Heidolph MR 3000 Magnetic Stirrer

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Yamato MG-600H-115V Magnetic Hotplate Stirrer, 115V Stirring Rate 300 to 1500rpm Max. Hot plate Tem (more)perature 250°C Stirring Capacity 100 to 2000ml x 6pcs. Features - Rotation and heating can be adjusted individually - Equipped with circuit protector - Chemical resistant ceramic coating hot plate Six point controllable magnetic stirrer with chemical resistant ceramic coating hot plate. Rotation and heating can be adjusted individually. Equipped with circuit protector. Stirring rate 300~1500rpm. Stirring capacity 100~2000 ml x 6 pcs. and maximum hot plate temp of 250°C. INCLUDED: The Yamato MG-600H-115V Magnetic Hotplate Stirrer, 115V includes: - Stirrer bar 30mm 6 pcs. - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Scilogex SCI280-Pro Circular LED Digital Hotplate Stirrer Bundle w/ PT-1000 Sensor, Sensor Stand, &a (more)mp; 50mm x 8mm Magnetic Stir Bar, 110V Speed Range 200 to 1500 RPM Temperature Range Ambient to 280C Maximum Stirring Quantity 3L Features - Heat only, stir only or heat and stir together functions - Digital temperature control with max. temperature up to 280C - Digital speed control with max. speed up to 1500rpm, with new brushless motor - Stainless steel work plate with ceramic coating provides good chemical resistant performance and easy cleaning - LED display shows temperature and speed - External temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ± 0.5C - The “HOT” warning will flash when the work plate temperature is above 50C even if the hotplate is turned off - Accessory reaction blocks for flasks and vessels available - Electronic speed control for constant speed even during changes in load - cTUVus approved for UL and CSA The Scilogex SCI280-Pro Circular LED Digital Hotplate Stirrer Bundle w/ PT-1000 Sensor, Sensor Stand, & 50mm x 8mm Magnetic Stir Bar is a very economically priced LED digital hotplate stirrer ideal for handling small volume tasks on daily application, as a low temperature magnetic stirrer with maximum temperature at 280C. This compact unit can be used as a hotplate, stirrer, or combination. INCLUDED: The Scilogex SCI280-Pro Circular LED Digital Hotplate Stirrer Bundle w/ PT-1000 Sensor, Sensor Stand, & 50mm x 8mm Magnetic Stir Bar, 110V includes: - Ceramic Coated Steel Plate - PT-1000 Temperature Sensor - Sensor Support Stand - 50mm x 8mm Magnetic Stir Bar - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex OS40-Pro Overhead LCD Digital StirrerThe Scilogex OS40-Pro Overhead LCD Digital Stirrer fea (more)tures a maximum capacity of 40L, accurate microprocessor stirring speed control guarantees speed precision, anti-spill microprocessor control slow start up prevents sample spills, a through-shaft design allows for easy adjustment of the impeller position, LCD display and control, set value and actual value can be displayed for real-time monitoring of torque and speed. INCLUDED: The Scilogex OS40-Pro Overhead LCD Digital Stirrer includes: - Key of Drill Chuck - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Scilogex MS-H380-Pro LCD Digital 5.5 x 5.5 in. Magnetic Hotplate Stirrer, ceramic plateMS-H380-Pro 5 (more).5 x 5.5 in. LCD Digital Magnetic Hotplate Stirrer Features: - Heat only, stir only or heat and stir together functions - Easy to read backlit LCD display, with independent heat and stir display - Ceramic plate for chemical resistance and easy clean - Electronic speed control for constant speed even during changes in load - Hot warning sign if temperature is above 50C - cTUVus approved for UL and CSA - 2 Year Warranty Click Here to View Product Video INCLUDED: The Scilogex MS-H380-Pro LCD Digital 5.5 x 5.5 in. Magnetic Hotplate Stirrer, ceramic plate includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA R 1302 Dissolver Stirrer Radial flow, for drawing the material to be mixed from the top and the (more) bottom. High turbulence, high shearing forces. Particle reduction. Used at medium to high speeds.Stirrer Ø: 100 mmShaft Ø: 10 mmShaft length: 350 mm INCLUDED: The IKA R 1302 Dissolver Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Intravital Microscope System - Zeiss Examiner Z1 with Accessories & Software This is being sold  (more)on behalf of a client. It is surplus to requirements. The system is in full working order, and in excellent cosmetic condition with minor marks. There are a vast amount of accessories, extras and add ons included with this system. 1. VivoTM 100 Intravital Microscopy Workstation Includes motorized research fixed stage upright microscope stand with harmonic focusing drive, 2-positionnosepiece, motorized 5-position filter cube turret, manual narrow profile long WD condenser, slider for Dodtcontrast, LED transmitted light lamphouse, two camera ports with c-mounts, crosshair reticle and dust cover. Alsoincludes direct-coupled white light LED epi illuminator, high speed 2048x2048 sCMOS Flash4.0 v2+ camera, motorizedx,y translating platform stage, 36"x36" vibration isolation table and equipment rack workstation. Windows 7 64-bit workstation with dual Six-Core Xeon 1.6GHz processors (10M L3 Cache), 16GB 2133MHz DDR4 RAM, 2GB Nvidia Quadro K620 workstation graphics card, 256GB Solid State Drive (SSD) (approx. 300MB/s sequential transfer rate),8XDVD+/-RW, 1300W power supply, backlit wired keyboard and 27" flat panel monitor. SlideBookTM software for 3D multipoint image capture and analysis and one additional offline license. System includes one day of on-site installation and training, a one year warranty on all hardware components and one year of free updates for all software components. 2. W Plan-Apochromat 40x/1.0NA Water Dipping Objective for VIVOTM Working distance 2.5mm. 3. Upgrade from LED White Light Source Direct Coupled to LED 4-Color Light Engine for Fixed Cell Imaging for Zeiss Microscopesincludes light engines for DAPI (390/18), GFP (475/28), RFP (542/27) and Cy5 (632/22) 4. Microscope Filter Cube for DA/FI/TR/Cy5 Pinkel Set (No Exciters) for LED illumination, includes quad-band dichroic and quad-band emitter Photomanipulation Equipment - 5. Ablate!TM Photoablation System for Fixed Position Illumination 532nm pulsed laser, pulse energy 60 ?J @ 200 Hz. Includes automated intensity control and Photomanipulation module for SlideBookTM. 6. Ablate!TM Epi Mount Adapter for VIVOTM Allows attachment of Ablate!TM illuminator to the epi-fluorescence port of VIVOTM workstations. Also allows attachment of a widefield epi-fluorescence light source via light guide for simultaneous illumination.7. Ablate!TM 532 Notch Dichroic for Epi Mount Light Sources transmits 532 laser, reflects visible wavelengths >90% 8. Support Kit for Ablate! 9. Microscope Filter Cube for Ablate!TM 532 Notch Dichroic and Blocker for Intensifier includes notch dichroic for 532 illumination and blocking emitter for protection of intensifier from reflection of 532 pulses The system is available for collection from Cambridge, UK, but we may be able to offer delivery of the system at an extra cost. Please enquire for a quote. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Lauda Alpha RA 8 Cooling Thermostatic Water Bath This was removed from a university lab where it was (more) surplus to requirements. The unit powers up and is in good working order. (Digital thermometer used for testing not included). It is in good cosmetic condition with minor marks.

Bruker BMU 4.0 Monitoring Unit This item was removed from a university where it was surplus to requ (more)irement. It is in good cosmetic condition and powered up, we are unable to test it further at our facility.