Fisher Scientific FB65499 General Lab Compact Filtration Vacuum Pump Vakuumpumpe

This listing is for a KNF Laboport N 840.3 FT.18 Diaphragm Vacuum Pump.The unit is in full working c (more)ondition and is ready for immediate release.Chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.100% oil-free displacement, so media cannot be contaminated by transfer, evacuation or compressionHigh resistance to vapours and condensatesChemically resistant, suitable for use with very aggressive and corrosive gases and vapoursMaintenance-free, environmentally friendly; the pumps use no water and so produce no contaminated waste waterApplication: Fluid aspiration, degassing, gel drying, rotary evaporation, centrifugal concentration, distillation.Includes diaphragm with patented tension optimisation, which allows the pump size to be smaller and extends the service life of the diaphragm. All parts that come into contact with the media are comprised of chemically resistant fluorinated plastics.

This Thermo Scientific Accela HPLC System was removed from a university lab where it was surplus to  (more)requirements. The system powers up but has not been tested further at our facility. The system is in very good cosmetic condition with only minor marks from use. Included are; 1 x Thermo Scientific Accela PDA Detector.1 x Thermo Scientific Accela Autosampler.1 x Thermo Scientific 1250 Pump.Set of Accessories

VACUUBRAND ME 4R NT Diaphragm Pump Ultimate Vacuum 100 mbar (75 torr) Maximum Pumping Speed 2.5 cfm (more) at 60Hz Number of Heads/Stages 2/1 Features - Contamination-free pumping, evacuation and compression - High flow rate even near ultimate vacuum - Adjustment of outlet pressure and vacuum level with regulator valves - Very low vibration - Exceptionally long diaphragm life and maintenance-free drive system for low lifetime costs This one-stage diaphragm pump works as a vacuum generator and as well as a compressor. All parts in contact with pumped media are made of aluminum and selected plastics (PTFE diaphragms and valves). They enable a wide range of applications for non-corrosive gases. The inlet and outlet connections of the ME 4R NT are equipped with regulator valves for vacuum and overpressure, respectively. Both the compression pressure and vacuum level can be adjusted. Inlet vacuum level and outlet pressure are indicated by manometers. This one-stage diaphragm pump is an excellent choice for continuous, oil-free pumping and evacuation of non-corrosive gases and also for compression. Typical applications are vacuum ovens, pressure and vacuum filtrations and generation of compressed, absolutely oil-free air. Inlet- and outlet pressure can be adjusted continuously using the regulator valves. The manometers on inlet- and outlet side enable easy setting of the desired vacuum and pressure levels.INCLUDED: The VACUUBRAND ME 4R NT Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA MVP 10 Basic Vacuum Pump Pump Rate Max. 1.7 m³/h (28.3 l/min) Ultimate Vacuum 7 mbar Protection (more) Class IP 54 Features - Designed for dry, oil-free applications with a diaphragm pump made of PTFE or PTFE compounds for chemical resistance. - Slimline, compact design ensures space-saving installation and long service life. - Simple maintenance and straightforward servicing for ease of use. - Operates quietly at 65 dB(A), suitable for laboratory environments. - Includes a gas ballast valve for handling condensable vapors and preventing pump oil contamination. The IKA MVP 10 Basic Vacuum Pump is an essential tool designed for dry, oil-free applications in laboratory settings. Featuring a robust diaphragm pump constructed from PTFE and PTFE compounds, it ensures exceptional chemical resistance and reliability. Its compact, space-saving design and quiet operation at 65 dB(A) make it ideal for environments where noise levels are a concern. Simple maintenance procedures and a gas ballast valve for managing condensable vapors further enhance its usability, making the MVP 10 a dependable choice for various vacuum applications. INCLUDED: The IKA MVP 10 Basic Vacuum Pump includes: - MVP 10 basic vacuum pump - Vacuum hose - Silencer - Y hose connector 8 mm - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA MVP 10 Basic Vacuum Pump SpecificationsPump rate max. (50/60Hz)1.7 m³/hPump rate max. (50/60Hz)28.3 l/minFinal pressure without gas ballast7 mbarFinal pressure with gas ballast15 mbarSuction levels2Cylinder2Connection diameter suction side10 mmConnection diameter pressure side10 mmGas ballast valve yes Input pressure 7 - 1050 mbarSpeed (50Hz)1380 rpmSpeed (60Hz)1680 rpmNoise at low. pressure65 dB(A)Mode automaticyesMode manualyesMode pump %yesMode programyesDimensions (W x H x D)245 x 155 x 320 mmWeight11.5 kgPermissible ambient temperature10 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 54Voltage230 / 115 / 100 VFrequency50/60 HzPower input180 W

Edwards nXDS20iR Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. Unlike the standard nXDS20i, the Edwards nXDS20iR isdesigned for specialist applications such as gas recirculation, rare gaspumping and recovery or other applications where the dilution of the pumped gasis undesirable, or where sealing is integral to minimizing potential gas loss. Click Here to View Product Video INCLUDED: The Edwards nXDS20iR Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS20iR Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement28.0 m3h-1 / 16.5 ft3min-1Peak pumping speed22.0 m3h-1 / 13.0 ft3min-1Ultimate vacuum (total pressure)0.030 mbar / 0.022 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed10Maximum continuous inlet pressure50 mbarMotor power 1-ph260 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.6 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsSpecificationEdwards nXDS6iREdwards nXDS10iREdwards nXDS15iREdwards nXDS20iRNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The Schott titration device type T80-20 is ideal for carrying out manual titrations and dosing using (more) the simple push-button operation. This device can be used, among other things, for equivalence point determinations. Burette capacity: 20mL Dimensions (WxDxH): 130 x 200 x 290 mm

F1 Mass Standard - knob weights without adjustment chamber. Nominal value - 200 g.

Eppendorf F-35-8-24 Fixed Angle Rotor Cat No. 022822187 Eppendorf F-35-8-24 Fixed Angle Rotor is nev (more)er used, new in unopened box. Capacity of 8 x 25ml. The F-35-8-24 is used for the Vacufuge Plus Vacuum Concentrator. INCLUDED: The Eppendorf F-35-8-24 Fixed Angle Rotor Cat No. 022822187 includes: - Full 1 Year Parts and Labor Warranty Eppendorf F-35-8-24 Fixed Angle Rotor SpecificationsMax Speed1,400 RPMMax RCF240 x gMax Capacity8 x 25 mL