IKA ICC 150 Lite Pro 12 Open Bath Heating Circulator

A glove box is a hermetically sealed enclosure. It provides a working space in its inner side that i (more)s completely segregated from the outside. As an inert gas glove box it is designed to maintain in it’s inside an artificial atmosphere, typically consisting of pure nitrogen or pure argon with a concentration of oxygen and water vapour typically below 1 ppm. It is used to protect the product, which is handled inside the box from the outside, in particular from unwanted reaction with oxygen and/or water vapour (product protection).

Stainless Steel HRP EX.H Platform Wherever high readability and precision are important. Wherever go (more)od repeatability in harsh industrial conditions matters. Stainless Steel HRP EX.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP EX.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Hazardous areas are their natural environment Stainless Steel HRP EX.H Platforms have been developed in accordance with Directive 2014/34/EU and the IECEx scheme and, depending on their design, can operate in environments containing explosive gases or dust, classified as zones: 2 and 22. We have equipped them with an intrinsically safe RS 485 communication interface, which allows the platform to work with the PUE HX5.EX weighing meter. To power the platforms, we have dedicated intrinsically safe PM02.EX-1-2 or PM02.EX-2-2 power supplies. Use the potential Stainless Steel HRP EX.H Platforms work with the PUE HX5.EX weighing terminal and are compatible with RADWAG receipt printers. In addition, you will match them with appropriate antivibration tables from our offer, and thus increase the readability of your measurements. The use of stainless steel for the construction of the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing.

Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with CoverThe Scilogex Aluminum Alloy Rotor with cover ha (more)s the capacity to accomodate 24 x 1.5/2mL tubes and can a reach maximum speed of 15,000RPM. For use with the D3024 & D3024R centrifuges. INCLUDED: The Scilogex 1.5/2ml x 24 Aluminum Alloy Rotor with Cover includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards T-Station 85H Wet Turbo Station CF63, 100-120V Ultimate Pressure <5 x 10-9 mbar Inlet Con (more)nection DN 63 CF Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application The Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All the nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of the active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85the T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Wet Turbo Station CF63, 100-120V includes: - T-Station Pumping Station Base - E2M1.5 Rotary Vane Pump - nEXT85H Turbomolecular Pump with CF63 Inlet - All Necessary Tubing and Cables for Turn-key Operation - Operator's Manual - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PFEIFFER Turbomolecular TMP Vacuum Pump TMH 260 This was removed from a university lab where I was s (more)urplus to requirements. The unit has not been tested but is in good cosmetic condition with marks from use. The turbo fan blade moves freely and are in good cosmetic condition. DN 100 ISO--K, 2PMod - Nr PM P02 13019 pin DIN MALE connector port is in good cosmetic condition. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

Yamato WB-301UFB Auto Pure Benchtop Type 1 Water Purification System with Ultrafiltration Module, 12 (more)0V Configuration Benchtop Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, benchtop or wall mount water purification system in 120V with ultrafiltration that produces Type 1 deionized water. Low cost of ownership. Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals and pyrogen removal ultrafiltration. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WB-301UFB Auto Pure Benchtop Type 1 Water Purification System with Ultrafiltration Module, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX7.4 C scale is a solution based on a stainless steel PUE HX7 terminal (AISI 304) and a powder  (more)coated 4-load-cell platform. The terminal The terminal is characteristic for a 7” colour graphic display. Its novelty is a red-green 9-diode bar graph presenting the current net mass in reference to the scale range or preset min and max thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. Databases Terminal’s system of information is based on databases: users, products, weighings, packaging, formulations, customers, ALIBI memory which guarantees stored data safety. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing.