Ohaus HB1DG Digital Dry Block Heater, 1 Block

This item has just arrived in our stock. Please enquire for further details.

Corepoint Scientific PF051WWW-0M30 -27C to -33C Solid Door Freestanding Undercounter Laboratory Free (more)zer Temperature Setpoint Range -27°C to -33°C Capacity 4 cu. ft. Defrost Method Manual Features - Microprocessor temperature controller with digital display - Audible and visual high and low temperature alarms - Two probes: one in air and one in sample bottle - Remote alarm contacts for added security - Keyed door lock with magnetic gasket for positive seal - Recessed door handle and leveling legs - LED interior light and probe access port - Environmentally friendly HFC-free refrigerant (R600a) and foam insulation The Corepoint Scientific PF051WWW-0M30 is a high-performance freestanding undercounter laboratory freezer designed to maintain temperatures between -27°C to -33°C. It features a microprocessor temperature controller and digital display for precise temperature control, verification, and recovery. The unit is equipped with audible and visual high and low temperature alarms, remote alarm contacts, and two probes (one in air and one in a sample bottle) to ensure the security of critical samples. It has a solid swing door, a keyed lock, and a magnetic door gasket for a positive seal. Inside, the freezer includes three adjustable shelves with a guard rail to prevent products from being pushed against the back wall, a bottom footed shelf for air circulation, and a back wall evaporator cover. Additional features include a recessed door handle, leveling legs, LED interior light, and a probe access port. The white cabinet and door are insulated with high-density urethane foam, and the freezer uses environmentally friendly HFC-free refrigerant (R290) and foam insulation, ensuring sustainable and efficient operation. INCLUDED: The Corepoint Scientific PF051WWW-0M30 -27C to -33C Solid Door Freestanding Undercounter Laboratory Freezer includes: - Key for Door Lock - 3 x Adjustable Shelves - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V Temperature Range Ambien (more)t +20°C to 210°C Temperature Distribution Accuracy ± 2.0°C (at 210°C) Chamber Volume 90L Features - High precision controller allows high performance temperature control and display of CO2 and power discharge - Heat tightness and insulation design of the chamber achieves an energy saving rate of about 40% at constant temperature compared to previous models - Maximum temperature reaching time reduced by 15 minutes (no-load) compared to previous models - Program operation with a maximum of 99 steps, 99 patterns repeatable - Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes - Data acquisition from internal test device possible because of cable holes - Easy system upgrade with various option settings Energy saving, programmable 90L forced convection eco-oven with lower power consumption and CO2 emission. High precision controller allows high performance temperature control and display of CO₂ and power discharge. Program operation with a maximum of 99 steps, 99 patterns repeatable. Standard equipped with various support functions such as calibration offset, power failure recovery mode, save and access of user setting information, as well as other operation modes. Data acquisition from internal test devices is possible because of cable holes. Easy system upgrade with various option settings. Operating temp ambient +20~210°C. INCLUDED: The Yamato DNE-401 Programmable Energy Saving Forced Convection Oven 90L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert UF30 Forced Circulation Oven 32L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 32 L (1.13 cu.ft.) Features - Internal volume of 32 L (1.13 cu.ft.) for flexible applications - Working temperature range from min. 10°C above ambient up to +300°C with a resolution of 0.1°C up to 99.9°C and 0.5°C from 100°C - Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps, with pre-heated fresh air admixture - Adjustable electronic overtemperature monitor and mechanical temperature limiter for safety - Easy-to-clean stainless steel interior, reinforced with deep drawn ribbing and integrated heating on four sides - AtmoCONTROL software for managing and transferring data via USB or Ethernet interface - Three freely selectable calibration values and digital timer adjustable from 1 minute to 99 days - Fully insulated stainless steel doors with 2-point locking and inner glass doors The Memmert UF30 Forced Circulation Oven 32L, 115V is engineered for precise temperature control and uniform heat distribution, making it ideal for a wide range of laboratory and industrial applications. This model offers a spacious 32L (1.13 cu.ft.) capacity and operates within a setting temperature range from +20 to +300°C, accommodating diverse heating requirements. Its advanced ControlCOCKPIT system features an adaptive digital PID-microprocessor controller with a high-definition TFT-color display, allowing intuitive programming and monitoring. The oven includes a Pt100 temperature sensor in a 4-wire circuit, ensuring consistent readings and effective mutual monitoring. To further enhance accuracy, the adjustable parameters cover Celsius or Fahrenheit temperature settings, air flap position, program time, and even time zones, supported by SetpointWAIT technology, which starts the process time only once the set temperature is achieved. Built with durability and hygiene in mind, this unit features a fully insulated stainless steel door with inner glass, providing secure two-point locking to maintain a stable environment. The oven's stainless steel interior is not only easy to clean but reinforced with deep drawn ribbing and protected large-area heating on all four sides for reliable performance. An integrated auto-diagnostic system aids in fault analysis, and the adjustable overtemperature monitor and mechanical limiter add layers of safety to its operation. The unit comes with a works calibration certificate for +160°C, validating its performance standards. Designed with a user-friendly AtmoCONTROL software for data logging and programming, the Memmert UF30 Oven is an all-encompassing solution for precise and reliable heating tasks. INCLUDED: TheMemmert UF30 Forced Circulation Oven 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Bio-Rad Column Heater 1250426 for two columns from 5 cm to 30 cm long and from 60 to 120 mm in diame (more)ter. Temperature Range from ambient +5°C to 150°C. Accuracy of ±2° C. Stability of ±0.1° C.Safety thermostat. User manual.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Labconco 20-Port ManifoldManifoldincludes 20 neoprene valves with molded plastic knobs that accommod (more)ate both1/2" and 3/4" adapters for connection of flasks.Manifolds aremade of type 304 stainless steel and mount atop FreeZone Freeze Dryers. INCLUDED: The Labconco 7522300 20-Port Manifold includes: - Neoprene Valves x 20 (accomodates 1/2" & 3/4" adapters) - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 80ml Complete Fast-Freeze Flask Complete Flask consists of 7542200Flask Bottom, 7544000 Fla (more)sk Top and a supply of filter paper.Fast-Freeze Flasks attach withadapters to valve ports on Labconco Drying Chambers and Manifolds. They areavailable in clear or amber-colored glass. A complete Fast-Freeze Flaskconsists of a rubber top, glass bottom and a supply of filter paper.Tops, bottoms and filter paper areavailable separately as replacement components. Adapters are available inborosilicate glass or stainless steel. Fast-Freeze Flasks and Adapters arecompatible with any brand freeze dryer that has 1/2" or 3/4" diametervalve ports.Glass flasks withstand maximumtemperature of 490º C. Flask toppers withstand a maximum temperature of450º C. INCLUDED: The Labconco 7540200 80 ml Complete Fast-Freeze Flask includes: - Flask Bottom & Top - Supply of Filter Paper - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Angular rotor for centrifuge F45-36-8 EPPENDORF New equipment in its original packaging The Eppendor (more)f F-45-36-8 fixed angle rotor is intended for use in the Eppendorf 5415D and 5415R centrifuges. Reference: F45-36-8 13200 rpm 36X0.5ml 16.110 x g With lid

Medonic M16 is the analyzer for the mainstream laboratory that prioritizes quality results from a qu (more)ality cell counter. Equipped with MPA and built-in mixer. Color Touch Screen 16/20 parameters 60 samples per hour QC program External Barcode reader Micro Capillary Adapter Built-in Five-sample mixer 240V / 100W

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.