Edwards mXDS3 Dry Scroll Pump

Laboport N 820 G KNF Diaphragm vacuum pump resistant to chemical and corrosive liquids, compact and  (more)oil-free. The pump capacity is manually adjustable with a simple knob. Laboport is equipped with gas ballast, PTFE/TFM heads, PTFE lined diaphragms and FFPM valves. It is suitable for a wide range of laboratory applications, including extremely aggressive/corrosive gases and vapours. - Flow rate (max.): 34 l/min - Final vacuum (max.): 6 mbar (abs.) - Adjustable speed control - ATEX compliant only for internal atmosphere (Ex) II 2/-G IIB+H2 T3 - Ideal for extremely aggressive/corrosive gases and vapours - Clean operation, 100% oil-free Technical features - Flow rate (max.): 20 l/min - Final vacuum (max.): 6 mbar (abs.) - Pressure (max.): 0.1 bar (rel.) - Permissible fluid temperature between 5 and 40°C - Valve material: FFPM - Diaphragm material: PTFE coated - Pump head material: PTFE Applications - Centrifugal concentration - Degassing - Drying - Distillation - Drying of the gel - Rotary evaporation - Solid phase extraction Qualitative characteristics - Adjustable speed control - ATEX compliant only for internal atmosphere (Ex) II 2 / -G IIB + H2 T3 - Ideal for extremely aggressive / corrosive gases and vapors - Chemically resistant PTFE / FFPM flow path - Clean operation, 100% oil-free - Compact, silent and reliable - Maintenance free - Small footprint to optimize workspace Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION Presentations of the Laboport line directly from the specialists who created it. English subtitles. Presentation of the new Laborports and SMART KNF control.

Portable suction system, vacuum pump ROCKER BIOVAC 240 New equipment (never used) Max. vacuum : 720  (more)mmHg Max. flow rate : 38 l//min Hose barb : 3/16 inch Pump type: Piston Dimension (LxWxH) : 53x24x35cm Suction bottle：PC (3000ml)

Formulatrix Tempest V.2 Liquid Handler with Pumping Box This item was removed from a university labo (more)ratory where it was surplus to requirements. The liquid handler and pump box are in good cosmetic condition, and power on. The previous client has reported that the system is not in working order, as it requires a PF shared control valve (Mantis CF solenoid). Due to the client's statement, this system is listed as Spares/Repair. Software and a compatible computer are required for operation. Components:- Formulatrix Tempest V.2 - Serial No.: 0117 - Pump Box V2.1 - Serial No.: 0169 Includes:- 18 x Silicone Nozzle Strip-HV 0.35mm (PN: 207459_A) - 7 x Silicone Nozzle Strip-HV 0.15mm (PN: 204694) - 7 x Low Volume Silicone Chips (Volume 1 µL & 0.2 µL) - 1 x High Volume Silicone Chip (Volume 5 µL & 1 µL) - Tube connectors - 2 x Holders

VACUUBRAND AK Inlet Separator/Catchpot for VACUU-PURE Screw Pumps For Use With VACUU-PURE Screw Pum (more)ps Catchpot Volume 500 ml Ambient Operating Temperature 10°C to 40°C Features - For VACUU·PURE Screw Pumps - Direct mounting at the inlet, compact and leak-tight - High conductance - Direct visibility of condensate through the coated round bottom flask - Easy draining of condensate The VACUUBRAND AK Inlet Separator/Catchpot is an essential accessory designed specifically for VACUU·PURE Screw Pumps. It facilitates direct mounting at the pump's inlet, ensuring a compact and leak-tight integration with a leakage rate of 10-4 mbar l/s. This separator features high conductance and includes a 500 ml round bottom flask made of glass, which offers excellent chemical resistance and clear visibility of the condensate. The separator is equipped with a KF DN 25 connection and a DN 15 mm hose nozzle for straightforward setup. Its design allows for easy drainage of condensate, making it both functional and user-friendly, ideal for protecting the vacuum pump from particles and liquid droplets. INCLUDED: The VACUUBRAND AK Inlet Separator/Catchpot for VACUU-PURE Screw Pumps includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF IP65 FEM 1.02 FT.18RCP Liquid PumpKNF SIMDOS diaphragm pumps offer a variety of options to suit  (more)most laboratory liquid metering and dosing needs. The FEM 1.02 ST.18RCP version has a liquid transfer flow rate of 0.03 – 200 mL/min and discreet dosing volumes of 0.03 – 999 mL. It is constructed with the following chemically-resistant flow path materials: stainless steel head, PTFE covered diaphragm, and FFKM valves. The easy-to-read display combined with a touch control knob makes programming and access of all functions very intuitive. Besides onboard manual control, this pump offers analog control, start/stop and reset/prime TTL logic control, output signal fault alarm, and RS 232 PC control. A RC control interface cable and RS 232 cable with D-Sub 9 connector are included. A foot switch for start and stop impulses is available. All SIMDOS pumps are simple and intuitive to operate, compact, and quiet, making them a welcome addition to any business or academic lab. They are effective against pressures of up to 85 psig and transfer viscous media up to 500 centistokes (reduced flow rate above 150 cSt). The integrated software permits the transfer parameters to be modified for a range of different viscosities at the touch of a button. With a durable and IP65 splash-proof design, these pumps are maintenance free, and provide trouble-free ±2% accuracy and ±1% repeatability performance. SIMDOS 02 pumps are self-priming up to 6.6 feet of water, and can run dry indefinitely without damage. Also, unlike peristaltic pumps, there are no troublesome tubing to break or fatigue. INCLUDED: The KNF IP65 FEM 1.02 FT.18RCP Liquid Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Hermle Z326K refrigerated centrifuge. Adjustable temperature from -20 ºC to 40 ºC with pre-cooling.  (more)Maximum speed (depending on rotor) 18,000 rpm/23542 xg. Maximum capacity 4*100 mL. Storage up to 99 programs. Timer up to 99 h 59 min or continuous. Low noise level <63 dB. Imbalance alarms and overspeed protection. Includes angular rotor with maximum speed of 6,000 rpm and capacity for 6 50 mL falcon-type tubes and adapters for 15 mL tubes. Dimensions: 400*700*360 mm; 60 kg. User manual. The Hermle Z326 K centrifuge is high-quality laboratory equipment with exceptional performance. This centrifuge is ideal for a wide range of sample separation and purification applications. In addition, it has an advanced cooling system that allows for quiet and efficient operation.

F1 Mass Standard - knob weights without adjustment chamber - set (1 mg - 5 kg), plastic box Number o (more)f pieces in the set: 28

The HX7.4 H/Z scale is a device constructed on the basis of a PUE HX7 terminal and a ground-embedded (more) 4-load-cell platform, both manufactured using the AISI 304 stainless steel. The device&#39;s high protection class, IP66 / IP68, makes it suitable for use in industry. HX7.4 H/Z Comfort of operation is guaranteed thanks to a clear-cut menu, and a colour display featuring a 9-diode bar graph blinking red and green when signalling current net mass of a load in reference to the scale range or declared min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. The terminal&#39;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The frame for recessing (foundation) is part of the set &ndash; you will receive it with the ordered scale.

The HX7 H is a mechanical design combining into one a PUE HX7 terminal and a 4-load-cell platform, b (more)oth made of stainless steel. High protection class, IP66 / IP68, makes the HX7 H a scale that can be used in harsh industrial conditions. 4 load cells guarantee correct weighing regardless of load placing at the platform. Equipment The scale provides 7&quot; colour graphic display and a bar graph consisting of 9 diodes emiting red and green light. The bar graph is a graphic visualisation of the current net weight referred either to the scale range or predetermined min and max thresholds. Housing back is equipped with hermetic communication interfaces such as RS232, RS485, USB, Ethernet, at your disposal there are also digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, controlling/signalling devices, systems for automatic process control, superior IT systems. With use of the bracket you can either place the terminal at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases The terminal&#39;s software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal&rsquo;s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety.

IKA Vortex 2 Vortexer Type of Movement Orbital Speed Range 500 to 2,500 RPM Shaking Stroke 4 mm Fea (more)tures - Touch function - Suitable for continuous operation (low heat due to ventilation of motor) - Stable operation at high speeds due to silicon base feet - Infinitely adjustable speed range - Various applications possible because of 3 interchangeable attachments and 7 inserts (e.g. Eppendorf tubes, microtiter plates, Erlenmeyer flasks 250 ml etc.), these need to be ordered separately - Attachments securely click onto appliance in any position - Special strap (VG 3.36) ensures easy handling of round/Erlenmeyer flasks - Sturdy metal die cast housing The IKA Vortex 2 is a versatile vortex shaker suitable for both touch operation and continuous operation. It features an infinitely adjustable speed range, making it ideal for various applications with three interchangeable attachments and seven inserts, including tubes, microtiter plates, and 250 ml Erlenmeyer flasks. The sturdy metal die-cast housing and silicon base feet ensure stable operation at high speeds. Attachments securely click onto the appliance in any position, and a special strap (VG 3.36) ensures easy handling of round/Erlenmeyer flasks. The shaker operates with an orbital movement and a shaking stroke of 4 mm, supporting a permissible shaking weight of 0.4 kg. It offers a speed range of 500 - 2500 rpm and features a touch function for convenience. The IKA Vortex 2 has dimensions of 120 x 140 x 138 mm and weighs 3.9 kg, with a motor rating input of 42 W and an output of 11 W.