VACUUBRAND MD 4C VARIO Select Chemistry Diaphragm Pump

Technical features Flow rate (max.) 6 l / min Final vacuum (max.) 100 mbar (abs.) Pressure (max.) 2. (more)4 bar (rel.) Permissible fluid temperature 5-40 ° C Valve material: FFPM Diaphragm material PTFE coated Pump head material: PPS Applications Filtration Aspiration of liquids Solid phase extraction Qualitative characteristics Clean operation, 100% oil-free Corrosion resistant Compact, silent and reliable Ecological Maintenance free Download the data sheet for further information and accessories NOT SURE WHICH VACUUM PUMP YOU NEED? Try following our guide to KNF pumps: VACUUM PUMPS FOR THE LABORATORY Or download the KNF guide: THE IDEAL DIAPHRAGM PUMP FOR EVERY APPLICATION

GILSON MiniPuls 3 Peristaltic Pump M312 2 Channels Voltage: 220-240V, 50/60Hz Power: 45VA Speed: 0-4 (more)8 rpm Standard Flow Rate: 0.3 µL/min – 30 mL/min at 0.5 MPa max pressure High Flow Rate: 1 mL/min – 220 mL/min at 0.3 MPa max pressure Pump Head Speed: Adjustable 0 to 48 rpm with 0.01 rpm increments at 9.99 rpm and 0.1 rpm increments at 10 rpm Standard Model Tubing Diameter: 0.25–4 mm (ID) High Flow Tubing Diameter: 2–8 mm (ID) External Dimensions (W) x (D) x (H): 15 x 17.5 x 29.5 cm

Watson Marlow 505S Peristaltic Pump with Pumphead 508MC2 505S Manual Drive 55RPM ( 056.5821.000 ) 50 (more)8MC2 Eight Roller Two Channel Micro Pumphead ( 053.6280.000 ) Maximum rotor speed : 55 – 220 RPM 100-120 V / 220-240 V | 50/60 Hz | 50 W This unit is in excellent working condition and very clean cosmetically. Feel free to contact with any questions.

This Edwards ECB8 Rotary Vane Vacuum Pump was removed from a university lab where it was surplus to  (more)requirements. The unit powers up and has been fully tested by a service engineer. It is in full working order and did not require a service. It is in good cosmetic condition with minor marks.

Edwards RV3 Vacuum PumpFeatures - The RV is a truly versatile pump for operation throughout for your (more) operations, perfect for wet applications, dusty applications and clean dry applications. - The RV series of pumps has the highest vapour handling capacity of any rotary vane pump. This is ideally suited for your wet pumping applications such as freeze drying, extraction, filtration and gel drying. - The best-in-class anti-suck back protection prevents dust or oil mist from entering your system. The fast-acting automatic inlet valve acts within 0.4 seconds. - The universal motor in the pump covers the widest possible voltage and frequency range from a single motor. - You can service and replace parts without dismantling the pump mechanism. All parts self-align, eliminating the need for special assembly. Pump valve has "controlled" opening on power startup so that the system vacuum will never see a pressure surge on startup The RV uses a high-quality "universal" motor to cover the widest possible voltage and frequency range. A one-size Allen key is used to dismantle all parts of the RV pump. All rotor and stator parts are completely interchangeable The RV series of small oil sealed rotary vane pumps deliver excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. With over 300,000 units produced, these pumps offer proven performance that sets the industry standard for R&D and scientific pumping applications. All RV pumps are approved to UL and CSA standards by an external test house and feature our unique mode selector switch, meaning one model is suitable for both high vacuum or high throughput applications. Click Here to View Product Video INCLUDED: The Edwards RV3 Rotary Vane Vacuum Pump includes: - 1 Liter of Edwards Ultragrade 19 Oil - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

Edwards nXDS6i Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases and (more) bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally.Click Here to View Product Video INCLUDED: The Edwards nXDS6i Dry Scroll Pump includes: - Power Cord - Manufacturer's Documentation - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

1.6 mm tubing 3 rollers

MARSHALL Select MS-VP200 Chemical Protected Diaphragm Vacuum Pump, 200 mbar Ultimate Vacuum 200 mbar (more) (150 Torr) Pumping Speed 30 L/Min Number of Heads 1 Head Features - Provides clean and uncontaminated air exhaust with a built-in filter - Automatic cooling exhaust system allows for 24-hour continuous use - Customizable vacuum and gas velocity settings for specific applications - TEFLON surface treatment protects against gas corrosion, enhancing durability - Delivers a rapid pumping speed of 30 L/Min for effective operation - Weighs 7.6 kg, making it easy to transport and position The MARSHALL Select MS-VP100 Vacuum Pump is designed for efficient and reliable operation in a variety of laboratory and industrial applications. Featuring an oil-free design with a built-in filter, this vacuum pump ensures clean and uncontaminated air exhaust, making it ideal for environments where purity is crucial. The automatic cooling exhaust system enables continuous 24-hour operation, enhancing productivity and efficiency in demanding settings. The pump's adjustable pressure design allows users to fine-tune the vacuum and gas velocity to meet specific requirements, except for the GM-0.20 model. With a TEFLON surface treatment, the MS-VP100 is highly resistant to gas corrosion, ensuring long-term durability and reliable performance. With an ultimate vacuum of 200 mbar (150 Torr) and a pumping speed of 30 L/Min, the MARSHALL Select MS-VP100 delivers powerful and efficient vacuum performance. It features 6 mm inlet and outlet flanges and operates within a working temperature range of 7°C to 40°C. The pump runs quietly with a noise level of less than 60 dBa, providing a conducive working environment. Its compact design, with dimensions of 21 x 16 x 23.5 cm and a weight of 7.6 kg, makes it easy to integrate into various setups. The pump is equipped with nitrile butadiene rubber valves and requires an electrical supply of AC110/220V, 50/60Hz. The vibrant orange look of the MS-VP100 not only adds a distinctive aesthetic but also signifies its anticorrosive capabilities, making it a reliable choice for diverse vacuum applications.INCLUDED: The MARSHALL Select MS-VP200 Chemical Protected Diaphragm Vacuum Pump, 200 mbar includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

ZD421t (ZD4A042-30EM00EZ) - printer suitable for printing thermal and thermal transfer self-adhesive (more) labels. The maximum width of the media is 108 mm, with the maximum print on the width of 104 mm. As standard, it has a built-in movable label sensor. Printing takes place at speeds up to 152 mm / s, printing resolution 203 dpi. The printer is equipped with a USB port. The basic version of the printer does not include a dispenser and a cutter.

Labconco RapidVapVacuum Evaporation System with Lid HeaterAdvanced vacuum function Microprocessor  (more) controls vacuum at preset level; Automatic vacuum release if power fails LCD shows vacuum level from 0 to 999mbar Rear-mounted vacuum connections: vacuum port, tubing clamps, lid heater receptacle, 30 in.L (76cm) 0.5 in. I.D. tubing for connection to accessory vacuum pump Safety features Lexan™ shield on clear glass lid protects against glass implosion Dual lid clamps hold lid securely in place for vacuum-tight seal Phenol-free gasket provides complete sealing under vacuum PTFE-coated aluminum chamber Audible/visual alarm for end point detected by temperature sensors at heater and block Optional Lid Heater 40w heater plugs into electrical receptacle on rear Eliminates fogging, increases visibility when evaporating water or other high-boiling-point solvents Improved control panel Easy-to-read LCD display prompts operator to program desired parameters, and displays vortex speed by percentage, actual and set temperatures in C, and total time remaining in minutes. Enter up to nine different protocols into memory for easy repetition of exact test parameters Advanced heating system Contamination- and maintenance-free 1000-watt dry block heating system speeds evaporation rate by supplying a controlled amount of heat from ambient up to 100C Heater and sample block move in tandem for more efficient heat transfer Alarm signals completion of run, allowing samples to be left unattended while evaporating to desired endpoint Efficient operation Brushless DC motor ensures safe, maintenance-free operation and provides smooth, variable-speed power up to 1000rpm Produces no potentially dangerous sparks Increased durability Systems may be used with broad range of strong chemicals Powder-coated, aluminum cabinet base with smooth, solvent-resistant acrylic/PVC thermoplastic upper housing Aluminum chamber with PTFE coating conducts heat efficiently and resists corrosion All mechanical components are isolated from chemical fumes and vapors for longer life Chemical-resistant glass lid provides visibility of samples and detaches for cleaning Two clamps hold lid securely in place Phenol-free gasket provides sealing without potential for phenol contamination RapidVap models with optional RS-232 link allow all front panel functions to be performed and monitored from a personal computer (not included) INCLUDED: The Labconco 7900002 RapidVapVacuum Evaporation System with Lid Heater, 115V, 60Hz includes: - Vacuum Hose - Clamps x 2 - Heat Transfer Grease - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf FA-45-18-11 Fixed Angle Rotor, Cat. #: 022652061 The Eppendorf FA-45-18-11 Fixed Angle Rot (more)or, Cat. #: 022652061 accommodates 18 x 1.5/2.0 mL samples. This rotor can reach speeds up to 14,000 RPM with a maximum RCF of 16,873 x g. This Eppendorf FA-45-18-11 Fixed Angle Rotor is for use with the Eppendorf 5418 Centrifuge and Eppendorf 5418R Refrigerated Centrifuge. INCLUDED: The Eppendorf FA-45-18-11 Fixed Angle Rotor, Cat. #: 022652061 includes: - Rotor Lid - Full 1 Year Parts and Labor Warranty Eppendorf FA-45-18-11 Fixed Angle Rotor, Cat. #: 022652061 SpecificationsMaximum Speed14,000 RPMMaximum RCF16,873 x gMaximum Capacity18 x 1.5/2.0 mL TubesMaximum Radius7.7 cmCentrifuge CompatibilityEppendorf 5418/R CentrifugesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }