with a rest period in between. Up to 50 such programs can be stored in memory and recalled for future use. A transparent lid allows for visualization of samples, and features a mechanical lid lock that prevents opening owhen the BeadBlaster is in operation. A brushless motor reduces motor noise and provides maintenance free operation. Benchmark offers an assortment of prefilled tube kits for a variety of sample types. The popular Triple-Pure kits include acid washed, heat treated, zirconium beads. The beads are tested to be free of nucleases, making them ideal for molecular biology applications. A convenient starter kit (D1032-SK) is available to accommodate a broad range of sample types and optimize applications. Click Here to View Product Video INCLUDED: The Benchmark BeadBlaster Microtube Homogenizer includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ultrasonic homogenizer for extraction, emulsification and cell separation. This is a professional ho (more)mogenizer that uses intensive high frequency sound to induce cavitation in liquids. It can be used for non-biological emulsification, dispersion, cavitation, mixing, homogenization, extraction, cleaning and for catalytic chemical reactions. Widely used in biochemistry, microbiology, medical chemicals, pharmacy, experiment, etc. Stable probe with a diameter of 16 mm made of titanium alloy, acid and alkali resistant. 304 stainless steel transducer. Enables efficient and constant work, longer service life and longer service life. Processing volume: 20 – 500 ml. Frequency range: 20kHz (automatic tracking) Output power: 600W (0-100% adjustable) Work timer: 1s-99 hours Diameter of the probe: Ø 16 mm.

Ohaus light-duty orbital shakers These reliable OHAUS laboratory shakers are instruments designed fo (more)r applications with loads up to 4 kg. To optimize sample mixing, two stirring orbits and speed ranges are available. One digital model intended for use with microplates, two digital models designed for use with accessories, and an affordable analog unit for daily shaking. All models are equipped with triple eccentric drive and integrated chip control systems that ensure precise, stable and reliable platform shaking for laboratories and beyond. - Flexible: with tray and a non-slip mat or, by removing the mat, the unit can be customized with over 20 accessories - Affordable and efficient for daily laboratory shaking needs Applications ELISA tests, cell cultures, immunoassays, protein studies, bacterial and yeast cultures, dyes / bleaches, absorption techniques, DNA studies Display Easy-to-read independent LED displays with speed and time information that allow the operator to view both settings simultaneously (digital models) and knobs with markings for basic controls (analog models). Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum Construction features Non-slip mat (29.9x22.2 cm) included in all models except the model with microplates

Rotavapores pilot-scale RE-THE Series. Volumes of evaporation of 5 to 100 liters. Rotation Control a (more)nd digital temperature. Adjustable temperature up to 99ºC (optional bath oil temp. max. 180 ° C). Vacuum up to 3 mBar. Evaporation capacity of water of 2 to 9 L, depending on the model. Elevation of arm power. Bath and structure in stainless steel. Rubber gaskets teflon. Condenser vertical spiral with auxiliary unit for models with higher volumes. Optional: vacuum pump and chillers. It shows the price of the model RE-5. For other models refer to drop-down. Contact Galileo for information on optional accessories.

The scales is designed for weighing patients in health care facilities and in clinics. It is equippe (more)d with indicator PUE C315 series comprising a backlit LCD display and 5-button keyboard ensuring simple operation of scale basic functions. Personal scales is supplied either by mains or by batteries. The model without height-meter has an indicator attached to the weighing platform. It is manufactured as a dual range instrument.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW