B. Braun Certomat H Heating Unit Heizlüfter Heizmodule Heizung Heater

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Kendro Revco Ultra Low Temperature Freezer ULT1386-3-V39 This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and is working but would not drop below -70˚C in testing which we don't think is cold enough to consider this s a fully working unit. It is sold for Spares/repairs

*Previously sold item, recently found in the stock count.* This Sanyo MDF-U74V VIP Series Ultra Low  (more)Temperature Freezer was removed from a university lab where it was surplus to requirements. The unit powers up and achieved -80˚C in testing. We left it on overnight. It is in good cosmetic condition with some minor marks from use. Internal dimensions - D58.5 W87 H140cm3 Shelves - 53.5 x 85.5cm

Raypa BOD-2 water/oil bath. 5 L capacity. Temperature range: ambient +5º to 200º C. Stability ± 0.4º (more) C, homogeneity ± 2º C. Digital with 1 ºC resolution. Timer up to 99.5 h. Drain tap. Stainless steel. Safety thermostat. Dimensions 12 x 29.5 x 14 cm. User manual. Raypa BOD-2 thermostatic baths have digital temperature regulation and reading by microprocessor with P.I.D. action. and a PT100 temperature probe, which gives them high precision. They also have a safety thermostat with manual reset that disconnects the equipment when activated.

Heidolph MR-Hei Standard hot plate stirrer. Maximum temperature of the plate 300 °C (250 °C of the s (more)ample), accuracy ± 1 °C, heating power of 820W. Speed up to 1400 rpm. Maximum capacity 20L. Ceramic coated 145 mm Ø plate. Heidolph MR Hei-Standard hot plate stirrers are suitable for all standard applications. They have protection against overheating that turns off the equipment if the set temperature is exceeded by 25 °C. Rotation uniformity even at very low revolutions. Suitable for continuous operation. Chemically resistant.

Polyscience CA05A1P1-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C, 1740W, 1 (more)20VACFeatures - Large, full-color touchscreen display with intuitive interface and support for five different languages - Compact, portable design takes up less floor space - Cooling at ambient temperatures as high as 30°C - Choice of pumps and compressor size - DynamicFilter™ self-cleaning filter system - Front fill reservoir - Liquid level monitoring to prevent pump failure - Ultraviolet anti-biological light system - User-adjustable temperature, pressure, and flow rate alarms - Heat up to 70°C, without additional options; ideal for applications, such as lasers, that must be brought to a temperature above ambient before operation can begin - External temperature tracking and communications capability (optional) - Cool Command™, WhisperCool® Your browser does not support iframes.*3D model is solely for visualization and may not depict the actual appearance of your product. DuraChill® is preprogrammed to change its own air filter once a month for a two year period and can be adjusted to suit your operating environment. DuraChill Chillers offer a conveniently located front fill reservoir. You no longer have to go to the back of the chiller top open to fill the reservoir. These high-performance chillers utilize Polyscience's exclusive patent-pending Whispercool noise reduction system. Stableand reliable cooling for many common heat removal applications, including laseretching, AA furnaces, ICP, rotary evaporators, vacuum systems, reactionvessels, plasma etching, and condenser cooling. Click Here to View Product Video INCLUDED: The Polyscience CA05A1P1-41AA1N Durachill Chiller , -10°C to 70°C, 1740W; 120V is brand-new . Includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - Full 2 Year Parts and Labor Warranty - Two sets of Inlet/Outlet Adapters: ½ inch male NPT x ½ inch hose barb and ½ inch male NPT x 5/8 inch hose barb Polyscience CA05A1P1-41AA1N Durachill Chiller with Positive Displacement Pump, -10 to 70°C, 1740W, 120VAC SpecificationsPart NumberCA05A1P1-41AA1NCooling Capacity @ 20°C1.74 kWCooling Capacity @ 10°C1.29 kWCooling Capacity @ 0°C0.77 kWFluid Temperature Range-10 to 70°C / 14 to 158°FTemperature Stability±0.1°CTemperature Display Units°C or °FDisplayable Pressure UnitsPSI or kPaPump Inlet and Outlet½ inch female NPTConnectivityRS-232, USB Serial Port Emulation, USB TMC, Dry Contact On/Off/StatusPump Pressure Range45 to 100 psi / 310 to 689 kPaMaximum Pump Flow Rate2.6 gpm / 9.8 lpmPower Requirements120V, 60Hz, 17.3AShipping Weight172 lbs / 78.1 kgShipping Dimensions33 x 22 x 33 in / 84 x 56 x 84 cmComparison of ModelsSpecificationPolyscience CA02A1P1-41AA1NPolyscience CA02A1T1-41AA1NPolyscience CA03A1P1-41AA1NPolyscience CA03A1T1-41AA1NPolyscience CA05A1P1-41AA1NPolyscience CA05A1T1-41AA1NPolyscience CA10A3P2-41AA1NPolyscience CA10A3T1-41AA1NCooling Capacity @ 20°C (kW)0.85 kW0.85 kW1.4 kW1.4 kW1.74 kW1.74 kW2.9 kW2.9 kWCooling Capacity @ 10°C (kW)0.6 kW0.6 kW0.99 kW0.99 kW1.29 kW1.29 kW1.93 kW1.93 kWCooling Capacity @ 0°C (kW)0.4 kW0.4 kW0.53 kW0.53 kW0.77 kW0.77 kW1.0 kW1.0 kWFluid Temperature Range (°C/°F)-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°F-10 to 70°C / 14 to 158°FPump Pressure Range (psi/kPa)45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa45 to 100 psi / 310 to 689 kPa20 to 90 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPa20 to 100 psi / 138 to 689 kPaMaximum Pump Flow Rate (gpm/lpm)2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm2.6 gpm / 9.8 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpm3.5 gpm / 13.2 lpmPower Requirements (Voltage/Hz)120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz120V, 60Hz230V, 60Hz230V, 60Hz.comparison-table tr td:nth-child(6) { background-color: #fffacd; }

Technical features Flow rate: 0.03-20ml / min Programmable dosage: from 0-999 ml Suction height (max (more).): 2 mWg Operating pressure (max.): 6 bar (rel.) Weight 0.9 kg Permitted fluid temperature: 5-80°C Permitted ambient temperature: 5-40°C Valve material: Kalrez® FFKM Membrane material: PTFE coating, FFKM Pump head material: PTFE, PP, Stainless steel, PVDF Applications Liquid dosing / measuring Qualitative characteristics Small footprint Simple and intuitive use Manual and analog control and RS232 interface Self-priming, it can run dry Constant and reliable flow rate Available with different material configurations for chemical resistance Simple calibration Pump head materials: PP, PVDF, PTFE Membrane materials PTFE coating, FFKM Valve material: FFKM Kalrez Download the data sheet for further information and accessories. NOT SURE WHICH VACUUM PUMPS YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

Program list: See photo’s Maximum allowable pressure: 2.8 bar Maximum allowable temparature: 142°C W (more)ater supply: Distilled or deionized water Average water consumption per cycle: 3.5 L Required air supply: 3 – 6 bar Maximum load: Instruments – 30 kg, Textiles – 17 kg, Liquids – 21 Liter Chamber volume: 84 L Chamber dimensions (⌀xD): 413 x 610 mm Dimensions (WxHxD): 735 x 945 x 600 mm Weight: 170 kg

Beckman Coulter Bench-top Optima TLX Ultracentrifuge This was removed from a university lab where it (more) was surplus to requirements. The unit powers up but does not run. The door locking vacuum and temperature features work, but it does not spin. We tested it with a TL series rotor (not included). It is in good cosmetic condition, with marks from age & use.

Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 256 L (9 cu.ft.)cu.ft.) Features - 256 L volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V offers a substantial 256-liter capacity, making it ideal for laboratories that require precise temperature control for larger sample volumes. With a setting temperature range from 0°C to +70°C and an accuracy of 0.1°C, this incubator ensures consistent, reliable results across a variety of applications. The energy-efficient Peltier heating and cooling system, along with the ControlCOCKPIT digital PID-microprocessor controller and high-definition TFT-color display, allows for intuitive control and easy monitoring. The SetpointWAIT function ensures the process begins only when the target temperature is reached, enhancing accuracy and performance. This incubator is also environmentally friendly, featuring a refrigerant-free design that maximizes energy efficiency. The durable stainless steel interior and textured stainless steel exterior are corrosion-resistant, ensuring long-term durability in demanding lab environments. With the capacity to hold up to nine shelves and a maximum chamber load of 661 lbs, the IPP260eco is versatile enough to handle a wide range of samples. Safety is paramount, with an adjustable electronic overtemperature monitor, mechanical temperature limiter, and autodiagnostic system for fault analysis, providing peace of mind during operation. This incubator delivers superior performance with a focus on sustainability and reliability. INCLUDED: The Memmert IPP260eco Peltier-Cooled Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Pfeiffer MVP 015-2 Diaphragm Pump Final Pressure 3.5 hPa / 2.625 Torr / 3.5 mbar Maximum Pumping Sp (more)eed 0.7 m3/h / 0.41202 cfm / 11.6669 l/min Number of Heads/Stages 2/2 Features - Diaphragm pump with a pumping speed of up to 0.7 m3/h - No hydrocarbons, completely dry & oil-free diaphragm pump - Low noise level, minimal vibrations and compact design, ideal also for use in laboratories - Low operating costs thanks to the highest quality, short maintenance times and long maintenance intervals - Suitable for all voltages worldwide The Pfeiffer MVP 015-2 Diaphragm Pump is a high-performance, completely dry and oil-free diaphragm pump that operates without hydrocarbons. With a maximum pumping speed of 0.7 m3/h and a final pressure of 3.5 hPa / 2.625 Torr / 3.5 mbar, this pump is designed for efficiency and durability. It features two heads and two stages, ensuring robust operation. The pump is also equipped with gas ballast to handle a final pressure up to 4.5 hPa / 3.375 Torr / 4.5 mbar. Its compact design, low noise level, and minimal vibrations make it ideally suited for laboratory use. It operates with low maintenance costs and long intervals between maintenance. The MVP 015-2 supports all worldwide voltages and includes features like forced convection air cooling and an integral leak rate of 5 x 10-4 Pa m3/s. Both the intake and exhaust pressures can handle up to 1,100 hPa. For connections, it utilizes G 1/8" flanges, with the exhaust incorporating a silencer. This pump is also cTUVus certified according to UL / CSA 61010-1, ensuring compliance with safety standards, and is classified under protection degree IP20/Type 1. INCLUDED: The Pfeiffer MVP 015-2 Diaphragm Pump includes: - Silencer - G 1/8" Elbow Union w/ Enclosed Hose DN 6 x 1000 mm w/ a Straight Union in G 1/4" at End - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty