Diaphragm vacuum pump KNF N022AN.18

The N 840.3 FT.40.18 is a two-stage pump with an integrated “self-drying” system for automatic conde (more)nsate drain. The “SD” series is widely used in laboratories, especially when the vapors are humid and a clean and ecological vacuum is required. Typical applications are: vacuum ovens (for drying chemicals, drying biological samples, heat treatments), autoclaves for sterilizing instruments, containers, filters and textiles. Thanks to the use of anti-corrosion materials, it is possible to vacuum even corrosive products. The heart of the pump is the diaphragm with differentiated structure in PTFE, optimized to guarantee high performance with reduced dimensions and at the same time, long life even in heavy applications. When the humid gases are sucked in, it can happen that condensation forms in the pump head: consequently the performance decreases, considerably increasing the emptying time. To eliminate condensation, the 'drying system' then opens a solenoid valve that allows ambient air to enter the heads. Once the condensation has been eliminated, the solenoid valve closes and the pump sucks from the stove in full capacity. Over time, condensation could form again and then the cycle is repeated. The time interval between one cycle and the next can be adjusted as desired, as well as the duration of the air injection. Technical features Flow Rate (max.) 34 l / min Ultimate Vacuum (max.) 10 mbar (abs.) Pressure (max.) 1 bar (rel.) Permissible Medium Temperature 5-40°C Valve Material FFPM Diaphragm Material PTFE coated Pump Head Material PTFE Applications Rotary evaporation Vacuum oven Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant PTFE / FFPM flow path Ideal for extremely aggressive / corrosive gases and vapors Compact, silent and reliable The self-drying system removes condensation without altering the vacuum level Maintenance free Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

ACCELA pump and autosampler for HPLC THERMO SCIENTIFIC ACCELA pump that does not start ACCELA autosa (more)mpler not tested To be considered for parts

This Edwards 8 E2M8 Two Stage Rotary Vane Vacuum Pump was removed from a university lab where it was (more) surplus to requirements. The unit has been professionally serviced and is in full working order. It performs to 3.5 x 10 - 3. It is in good cosmetic condition with minor marks.

VACUUBRAND ME 8C NT Chemistry Diaphragm Pump Ultimate Vacuum 70 mbar Max. pumping speed at 60 Hz 4 (more).6 cfm Number of Heads/Stages 4/1 Features - Outstanding chemical resistance and superior vapor tolerance - Exceptionally high performance even at low vacuum - Compact design - Whisper quiet and very low vibration - Long diaphragm life, maintenance-free drive system Chemistry-design diaphragm pumps are an excellent solution for continuous, oil-free pumping of corrosive gases and vapors. The one-stage construction provides the advantageous combination of high pumping speed and low ultimate vacuum down to 70 mbar. All major parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms for increased reliability and extended operating life. These large pumps have an exceptionally high pumping speed. The NT-series features further improved performance data and superior vapor tolerance. Large one-stage chemistry-design diaphragm pumps are an excellent choice for pumping large amounts of gases and vapors. They do not consume water and therefore do not produce any contaminated waste water. Typical applications are degassing of liquids, multiport filtrations e. g. on vacuum networks and in general evaporation of low boiling solvents. We recommend these pumps especially for processes with large gas flow at high process pressures.INCLUDED: The VACUUBRAND ME 8C NT Chemistry Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF UN811KVP IP20-T Diaphragm Pump< Ultimate Vacuum 100 mbar Maximum Flow Rate 13L/min (.78 m3/h (more)) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Compact, quiet and reliable - Small footprint - Can handle wet vapors without damage - Maintenance-free The KNFUN811KVP IP20-T Diaphragm Pump has an extremely small footprint with big use.It features a PTFE-coated diaphragm, making it ideal for aggressive orcorrosive gasses & vapors. With a flow rate of 13L/min, and a ultimatevacuum or 75 torr, the KNF UN811KVP IP20-T Diaphragm Pump is a compact,powerful, fast & reliable vacuum, made for clean results. This pump is 115V. INCLUDED: The KNF UN811KVP IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer Documentation - 1 Year Manufacturer's Warranty

Edwards nXDS10iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS10iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS10iC Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Incubateur / étuve BINDER BD-115 avec convection forcée 100°C (Remarque il s'agit d'une KB-115 avec  (more)le système de réfrigération qui ne fonctionne plus) Capacité : 115 litres Gamme de température : Température ambiante plus 5 °C à 100 °C porte intérieure en verre Affichage numérique de la température intégré 2 étagères Alimentation: 230 V Fréquence: 50-60 Hz Puissance: 460 W Dimensions intérieurs : 60 x 40 x 48 cm Dimensions hors tout : 83 x 70 x 101 cm Poids: 106 kg Testé à 37°C

Olympus BH-2 Microscope w/ 5 x Objectives SPlan 10PL 20PL 40PL Lab This item was removed from a univ (more)ersity lab where it was surplus to requirement. It is in good cosmetic condition and in good working order. Eyepieces; - 2 x Olympus WHK 10x/20 L Objectives; - SPlan 10PL 0.30 160/0.17 - SPlan 20PL 0.46 160/0.17 - SPlan100 1.25 oil 160/0.17 - Kyowa A4 0.10 160/- - SPlan 40PL 0.70 160/0.17

2 x SYElectronics 6 Button Keypad Controllers These were removed from a university lab where it was (more) surplus to requirements. Both are in reasonably good cosmetic condition but we were unable to test them at our facility.

Gilson PIPETMAN G Multichannel P12x300G, 30-300 uL Pipette Designed PIPETMAN G brings a new level of (more) comfort into the Gilson range, with a redesigned piston mechanism that reduces the force needed to aspirate and dispense liquids. PIPETMAN G maintains the trusted durability, accuracy, and reliability of the original PIPETMAN pipettes with comfort. Pipetting ComfortPIPETMAN G offers one of the lowest pipetting forces commercially available. With a redesigned piston assembly system and high quality piston grease, PIPETMAN G guarantees hours of comfortable pipetting.Reliable ResultsPIPETMAN G relies on the legendary accuracy, precision, and reliability of PIPETMAN with improved pipetting comfort. Built-to-Last and ConvenientMade of PVDF and stainless steel, the PIPETMAN G offers premium durability. The PIPETMAN G clip ejector allows for convenient access to serviceable parts. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN G Multichannel P12x300G, 30-300 uL Pipette includes: - Operator's Guide - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Accuris PR2122-N-25BLK qMAX Multiplex One-Step RT-qPCR Kit, No ROX, 2500 Reactions (1x25ml, 2x1.25ml (more)) qMAX Probe One Step Multiplex kits are specifically developed and optimized for efficient probe-based detection of multiple targets in a single reaction well. The Multiplex formulation is comprised of a 20x reverse transcriptase and 2x PCR Mix preparation ideally suited for complex RNA samples including low-copy number viral RNA commonly used in the clinical and research laboratory. qMAX Probe One Step Multiplex kits have been designed to overcome the many challenges of multiplex RT-PCR, by addressing important factors such as the balance between magnesium chloride and deoxynucleotide concentrations, the relative Taq Polymerase and reverse transcriptase concentration, and the ionic conditions of the core reaction buffer. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR1001-HS-1000 Hot Start Taq Master Mix, 2X Conc., 1000 Reactions includes: - Accuris PR2122-N-25BLK qMAX Multiplex One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty