Heating & cooling

The 'F' PREMIUM series plasma freezers are instruments of the highest quality and with state-of-the- (more)art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F401 plasma freezer - Storage capacity (350ml plasma bags): 345 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 2000 model (measured with ethanol): - at 20°C, 2.00 kW - at 10°C, 1.50 kW - at 0°C, 1.06 kW - at -10°C, 0.68 kW - at -20°C, 0.38 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

AREC 10 Digital was designed for laboratory applications where a comfortable and large work surface  (more)is required, which here reaches 26x26 cm in size, the largest among the Velp series. The plate offers high resistance to acids, bases and solvents, while the technopolymer structure of the stirrer is designed to prevent accidental spills of liquids from reaching the electronic components, ensuring easy and quick cleaning. This translates into product safety and durability even in the most demanding laboratories; further protected by a 3-year warranty (subject to online registration). The heating uses the latest technologies available and ensures a uniform temperature across the entire plate and exceptional transfer efficiency. Same quality for agitation: SpeedServo™ technology and brushless motor offer precise and powerful agitation even when viscosity varies. In short, why we offer you AREC 10 Digital: - Easy to use and highly resistant to chemicals - Precise setting of temperature and agitation - Accepts volumes up to 25 liters / 30 kg - Possibility of precise thermoregulation of the fluid with Pt100/Pt1000 and VTF probes - Designed for durability and guaranteed for 3 years The powerful brushless motor of the AREC 10 Digital ensures stable and reliable stirring. The patented SpeedServo™ technology ensures constant speed even with variations in fluid viscosity. The always precise stirring speed, from chemical reactions to sample preparation, adjustable from 100 to 1500 rpm, it is ideal for any laboratory need. With a stirring capacity of up to 25 liters (H2O) (or 30 kg of liquid), the AREC 10 Digital stands out for its robustness and superior performance. Arec 10 reaches the remarkable temperature of +550°C in complete safety and control. Extremely precise, you can increase the temperature by +1.0°C. By connecting the external PT100 or PT1000 sensors you can directly thermoregulate the sample up to 350°C with an accuracy of ±1.0°C. Using VTF Digital instead you can control the temperature with a precision of ±0.5°C (up to a maximum of 300°C). In this regard, Arec 10 is available with different accessory packages. You will find all the combinations at the bottom. Safety during rescaling: - 'Hot surface' alarm when temperature exceeds 50°C, even when inactive. - Overtemperature alarm above 570°C 1 - Aluminum heating plate with ceramic coating 2 - Main switch 3 - Knob for stirring setting 4 - Knob for temperature setting 5 - Display

PELTIER LABORATORY INCUBATORS ILP SMART POL-EKO ILP - REFRIGERATION WITH PELTIER TECHNOLOGY ILP incu (more)bators are innovative and ecological instruments, which use the Peltier system to cool the internal chamber. They maintain a constant temperature from 0°C to 70°C, being able to drop to a maximum of 20°C below the ambient temperature. Cooling with Peltier technology gives these instruments multiple advantages: they are silent, vibration-free, precise and ecological. And then: large touch display, programming, alarms, lock, stainless steel interior and much more. Continue reading and discover all the other amazing features of these incubators! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ILP SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.3 (DIN 12880) as option - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor PELTIER TECHNOLOGY: SIMPLE AND RELIABLE The Peltier cell refrigeration system is a modern technology used in various refrigeration or heating instruments, thanks to its innate versatility. The strengths of Peltier technology are the scalability of the cooling elements, the possibility of operating anywhere, its reliability and precise power control. Furthermore, the Peltier elements work without moving parts and therefore without vibrations or noise. One of the main advantages compared to traditional compressors is that no flammable or environmentally harmful refrigerants are used and in general, the whole system is much simpler, avoiding breakdowns. To find out more, we recommend the Wikipedia page Thermoelectric cooler. In particular, for incubation, Peltier cells bring several advantages: Zero vibration - Through the use of Peltier cells, the vibrations previously generated by the compressor are eliminated. Minimal fluctuation and variation: excellent fluctuation, variation and short time to reach the set temperature. Lighter design with more space: Peltier cooling system reduces the overall size of the instrument and its weight. Ecological: Peltier technology is simple and does not use substances harmful to the environment. Below are simple operating diagrams of the ILP incubators during cooling and heating. ILP SMART SERIES The ILP series with Peltier cooling offers you four models, from 56 to 749 liters of internal volume. The models are available with two different external finishes: in light gray powder-coated sheet metal with a graphite top panel or completely in stainless steel, with a linen-like texture. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port for external sensor 3 - Temperature sensor 4 - Internal glass door 5 - Adjustable feet 6 - Stainless steel shelf 7 - Solid external door 8 - Peltier module fans 9 - Door open sensor 10 - Touch screen control panel 11 - USB port 1 - Main switch 2 - Spacer 3 - External fans of the Peltier module 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Door with viewing window - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

The new Falc Instruments laboratory instruments improved the construction quality of the structure a (more)nd are completed with a touch screen panel. Falc laboratory ovens are widely used in thermostatic applications requiring high precision. These instruments are ideal for various operations, such as drying and sterilizing laboratory glassware, as well as for material strength testing. Depending on your specific needs, you can choose a model with or without ventilation, based on the level of accuracy required. Unlike incubators, laboratory ovens can reach high temperatures, up to 300°C. The characteristics of the new Falc models: - Touch screen display - 4 language setting - Digital timer - Program saving function - Programmable delayed start Why choose the STF-N 52T model? Being the most compact stove in the series, it adapts perfectly to your laboratory, taking up minimal space on the workbench and ensuring simple, clutter-free integration. For over 50 years, Falc products have stood out for their solid and simple construction, guaranteeing durability and reliability over time. The new models have been updated with a touchscreen control panel, which simultaneously displays temperature, humidity and timer. The novelties and classics of the new Falc models: 1 - Silicone gasket: adheres perfectly to the door to maintain the set temperature, preventing heat loss and variations inside the chamber. 2 - Internal chamber made of 18/8 stainless steel. Exteriors in steel painted with anti-acid epoxy powder. Internal glass door for incubators only. 3 - Ø10mm upper hole for inserting thermometers or probes for instrument calibration. 4 - Touchscreen control panel with 4 languages ​​(Italian - English - French - Spanish) and safety class 3.1 as standard. The control's advanced functions include saving programs (temperature/maintenance/ventilation) and delayed start (day, time). 5 - Ergonomic handle with key lock. Falc chemical laboratory stoves represent the excellence of Made in Italy in the scientific instrumentation sector. Designed and manufactured with the utmost care, these stoves combine advanced temperature control technologies with rugged stainless steel construction, ensuring reliable, long-lasting performance. The double internal stainless steel chamber, combined with the pre-heating system in the pre-chamber, ensures excellent uniformity of the temperature inside. Various accessories and customization options allow you to precisely adapt them to any specific application. - Ø40mm chimney on the back for smoke exhaust/cable passage. - Chimney Ø40mm on the back, with shutter opening adjustable from the control panel with opening from 0 to 40mm. - Wifi module for remote monitoring via APP. - Shelves in perforated sheet metal. - Grid shelves. - Tables and trolleys.

MULTI-HS 6 DIGITAL VELP MAGNETIC STIRRER SAFETY AND RESISTANCE - Warning message on the display when (more) the plate reaches 50°C - The Safety Lock function prevents unintentional changes of settings in order to meet all laboratory safety standards. - The VELP CerAlTop ™ top plate is made of aluminum alloy which guarantees temperature homogeneity with excellent heat distribution and high specific power thanks to the circular configuration. A thin layer of ceramic protects the plate from scratches and chemicals and guarantees high resistance to thermal stress and thermal shock. SMART AND SIMPLE USER INTERFACE The LED display is easy to read and thanks to the intuitive icons the operator will always have an eye on the working conditions: - Active heat - Temperature set point - Activating the timer - Automatic reverse option - Lock button Two extremely precise rotary knobs control the temperature and speed setting and to start the heating you need to press the knob; a small detail that exemplifies Velp's utmost attention to operator safety. By touching both knobs simultaneously, it is possible to access the advanced menu for the most suitable configuration of all operating modes. POWER AND PRECISION - The extremely powerful Brushless motors are able to stir from 100 up to 1000 rpm, offering practically unlimited duration over time. The stirring speed is always constant, even when the viscosity changes, thanks to the SpeedServo ™ torque compensation. - The middle button allows you to set the timer for unsupervised work. The Timer can be set from 1 min up to 99 hours and more advanced configurations can be set in the advanced menu. - The Auto-reverse option improves the kinetics by changing the direction of the stirring direction. You can also set the direction change to your preferred time interval. TECHNICAL FEATURES: Stirring position distance: 100 mm. Stirring speed: 100 - 1000 rpm. Speed setting accuracy: 5 rpm. Temperature setting resolution: 1°C. Hot top warning: on display (>50°C). Timer: from 1 min to 99 h: 59 min. Timer setting steps: 1 min. Autoreverse: from 5 s to 99 min-59 s. Autoreverse setting steps: 1 s.

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 7000 model (measured with ethanol): - a 20°C, 7.00 kW - a 10°C, 5.30 kW - a 0°C, 3.70 kW - a -10°C, 2.40 kW - a -20°C, 1.50 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

LAUDA Variocool: Versatile circulation chillers from 1200W to 10 kW used between -20°C and +80°C to  (more)dissipate process heat in laboratories, small plants or production. LAUDA Variocool circulation chillers convince with their space-saving design and the versatility offered by a wide variety of options. They are circulation thermostats suitable for use with non-flammable heat transfer liquids within a moderate temperature range. The new control panel design and color TFT display make making changes very simple and intuitive. Various options in power kW, pump pressure / flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. All models (except VC 600) are available in the air-cooled or water-cooled (W) versions and equipped with fixed swivel castors. High performance circulation chillers starting with the VC 5000 are available with sound insulation or outdoor installation option. Cooling performance of the Variocool VC 1200 model (measured with ethanol): - a 20°C, 1.20 kW - a 10°C, 1.00 kW - a 0°C, 0.70 kW - a -10°C, 0.40 kW - a -20°C, 0.18 kW Notable features - Adjustable bypass for pressure limitation - Top filling opening, drain cock on the back - Integrated programmer with 150 segments, divisible into 5 programs - Electronic level indicator with low level alarm - SmartCool system for energy-saving digital control of cooling, including automatic compressor control - Temperature graphs on display Examples of specific applications - Refractometer - Polarimeter - Disposable bioreactors - Extruder for food production - Micro reactors - Reactive control in chemical / pharmaceutical environments - Climatic chambers - Spatial simulation - Electric mobility; battery test - Test benches - Stress test - Crystallization regulation - Lyophilization - Micro structures - Painting plants Accessories included Nozzles for pump connections; screw cap. Various options in power (kW), pump pressure/flow rate and tank size offer a wide range of choice for the customer, adapting better to his needs. Contact us to understand the model that best suits your needs. Simple control panel with large TFT display with lots of information. Front panel of the LAUDA Variocool easily removable for fast maintenance and modifications. Easily upgradeable with different interfaces (analog module, contact module, RS 232/485, Profibus, Ethernet-USB module). USB Type B Interface. Connections located on the back of the Variocool: inlet/outlet pump connection; bypass adjustments. Large frontal pressure display. Pump performance graph of LAUDA Variocool heating chillers. Overview of the technical characteristics of the Variocool LAUDA models. TECHNICAL VISUALIZATION 1 - Filler nozzle with cover 2 - Control panel 3 - Pressure gauge 4 - Mains switch 5 - Alarm output and module bays 6 - Front panel (ventilation openings only in case of air-cooled devices) 7 - Ventilation openings (on both sides) 8 - Four castors (front castors with locking brake) 1 - Pump connection, outflow 2 - Bypass adjusting wheel 3 - Pump connection, return flow 4 - Drain tap 5 - Connecting sleeve for water cooling outlet (only available for water- cooled devices) 6 - Connecting sleeve for water cooling intake (only available for water- cooled devices) 7 - Ventilation grid 8 - Rating label 9 - Power supply 10 - Fuses (up to and including VC 3000 (W)) 1 - Light sensor 2 - Pressure gauge 3 - Mains switch 4 - Entry key and arrow keys 5 - Soft keys (left and right) 6 - USB interface Type B (on the side of the control panel) 7 - TFT display

Guardian 2000 Ohaus - Economical, for general stirring and heating Ideal for education and laborator (more)ies requiring fast, economical daily heating and reliable stirring up to 15 litres. All three models offer a simple knob control to easily adjust the heating and/or stirring functions. The heavy-duty construction includes an optional support rod holder. Stir models include PTFE coated stir bars. ★ Safe heating up to 500°C and stirring up to 15L with an easy to use knob control ★ Rugged metal housing with spill resistant design. The smooth, chemical-resistant ceramic soleplate is easy to clean ★ Safety is of the utmost importance: the indicator light turns on when the plate exceeds 40°C, ensuring operator safety during all heating applications. Applications Boiling liquids, preparation of samples and stock solutions, buffers and dissolution reagents, preparation of media, concentration of samples Display Light indicator for hot plate, green light when unit is heating and/or stirring Functionality Simple knob control, agitation up to 1600 rpm, temperature up to 500°C (or 380°C for round plate model) power cord (included), agitation models include PTFE coated stir bar Construction Heavy duty metal housing, PET front panel, control knobs, ON/OFF switch to disconnect heater, integrated support rod holder, easy to clean ceramic coated resin, ceramic or stainless steel tops Clean and simple control panel. For education, it is designed for maximum safety in the classroom. Easy Swtich on/off for all models. Fast and secure. THE MODELS AVAILABLE: The Guardian 2000 is made up of 9 models. Models with hotplate only, with magnetic stirring only or with both. In turn, they can be chosen for the size of the plate: 102x102mm; 174x174mm; Ø135mm.

The 'F' Series Plasma Freezers offer integrated B Medical Systems multifunction electronics, with va (more)rious alarm systems, battery backup and many other control features. The system is compatible with the °B Connected solution for remote monitoring and data logging. The polypropylene frame with one-piece print is guaranteed for life against corrosion. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. This instrument complies with national and international guidelines and regulations for Medical Devices. It offers reliability, efficiency and safety at an optimal price. F291 plasma freezer - Storage capacity (350ml plasma bags): 251 - Complies with DIN 58375 - AABB Standards. Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C display - Optimized design for greater energy efficiency - Anti-corrosion structure guaranteed for life - Extensive range of functions and accessories Control Panel - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery The design - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times Standard equipment and accessories - 2 keys for opening the door - Electronics under lock and key - Automatic shutdown of the fan when the door is opened so as not to lose cold - Backup battery with a duration of approx. 48 hours - Acoustic alarms for exceeding high and low temperatures and/or general alarm - Remote alarm - Open door alarm - Hole for sensor input - One standard drawer + two adjustable shelves According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B

LABORATORY OVEN SLW SMART POL-EKO SLW - FORCED AIR CONVECTION The SLW series laboratory ovens are de (more)signed to reach high temperatures, up to 300 °C. Available from 15 to 1000 liters with latest generation control, quality materials and top-class performances. Large touchscreen, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading and you will be amazed. ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use, just like your smartphone. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - 4,3", clear, full colour touch screen - USB and LAN ports for data transfer - multi-segment time and temperature programs - loop function up to 255 times or endless - adjustable start delay feature - adjustable ramps - recording of min, average and max temperature value for each segment - overview of set and current parameters while operating - operating in temperature or time priority mode - fan speed control in the range of 0 … 100% or 10% … 100% (depending on the chamber capacity) - temperature sensor fail alarm - possibility of temperature calibration by the User - power failure control system (program continued after restoring power) - visual and sound alarm - internal memory for programs and data storage - operating with gloves on - event registry - user manual for direct download QUALITY FIRST Resistant. Durable. POL-EKO ovens are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The SLW SMART series ovens are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Powder coated sheet metal structure (graphite front panel) - Stainless steel interior - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +105°C) SLW SMART SERIES The 10 models of the SLW series cover most of your needs: from mini oven to the 1000 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view of your future ovens for drying, analysis or testing. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for incubator models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

The 'F' Series Plasma Freezers offer integrated B Medical Systems multifunction electronics, with va (more)rious alarm systems, battery backup and many other control features. The system is compatible with the °B Connected solution for remote monitoring and data logging. The polypropylene frame with one-piece print is guaranteed for life against corrosion. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. This instrument complies with national and international guidelines and regulations for Medical Devices. It offers reliability, efficiency and safety at an optimal price. F131 plasma freezer - Storage capacity (350ml plasma bags): 84 - Cold/hot temperature alarm limit: -37°C / -27°C - Complies with DIN 58375 - AABB Standards. Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with display at 0.1°C - Anti-corrosion structure guaranteed for life Control Panel - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery The design - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times Standard equipment and accessories - 2 keys for opening the door - Electronics under lock and key - Automatic shutdown of the fan when the door is opened so as not to lose cold - Backup battery with a duration of approx. 48 hours - Acoustic alarms for exceeding high and low temperatures and/or general alarm - Remote alarm - Open door alarm - Hole for sensor input - One standard drawer + two adjustable shelves According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B

'F' Series - B Medical Systems The 'F' PREMIUM series plasma freezers are instruments of the highest (more) quality and with state-of-the-art functionality. The safety standards developed by B Medical Systems define unique technical characteristics, guaranteeing the safe storage of preparations and establishing the highest safety standards for the user. ACCURATE TEMPERATURE AND GUARDED 24 HOURS - Controlled air cooling system for uniform and stable temperature distribution - Automatic defrost with stable temperature maintenance - Rapid recovery of the temperature even after numerous door openings - Safety thermostat to prevent freezing - Long autonomy in case of power failure - Acoustic and visual alarms with remote notification via SMS or email - °B Connected universal software for remote archive, report (FDA 21 CFR Part 1 compliant EFFICIENCY - US SNAP and F-GAS compliant high efficiency natural gas - High performance and low consumption compressor - Polypropylene chassis with one-piece print guaranteed for life against corrosion and fully recyclable CONVENIENCE - Easy access to parameters via 7' touch-screen - Card reader for reserved entrance or with password - Data export via USB or card reader - Anti-bacterial coating for the best cleaning - Low noise - Low heat emission - Modular internal equipment - Easy access to internal drawers-trays - Highest quality stainless steel - Set Point -41°C F501 plasma freezer - Storage capacity (350ml plasma bags): 460 - Cold/hot temperature alarm limit: -46°C / -32°C - Medical Device according to MDR (EU) 2017/745, Class IIa - Multifunction electronics with 0.1°C touchscreen display and monitoring software - Wide range of functions and accessories MULTIFUNCTION ELECTRONICS FOR MAXIMUM RELIABILITY - Multi-function electronics - Audiovisual alarm system with remote transmission in case of unexpected temperature changes and power failure - Compatible with universal connected '°B Software' for remote monitoring, logging and long-term archiving - Electronic temperature recorder - USB port for easy export of logged data - Data backup battery OPTIMIZED DESIGN FOR ENERGY EFFICIENCY - Thick polypropylene insulation, without corrosion and with perfect thermal insulation, 100% recyclable - Minimized cold air loss - Ecological refrigerant R290 - Ecological footprint reduced to a minimum STRUCTURE IMPROVED AND BUILT FOR EVERLASTING DURABILITY - Corrosion resistant structure guaranteed for life - Built by rotational molding, in high quality polypropylene for better insulation and robustness - No sharp edges for easier maintenance and cleaning - Ergonomic design for safe use at all times According to: - European Medical Device Regulation: MDR (EU) 2017/745, Class IIa(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - EMC directive: 2014 / 30 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - Low voltage directive: 2014 / 35 / EU(models: 220-240 V - 50/60 Hz & 230 V - 50 Hz) - FDA regulation-Medical Device: 21CFR Part 864.9700, Class II(models: 115-127 V - 60 Hz & 220 V - 60 Hz) - cCSAus certificate: Yes (models: 115-127 V - 60 Hz & 220 V - 60 Hz) - GMP - Clean room classification: Class ISO 6 / EC GMP B Class ISO 5 / EC GMP A

6 block dry heaters Designed for daily use in the laboratory, dry block heaters are ideal for applic (more)ations that require particular temperature stability. All units house six easily interchangeable modular blocks, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150°C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5°C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunoassays, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models) Technical Specifications

A refrigerator combined with a precision freezer for the safe storage of samples in the scientific a (more)nd medical sector - Complete display and multifunction electronics with alarm system: adjustable minimum and maximum, backup battery for data logging during power failure - One-piece construction with lifetime anti-corrosion warranty; high quality polypropylene for effective insulation and simple maintenance and cleaning - Intelligent ergonomics: easier and safer handling thanks to the positioning of the heaviest components at the bottom - High storage capacity: very versatile interior thanks to multiple intuitive guides that allow modularity STAY QUIET AND WORRY-FREE THANKS TO THE RELIABILITY OF B MEDICAL SYSTEMS - Forced air cooling system for uniform and stable temperature distribution - Rapid recovery of the temperature even in case of frequent openings of the door - Safety thermostat that prevents the internal temperature from going below zero - Extended autonomy in the event of a power failure - Audiovisual alarm system with remote transmission via SMS or email - Optional °B Connected universal software for remote monitoring, reporting (in accordance with FDA 21 CFR Part 11) and long-term archiving in combination with a data communication unit CONSTRUCTION AND TECHNOLOGY TO INCREASE THE EFFICIENCY OF THE REFRIGERATOR - Natural refrigerant with high cooling efficiency compliant with US SNAP and EU F-Gas regulations - Polypropylene cabinets injected with polyurethane foam that provides strong thermal insulation - Automatic internal LED lighting for lower energy consumption - Monobloc cabinet made with the exclusive rotational molding technique COMFORT OF USE AND DURABILITY - Smooth cleanable surfaces - Silent device - Low heat emission - Modular internal equipment - Easy data export to USB - Electronics with easily accessible temperature display - Heated gasket to minimize condensation - Corrosion resistant construction with lifetime warranty The B Medical Systems multifunction electronics of the "Precision line" series offers a complete alarm system, set point safety, battery backup, and many other control functions; compatible with the °B Connected solution for monitoring and data logging. Equipped with USB port and supplied with two keys. The main differences between the Precision line and Premium line series, in addition to the control panel, are the handle, ergonomic and patented by B Medical Systems for the premium line and the shape of the interior. Download the technical data sheet in Italian or in English for all the details.

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your oven with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Yamato SDP-400 Vacuum Oven 127.4L, 110-120V Operating Temperature Range +10-220°C Operating Pressu (more)re Range 10 - 101 kPa Internal Volume 47.2L Features - Programmable Watlow controller to perform multiple ramp and soak profiles - Digital vacuum gauge displaying vacuum level of chamber - Doors with positive latch handles and spring-loaded glass facilitating good vacuum seal - Tempered glass viewing window for safe, continuous monitoring of samples - Generous usable shelf area - Meets TUV safety requirements Discover the ultimate solution for precise temperature control and reliable vacuum performance with the SDP Series Vacuum Oven, now available in SDP400 and SDP410 models. Offering an impressive operating temperature range from room temperature +10°C to 220°C and an operating vacuum range from 40-3.0 to -29.9 inHg, this oven is a versatile addition to any laboratory. The EZ-ZONE Watlow controls ensure ease of operation, and the KF25 access port provides convenient access. Enjoy exceptional temperature uniformity, with ± 6.0% of setpoint at midrange, and remarkable stability with ± 0.2°C at 80°C, ± 0.25°C at 150°C, and ± 0.3°C at 220°C. This digital controller boasts a display resolution of 0.1°C and is constructed with high-quality materials both inside and out. The interior features 300 SST, while the exterior is made of painted cold roll steel. You'll find a silicone gasket for a standard chamber seal, and the spacious internal dimensions of W457 x D610 x H457 mm provide ample room for your samples. With a generous internal capacity of 127.4L, six sturdy shelves, each capable of holding up to 15.8 kg, and a maximum total load of 47.6 kg, this oven is ideal for a wide range of applications. The SDP Series Vacuum Oven is available in two power source options (AC110 - 120V 13A or AC220 - 240V 7A) and is a robust and dependable workhorse for your lab, weighing in at ~144kg. It comes complete with three shelves, 12 shelf clips, a power cord, and four leveling feet, making it an essential asset for your laboratory needs.INCLUDED: The Yamato SDP-400 Vacuum Oven 127.4L, 110-120V includes: - 3 Shelves - 4 Leveling Feet - 12 Shelf Clips - Power Cord - One Year Manufacturer's Warranty

Yamato SDP-300 Benchtop Vacuum Oven 47.2L, 110-120V Operating Temperature Range +10-220°C Operatin (more)g Pressure Range 10 - 101 kPa Internal Volume 47.2L Features - Programmable Watlow controller to perform multiple ramp and soak profiles - Digital vacuum gauge displaying vacuum level of chamber - Doors with positive latch handles and spring-loaded glass facilitating good vacuum seal - Tempered glass viewing window for safe, continuous monitoring of samples - Generous usable shelf area - Meets TUV safety requirements Meet the SDP Series Vacuum Oven, an indispensable addition to your laboratory toolkit. Available in both SDP300 and SDP310 models, this versatile oven offers precise control and dependable performance. With an operating temperature range from room temperature +10°C to 220°C and an operating vacuum range from 40-3.0 to -29.9 inHg, it's suitable for a wide range of applications. The EZ-ZONE Watlow controls ensure ease of use, while the KF25 access port allows for convenient access. Experience exceptional temperature uniformity, with ± 6.0% of setpoint at midrange, and remarkable stability with ± 0.1°C at 80°C, ± 0.20°C at 150°C, and ± 0.3°C at 220°C. Heat up times are impressively fast, and cool down times are efficient. This digital controller boasts a display resolution of 0.1°C and is constructed with high-quality materials both inside and out. The interior boasts 300 SST, while the exterior is made of painted cold roll steel. You'll find a silicone gasket for a standard chamber seal, and the spacious internal dimensions of W304 x D508 x H304 mm provide ample room for your samples. With a total internal capacity of 47.2L and three sturdy shelves, each capable of holding up to 15.8 kg, this oven is well-suited for various applications. The SDP Series Vacuum Oven is available in two power source options (AC110 - 120V 10A or AC220 - 240 5.5A) and is a reliable workhorse for your lab, weighing in at ~83kg. It comes complete with three shelves, a power cord, and four leveling feet, making it a versatile and essential tool for your laboratory needs.INCLUDED: The Yamato SDP-300 Benchtop Vacuum Oven 47.2L, 110-120V includes: - 3 Shelves (2 tall, 1 short bottom) - 4 Leveling Feet - Power Cord - One Year Manufacturer's Warranty

Yamato RFC-2001 Lab Freezer/Refrigerator Combo 4C, -20C, 115V Temperature Setpoint Range Freezer -20 (more)ºC / -4ºF Capacity 1982L / 70 cu.ft. Defrost Method Automatic Features - Digital temperature display - High/Low alarm - Two solid locking doors - Auto or manual defrost available - Locking casters - Adjustable shelves - CFC-free refrigerant and insulation - UL listed - Stainless exterior / interior available - Optional chart recorder Laboratory refrigerator and freezer combination unit that comes standard with microprocessor digital controller, audible and visual alarms, alarm relay contacts, casters, and locking doors. INCLUDED: The Yamato RFC-2001 Lab Freezer/Refrigerator Combo 4C, -20C, 115V includes: - Four Adjustable Shelves - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Yamato RFC-1301 Lab Freezer/Refrigerator Combo 4C, -20C, 115V Temperature Setpoint Range Freezer 0°C (more) to -25°C Capacity 1359L / 48 cu.ft. Defrost Method Automatic Features - Digital temperature display - High/Low alarm - Two solid locking doors - Auto or manual defrost available - Locking casters - Four shelves - Adjustable shelves - CFC-free refrigerant and insulation - UL listed - Stainless exterior / interior available - Optional chart recorder Laboratory refrigerator and freezer combination unit that comes standard with microprocessor digital controller, audible and visual alarms, alarm relay contacts, casters, and locking doors. INCLUDED: The Yamato RFC-1301 Lab Freezer/Refrigerator Combo 4C, -20C, 115V includes: - Four Adjustable Shelves - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Yamato DX-602C Natural Convection Oven 153L, 115V Temperature Range Ambient +5°C to 280°C Temperatu (more)re Distribution Accuracy ± 10°C at 280°C Chamber Volume 153L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-602C Natural Convection Oven 153L, 115V is designed for both economy and efficiency. It features a digital PID controller for straightforward operation, including options like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven operates within a temperature range of room temperature +5°C to 280°C, maintaining a temperature control accuracy of ±1°C and distribution accuracy of ±10°C at 280°C. It takes approximately 80 minutes to reach its maximum temperature from room temperature. This oven is built with a durable stainless-steel interior and an electro-galvanized steel sheet exterior finished with melamine resin, ensuring longevity and ease of maintenance. It's insulated with glass wool and utilizes a 1.36 kW iron-chrome wire heater. Equipped with two 33 mm exhaust ports on the top, it offers microprocessor controlled PID temperature management with digital setting and LED display options, alongside a versatile timer range. Safety is a priority, with features including self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 600x510x500mm, and the external dimensions are 700x640x830mm. The oven can support a shelf plate load of 15kg and features 12 shelf rest steps with a 35mm pitch. The Yamato DX-602C is an ideal solution for those in need of a large, reliable, and user-friendly convection oven for various applications. INCLUDED: The Yamato DX-602C Natural Convection Oven 153L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DX-402C Natural Convection Oven 74L, 115V Temperature Range Ambient +5°C to 300°C Temperatur (more)e Distribution Accuracy ± 10°C at 300°C Chamber Volume 72L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-402C Natural Convection Oven 74L, 115V is an economical, high-capacity oven designed for precision heating, featuring a spacious 74L interior. Equipped with a digital PID controller, it offers easy operation with modes like Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven efficiently maintains temperatures from room temperature +5°C to 300°C with an excellent control accuracy of ±1°C and distribution accuracy of ±10°C at 300°C. It reaches its maximum temperature in about 60 minutes. Constructed for durability, it has a stainless-steel interior and an electro-galvanized steel sheet exterior with a melamine resin baking finish. Insulation is provided by glass wool, and heating is achieved with a 1.36 kW iron-chrome wire heater. It includes two exhaust ports, each 33 mm in diameter, located on top, and features microprocessor controlled PID temperature control with digital setting and display, alongside a comprehensive timer. Safety is prioritized with self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker with overcurrent protection. The internal dimensions are 450x410x400mm, and the external dimensions are 550x540x730mm. The oven supports a shelf plate load of 15kg, offering nine shelf rest steps with a 35mm pitch. Weighing approximately 38kg, it is compatible with AC115V 14A and is an ideal choice for users needing a larger, reliable, and easy-to-use convection oven for various applications. INCLUDED: The Yamato DX-402C Natural Convection Oven 74L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DX-302C Natural Convection Oven 28L, 115V Temperature Range Ambient +5°C to 300°C Temperatur (more)e Distribution Accuracy ± 10°C at 300°C Chamber Volume 28L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-302C Natural Convection Oven is a cost-effective and user-friendly solution for precise temperature control needs. It features a digital PID controller with simple operation options, including Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven operates within a temperature range of room temperature +5°C to 300°C, with a control accuracy of ±1°C and distribution accuracy of ±10°C at 300°C. It can reach its maximum temperature in approximately 45 minutes. Constructed with a robust stainless steel interior and an electro-galvanized steel sheet exterior coated with melamine resin, this 28L oven is easy to maintain. It's insulated with glass wool and uses a 0.9 kW iron-chrome wire heater. The oven includes two 33 mm exhaust ports on top, a microprocessor-controlled PID temperature controller, digital setting and display methods, and a versatile timer. Safety features include self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker. The internal dimensions are 300x310x300mm, and external dimensions are 400x440x630mm. It can support a shelf plate load of 15kg and offers six shelf rest steps with a 35mm pitch. The oven weighs about 23kg and is compatible with AC115V 9.5A making the Yamato DX-302C an ideal choice for various precision heating requirements. INCLUDED: The Yamato DX-302C Natural Convection Oven 28L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DVS-602C Programmable Natural Convection Oven 162L, 115V Temperature Range Ambient +5°C to 2 (more)60°C Temperature Distribution Accuracy ± 5.0°C at 260°C Chamber Volume 162L Features - Excellent temperature accuracy - Easy to use and maintain - Equipped with a 6 pattern PID program controller with easy program settings (30 steps x 1, 15 steps x 2, 10 steps x 3) - Simultaneous display of set constant and measured temperature - Quick Auto stop, Auto Stop, Auto Start operations - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V offers excellent temperature accuracy and user-friendly operation. It features a 6 pattern PID program controller, capable of executing complex programs (30 steps x 1, 15 steps x 2, 10 steps x 3), and displays both set and measured temperatures simultaneously. This oven operates within a temperature range of room temperature +5 to 260°C, achieving temperature control accuracy of ±1.0°C and distribution accuracy of ±5.0°C at 260°C. It can reach its maximum temperature in approximately 90 minutes. Constructed with a stainless-steel interior and a cold rolled steel plate exterior with a melamine resin baking finish, the DVS-402C is easy to maintain. It features glass wool insulation, a 1.2kW stainless pipe heater, and includes an observation window made of chemically strengthened glass. Additional features include a cable hole, exhaust ports, a comprehensive timer, and various operation functions like Auto Start, Auto Stop, and Quick Auto-stop. Safety is ensured with self-diagnostic functions and an electric leakage breaker with overcurrent protection. The internal dimensions are 450×490×450mm, external dimensions are 560×601×820mm, and it can support a shelf plate load of about 15kg. The DVS-402C is ideal for precise, programmable heating applications. INCLUDED: The Yamato DVS-602C Programmable Natural Convection Oven 162L, 115V includes: - 2 x Stainless Steel Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V Temperature Range Ambient +5°C to 26 (more)0°C Temperature Distribution Accuracy ± 5.0°C at 260°C Chamber Volume 99L Features - Excellent temperature accuracy - Easy to use and maintain - Equipped with a 6 pattern PID program controller with easy program settings (30 steps x 1, 15 steps x 2, 10 steps x 3) - Simultaneous display of set constant and measured temperature - Quick Auto stop, Auto Stop, Auto Start operations - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V offers excellent temperature accuracy and user-friendly operation. It features a 6 pattern PID program controller, capable of executing complex programs (30 steps x 1, 15 steps x 2, 10 steps x 3), and displays both set and measured temperatures simultaneously. This oven operates within a temperature range of room temperature +5 to 260°C, achieving temperature control accuracy of ±1.0°C and distribution accuracy of ±5.0°C at 260°C. It can reach its maximum temperature in approximately 90 minutes. Constructed with a stainless-steel interior and a cold rolled steel plate exterior with a melamine resin baking finish, the DVS-402C is easy to maintain. It features glass wool insulation, a 1.2kW stainless pipe heater, and includes an observation window made of chemically strengthened glass. Additional features include a cable hole, exhaust ports, a comprehensive timer, and various operation functions like Auto Start, Auto Stop, and Quick Auto-stop. Safety is ensured with self-diagnostic functions and an electric leakage breaker with overcurrent protection. The internal dimensions are 450×490×450mm, external dimensions are 560×601×820mm, and it can support a shelf plate load of about 15kg. The DVS-402C is ideal for precise, programmable heating applications. INCLUDED: The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V includes: - 2 x Stainless Steel Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DR-201-115V Programmable High Temperature Natural Convection Oven 13.75L, 115V Temperature Ra (more)nge Ambient +5°C to 260°C Temperature Distribution Accuracy ± 5.0°C at 260°C Chamber Volume 162L Features - Wide temperature range, maximum operation temperature up to 700°C - Equipped with high operability temperature controller - Can be used as an electric furnace for ashing and sintering, but also as an incubator and drying oven - Temperature, measured temperature and overheat prevention temperature can be digitally set by operation menu and ▲/▼ keys - Easy programmable operation, fixed temperature, quick auto stop, auto stop, program auto start, auto start - Lock function, auto recovery after power failure, calibration offset The Yamato DVS-402C Programmable Natural Convection Oven 99L, 115V offers excellent temperature accuracy and user-friendly operation. It features a 6 pattern PID program controller, capable of executing complex programs (30 steps x 1, 15 steps x 2, 10 steps x 3), and displays both set and measured temperatures simultaneously. This oven operates within a temperature range of room temperature +5 to 260°C, achieving temperature control accuracy of ±1.0°C and distribution accuracy of ±5.0°C at 260°C. It can reach its maximum temperature in approximately 90 minutes. Constructed with a stainless-steel interior and a cold rolled steel plate exterior with a melamine resin baking finish, the DVS-402C is easy to maintain. It features glass wool insulation, a 1.2kW stainless pipe heater, and includes an observation window made of chemically strengthened glass. Additional features include a cable hole, exhaust ports, a comprehensive timer, and various operation functions like Auto Start, Auto Stop, and Quick Auto-stop. Safety is ensured with self-diagnostic functions and an electric leakage breaker with overcurrent protection. The internal dimensions are 450×490×450mm, external dimensions are 560×601×820mm, and it can support a shelf plate load of about 15kg. The DVS-402C is ideal for precise, programmable heating applications. INCLUDED: The Yamato DR-201-115V Programmable High Temperature Natural Convection Oven 13.75L, 115V includes: - 2 x Stainless Steel Perforated Shelves - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase Operating Temperature Ra (more)nge 40 to 200°C Operating Pressure Range 101 - 0.1kPa (760 - 1 Torr) Internal Capacity 1000L Features - Vacuum pump can be installed inside the oven - Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance - Improved working efficiency as exhaust system is improved to significantly shorten the time to reach vacuum - Use specialized function menu key and up/down key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc. - Self-diagnosis circuit (abnormal temperature sensing, heater disconnection, auto overheat prevention, SSR short circuit), overheat protector, ELB to prevent overcurrent, key lock, etc. - For safety, resin protection panel is installed at the observation window Large scale 1000L vacuum drying oven designed for treatment of large-sized parts. Quick connect / disconnect of vacuum pipes for easy vacuum pump maintenance. Because the exhaust system is improved to significantly shorten the time to reach vacuum, working efficiency is improved. Use specialized function menu key and ▲▼ key to set. With program operation function, use submenu key to operate overheat protector, deviation correction, etc. Vacuum pump can be installed inside the oven. Operating temp. range of 40~200° CINCLUDED: The Yamato DP-104C Large Capacity Programmable Vacuum Oven 1000L, 480V, 3 Phase includes: - Stainless Steel Punching Plates, 4 pcs. - Power Cord - 1 Year Manufacturer's Warranty