Harvard Pump Model 11 Elite Pump Syringe Pump Spritzenpumpe 70-4500

Black Stone BL7916 pH Controller and Pump Modèle : BL7916D pH Controller and Pump pH Range : 0.00 to (more) 14.00 PH Power supply : 230 VAC 15% 50/60 HZ (40 W)

Diaphragm vacuum pump KNF N022AN.18 Final pressure/ultimate vacuum (abs.) (mbar): 181 mbar (see phot (more)o) Model: N022AN18 Technical specifications: Voltage: 230 V, 50 Hz Current: 0.7 A Power: 100 W Max. pressure: 4 Bar Pump flow rate: 15 l / min External dimensions (W) x (D) x (H): 28 x 20 x 23 cm Equipment tested Year of manufacture: 2007

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition, and powers on, we are unable to test it further at our facility. This item is fitted with 3-Phase 32amp plug.

KNF IP65 FEM 1.02 ST.18RCP Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The FEM 1.02 ST.18RCP version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 FEM 1.02 ST.18RCP Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards mXDS3 Dry Scroll Pump Ultimate Pressure 0.1 mbar (0.075 Torr) Pumping Speed 2.06 CFM (3.5 m (more)^3/h^-1) Inlet Connection DN 16 ISO-KF (NW16) Features - Weighs in at just 17.2 lb. (7.8 kg) and comes with a purpose-made carry handle making it highly portable - Can typically be mounted horizontally or vertically and for convenient connection - Inlet can be orientated vertically or horizontally with a push-fit alternative available as an accessory - Delivers 2.06 CFM (3.5 m^3/h^-1) peak speed at 60Hz and 0.1 mbar ultimate pressure - Gas ballast facility incorporated in the design as standard for water vapour handling and an exhaust valve - Oil-free pump with no oil to top up, replace or dispose of - Optimized fan cooling is beneficial in reducing noise for quieter operation and a pleasant working environment - Low maintenance, with tip seal changes required over typically 2 years The Edwards Vacuum range of small dry scroll pumps is expanding with the introduction of the compact mXDS3 and mXDS3s Dry Scroll Pumps. The new mXDS3 dry scroll pump delivers 1.77 CFM (3 m^3/h^-1) pumping speed at 50Hz or 2.06 CFM (3.5 m^3/h^-1) together with an ultimate pressure of 0.1 mbar making it well suited for backing turbomolecular pumps. The mXDS3 is the standard option supplied with no inlet valve fitted, while the mXDS3s comes factory fitted with an inlet valve featuring delay opening. The mXDS3s is also supplied with an exhaust silencer. Both offer the same vacuum performance and feature an IEC connector for main supply and an on/off switch for easy control. This compact dry pump offers flexibility to the system designer and end user alike with a wide range of accessories available to choose from to meet your configuration requirements. This standard variant of the mXDS3 comes with a single phase 115V, 50/60Hz motor. Click Here to View Product Video INCLUDED: The Edwards mXDS3 Dry Scroll Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Overall Size of cell (DxWxH): 160 x 120 x 180 mm Gel Size (WxH): 80 x 73 mm Inner Plate (WxH): 101 x (more) 73 mm Outer Plater (WxH): 101 x 83 mm Precast Gel Compatibility: Ready Gels Voltage Limit: 600 VDC and 15 watts Weight: 1 kg Output: Constant voltage, constant current with automatic crossover Voltage: 10 V to 300 V, fully adjustable in 1 V steps Current: 5 mA to 400 mA, fully adjustable in 1 mA steps Power: 75 W Terminals: 4 pair recessed female banana jacks, floating in parallel Timer: 001 to 999 minutes, fully adjustable Ripple: ±1% (at 300 V and 75 W) Line regulation: ±0.5% (at 300 V and 750 W) Load regulation: ±1% (at 300 V for a 50% change in output load) Drift: ±1% (after 30 min warm up at 300 V and 75 W) Voltage stability : ±1 V Current stability : ±1 mA Dimensions (DxWxH): 290 x 210 x 80 mm Weight: 1.8 kg

ElectroThermal Electric Bunsen Burner This was removed from a university lab where it was surplus to (more) requirements. The unit powers up and is in good working order. It is in reasonable cosmetic condition but has marks and burn lines from use.

Hermle 4 x 1000mL Swing-Out Rotor for Hermle Z496K The largest capacity swing-out centrifuge rotor i (more)n the Hermle family, the Z496-1000-AC can handle up to 4 x 750L bottles at a time with the included rectangular buckets, or 40 x 50mL or 96 x 15mL tubes, making it the perfect choice for blood banks, cannabis extraction and other high-volume centrifugation. This centrifuge rotor is designed for us only with the Hermle Z496K universal centrifuge and offers these performance specs:Max speed: 4200 rpm ; Max RCF: 3964xgINCLUDED: The Hermle 4 x 1000mL Swing-Out Rotor for Hermle Z496K includes: - 4 x Z496-1000-RBUK Rectangular Buckets - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Block, 54 x 0.5ml The Benchmark Block (for 54 x 0.5ml) for use with the MultiTherm Heating (more) Shaker or MultiTherm Heating and Cooling Shaker INCLUDED: The Benchmark Block, 54 x 0.5ml includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty