Stirrers

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 15 l Maximun loa (more)d: 20 kg Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Stirring bar length max: 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h): +1 K Heating temperature range: 50 – 500°C Heat control: Turning knob Temperature setting resolution of heating plate: 5 K Connection for ext. temperature sensor: PT1000 (not included) Fixed safety circuit: 550°C Set-up plate material: ceramic Set-up plate dimensions: 260 x 260 mm Heating rate (1l H2O in H1500): 5 K/min Dimensions (WxHxD): 300 x 105 x 415 mm Weight: 8.308 kg

Number of stirring positions: 1 Stirring quantity max. per stirring position (H2O): 15 l Maximun loa (more)d: 20 kg Speed adjustment: scale 0 – 6 Speed range: 100 – 1500 rpm Stirring bar length max: 80 mm Self-heating of the set-up plate by max. stirring (RT:22°C/duration:1h): +1 K Heating temperature range: 50 – 500°C Heat control: Turning knob Temperature setting resolution of heating plate: 5 K Connection for ext. temperature sensor: PT1000 (included) Fixed safety circuit: 550°C Set-up plate material: ceramic Set-up plate dimensions: 260 x 260 mm Heating rate (1l H2O in H1500): 5 K/min Dimensions (WxHxD): 300 x 105 x 415 mm Weight: 8.308 kg

The ES is an intuitive overhead stirrer ensuring safety with overload, over-current and overheating  (more)protection. Easy to install, resistant and with a small footprint, ES is your best choice for low viscosity samples. Velp ES ensures a smooth start and vigorous agitation even at maximum speed. ES can reach speeds of 1300 rpm and stir up to  15 litres. The device can manage viscosity, with a maximum of  1000 mPas. The easy chuck is easy to close and can accommodate shafts with up to 10 mm diameter and does not require any tool. Stirring speed: 50 – 1300 rpm Maximum stirring volume (H2O): 15 liters Maximum viscosity: 1000 mPas Maximum torque: 15 Ncm Construction material: technopolymer Chuck hole range: 1 – 10 mm Dimensions (WxHxD): 80 x 160 x 200 mm Weight: 1.3 kg

Maximum stirring quantity (H2O): 15 l Speed: 50 – 2000 rpm Setting accuracy speed: ±1 rpm Deviation  (more)of speed measurement (>300rpm): ±1 % Deviation of speed measurement (<300rpm): ±3 rpm Maximum viscosity: 10000 mPas Maximum torque at stirring shaft: 20 Ncm Nominal torque: 0.2 Nm Deviation of torque measurement: ±3 Ncm Torque measurement: trend Time setting range: 0 – 6000 min Connection for external temperature sensor: PT1000 Temperature measuring range: -10°C – 350°C Temperature measurement resolution: 0.1 K Dimensions (WxHxD): 70 x 193 x 154 mm Weight: 1.56 kg Equipped with: R 1342 4-bladed propeller stirrer Standard stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds. Stirrer Ø: 50 mm Shaft Ø: 8 mm Shaft length: 350 mm IKA tripod scale A stand with an integrated scale and data interface. The IKA scale provides increased comfort and safety for your laboratory applications. For example, your stirrer can hang on the stable support rod. The quantities of samples to be added are weighed immediately and continuously documented during the stirring process. Sample weight of up to 6 kg The intelligent tripod scale has a weighing range of up to 6 kg with a resolution of 1 g. It is therefore particularly suitable for the direct and controlled addition of sample material while stirring. Weighing range: 5 – 6000 g Weighing accuracy: ±6 g Plate dimension: 200 x 200 mm Dimensions (WxHxD): 213 x 570 x 391 mm Weight: 5.2 kg

Exact temperature setting via digital potentiometer Simultaneous digital display of target and actua (more)l temperatures via LCD display Actual temperature displays in medium with 0.1°C resolution when using PT1000 temperature sensor (included) Stirrer can be controlled with two microcontrollers (not included) Plate material: Glass ceramic Plate dimensions: 180 x 180 mm max. stirring capacity (H₂O): 10 L Speed range: 100 – 1500 rpm Dimensions (WxDxH): 215 x 330 x 105 mm Temperature range: 50°C to 500°C Weight: 5 kg

Speed range: 100 – 1400 rpm Max. stirring capacity (H₂O): 20 L Plate dimensions: Ø 145 mm Dimensions (more) (WxDxH): 173 x 277 x 94 mm Weight: 2.6kg

15 stirring positions, 100% maintenance-free and wear-free by inductive 2mag-Magnetic-Drive concept  (more)for powerful mixing of solutions, power reserves up to 3,000 ml per stirring point, 100% synchronized speeds, jerk-free stirring even at low speeds. Fully encapsulated and hermetically sealed stainless steel housing, IP68, water-, dust-, and germproof, extremely robust construction and performance, easy to clean and maximum resistance, submersible in water- resp. oil baths, suitable for the use in CO2-incubators and ovens. Stirring points: 15 Stirring point distance: 65 mm Stirring volume/stirring point: 1 – 3000 ml Speed range: 100 – 1,600 rpm Stirring power (max.): 40 W Material housing: Stainless steel Permitted operation conditions HT-version:  up to +200°C in air, up to +95°C in water submerged Dimensions (WxDxH): 245 x 375 x 38 mm Weight: 9.5 kg

Metrohm stirrer E 649.

Never used, new in Box Stuart SM4 Mini Magnetic Stirrer With fitting for retort rod Compact and ligh (more)tweight With fitting for retort rod Speed range: 80 to 1300 rpm Max capacity : 1 L Overall dimensions (wxdxh) : 90 x 160 x 90 mm Net weight: 1kg 230 V | 3,15 A | 50 Hz | 50 W Never used, new in Box

Stirrer for the Mettler Toledo DL series.

Small sample volume from 50ml -120ml. Continuously variable single shaft pump and stirrer with digit (more)al readout. Manual fill, drain and cleaning. Chemically compatible as standard. Particle size:Up to 600µm – sample dependent Stirrer speed: 350 – 3,500rpm Dimentions: 140mm x 175mm x 390mm Weight: 6.75kg 100-240V / 50-60Hz / 20W

Maximum stirring amount (H2O): 20 l Speed range: 0 – 1100 rpm Max stir bar length: 80 mm Plate mater (more)ial: stainless steel Plate dimensions: ∅125 mm

Speed: 100 – 1250 rpm Diameter stirring surface: 140 mm Dimensions (DxHxW): 240 x 130 x 150 mm

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

Suitable for volumes up to 10 liters (H2O) Temperature range up to 300°C Stirring speed: 0 – 1100 rp (more)m Plate diameter: 125 mm Dimensions (LxWxH): 240 x 150 x 120 mm

Stirring range: 350 to 2000 rpm Stirring capacity: 1L Maximum vessel diameter: 85 mm Power-on LED Cl (more)ear, chemically resistant nylon top surface Tough, stable plastic base Dimensions (DxWxH): 143 x 143 x 66 mm

Stirring speed: up to 1100 rpm Suitable for volumes up to 5 liters (H2O) Plate diameter: 125 mm Idea (more)lly suited for titrations Dimensions (WxHxD): 150 x 115 x 235 mm Weight: 1.5kg

Max stirring quantity (H2O): 0.25 l Maximun load: 0.5 kg Speed range: 500 – 1800 rpm Max stirring ba (more)r length: 30 mm Set-up plate material: synthetic (PP) Set-up plate dimensions: Ø 80 mm Dimensions (WxHxD): 140 x 42 x 140 mm Weight: 0.747 kg

Stirring speed range : 100 – 1000 rpm Top plate dimensions : 177 x 177 mm Dimensions (WxDxH): 195 x  (more)215 x 114 mm