KNF IP65 FEM 1.02 ST.18RCP Liquid Pump

Technical features Flow rate (max.) 21 l / min Ultimate vacuum (max.) 2 mbar (abs.) Operating pressu (more)re (max.) 0.5 bar (rel.) Permitted fluid temperature 5-40°C FFPM valve material Membrane material PTFE coating PPS pump head material Applications Rotary evaporators Distillation Centrifugal concentrators Aspiration of fluids Qualitative characteristics Clean operation, 100% oil free High suction speed, especially in the low vacuum range Adjustable speed control Exceptionally quiet Corrosion resistant Maintenance free INCLUDED: The KNF N920KT.29.18G diaphragm pump includes: - Power cord - Operator's guide - Manufacturer's documentation - 1 year manufacturer's warranty Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

This listing is for 1 of 2 Watson Marlow SCIQ 323 Peristaltic Pump. The unit is in full working con (more)dition and is ready for immidate realese. The Sci-Q 323 range is designed exclusively for scientific pumping needs, and brings a stunning level of performance and quality to the benchtop.   323S high-performance manual control variable speed pump • High-performance microprocessor controlled pumps • 323S can be extended with 313X extension pumpheads to five channels • Flow rates to 2000ml/min and 133:1 speed control ratio   323S speed adjusts in 1rpm steps from 3 to 400rpm. keypad lock prevents tampering or accidental changes, auto restart for mains failure recovery, switchable between 100-120V or 220-240V, MemoDose facility for accurate single shot dosing.   323S drives may also be fitted with 314 four roller pumpheads if lower pulsing is required, or with 313D2 or 314D2 pumpheads which accept 2.4mm wall thickness tubing for higher pressure operation or pumping more viscous fluids.   For low-flow pumping, up to ten channels, 323S drives may be fitted with 314MC (four-roller) microcassette pumpheads, which can be extended to ten channels by adding one 314MCX or 318MCX extension pumphead. This pump is fitted with one 314MC head and will be supplied with an additional spare 314MC as per images   Serial# H041702   Dims 27cm (D) x 22cm (W) x 12cm (H)

Lowara E-SV 10SV18F075T Vertical Multistage Pump Lab This item was removed from a university where i (more)t was surplus to requirement. It is in good cosmetic condition, and powers on, we are unable to test it further at our facility. This item is fitted with 3-Phase 32amp plug.

Scilogex STORM5000 Chemical Resistant Diaphragm Vacuum Pump The Scilogex STORM5000 and STORM5000C di (more)aphragm vacuum pumpsare durable and chemical resistant. All contact surfaces are PTFE coated.STORM5000.STORM5000C vacuum pumps come with a liquid inlet trap and vacuumregulator making it a perfect choice for vacuum filtration, desiccation, andother mid-range vacuum applications. They are also bleach resistant, allowingthem to be used with cell culture decontamination protocols. INCLUDED: The Scilogex STORM5000 Chemical Resistant Diaphragm Vacuum Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Edwards nXDS15i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases an (more)d bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally.Click Here to View Product Video INCLUDED: The Edwards nXDS15i Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS15i Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement17.1 m3h-1 / 10.1 ft3min-1Peak pumping speed15.1 m3h-1 / 8.9 ft3min-1Ultimate vacuum (total pressure)0.007 mbar / 0.005 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed9.9Maximum continuous inlet pressure200 mbarMotor power 1-ph300 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.2 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsSpecificationEdwards nXDS6iEdwards nXDS10iEdwards nXDS15iEdwards nXDS20iNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.8 / 4.012.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Amorgard ScrubKart Mobile Hand Wash Station was removed from a university lab where it was surp (more)lus to requirements. We were assured by the site that it is in good working order. The unit powers up but we did not test it further. It is in good cosmetic condition with some marks from use. Included with it are 4 x 10L Liquid Containers. 2 for clean water, and 2 for wastewater. Dimensions:L 65cm x W 75cm x H 1456cm

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Multifunctional scales TMX H is designed to fast and precise determination of mass in industrial con (more)ditions. TMX H Multifunctional scales TMX H comprises terminal PUE 5 and a weighing platform. Labelling system series TMX H is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

IKA A11 Basic Analytical Mill Operating Principle Cutting / Impact Max. Speed 28,000 RPM Feed Hard (more)ness Max. 6 Mohs Features - Moist and gluey materials can be pulverized by adding water - Grinding chamber made of Tefcel (PTFE, glass fiber-reinforced) with stainless steel inlet (1.4571), useful volume 80 ml (incl. with delivery). For embrittlement of grinding materials with liquid nitrogen in the grinding chamber - Optionally, a 250 ml grinding chamber is available - Can cool mill feed with dry ice or liquid nitrogen for processing sensitive materials. - Small footprint with high performance, ideal for laboratory use. The IKA A11 Basic Analytical Mill is a versatile batch mill designed for two different grinding procedures. It features impact grinding for hard, brittle, or non-elastic materials using a high-grade stainless steel beater, suitable for materials with a Mohs hardness up to 6. It also supports cutting grinding for pulverizing soft, fibrous materials with an optional cutting blade. The mill can pulverize moist and gluey materials by adding water and includes an 80 ml Tefcel (PTFE, glass fiber-reinforced) grinding chamber with a stainless steel inlet, with an optional 250 ml chamber available. Capable of cooling the mill feed with dry ice or liquid nitrogen, it operates at a maximum speed of 28,000 rpm with a circumferential speed of 53 m/s. The compact design measures 85 x 240 x 85 mm and weighs 1.5 kg, making it suitable for laboratory environments with temperatures from 5 to 40 °C and humidity up to 80%. The A11 Basic Analytical Mill offers precise and efficient grinding with a motor rating input of 160 W and output of 100 W, ensuring reliable performance for various grinding applications.INCLUDED: The IKA A11 Basic Analytical Mill includes: - A 11 basic Analytical mill - A 11.1 Spare beater - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA A11 Basic Analytical Mill SpecificationsProcess typebatchOperating principlecutting/impactMotor rating input160 WMotor rating output100 WSpeed max.28000 rpmCircumferential speed max.53 m/sUseable volume max.80 mlFeed hardness max.6 MohsFeed grain size max. 10 mmMaterial beater/cutter stainless steel 1.4034Material milling chamber stainless steel 1.4571Power-ON time1 minPower-OFF time10 minMill feed can be cooled in milling chamber with dry iceyesMill feed can be cooled in milling chamber with liquid nitrogenyesDimensions (W x H x D)85 x 240 x 85 mmWeight1.5 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 43Voltage220 - 230 / 100 - 115 VFrequency50/60 HzPower input160 W