General laboratory equipment - other

This listing is for a Grant Instruments LMC-3000 CentrifugeThe Grant LMC-3000 is a low speed benchto (more)p centrifuge ideal for biomedical applications.

This listing is for a two stacked BD Phoenix M50 Automated Identification & Susceptibility Testing I (more)nstrumentThe BD Phoenix™ M50 instrument provides accurate and timely identification and susceptibility results to guide appropriate therapy and patient management decisions. The system can hold up to 50 panels at a time and can be stacked to maximize limited laboratory space. AST Panels have up to 29 antibiotics on a single panel to reduce offline testing and provide a true MIC value based on current CLSI breakpoint standards. It has demonstrated performance in detecting emerging resistance. It incorporates the use of an oxidation reduction indicator, turbidometric growth detection, full on-panel antimicrobial concentrations and the BDXpert™ System. Together these make up the Phoenix Susceptibility System resulting in rapid, accurate and reliable antimicrobial susceptibility results. These results are further enhanced by specific delayed resistance features, providing additional assurance that Phoenix results are not only rapid but accurate. The inclusion of all reported antimicrobial concentrations on the panel provides the foundation for detection of emerging resistance.Two Stacked BD Phoenix M50 Instruments with PC specifiations:Height: 42 in (107 cm)Width: 53.5 in (136 cm)Depth: 30 in (76.5 cm)Clearance (left): 3 in (7.62 cm)Clearance (right): 18 in (45.72 cm)Weight: 240 lb (109 kg)Power requirements: 90-264 VAC; 47-63 Hz 15 amp circuit

This listing is for a J.Bibby B212 Hotplate Magnetic Stirrer

Insta NX® Mag32 Automated Nucleic Acid Extractor is a modern bench top magnetic bead based system fo (more)r DNA and RNA purification from a wide range of samples. With built-in magnetic rods to transfer particles through the entire process of purification starting from binding, mixing and washing to elution, it reduces manual intervention to a bare minimum. This hassle-free extraction system helps one to obtain fine quality ultra-pure DNA and RNA that can be directly used for further downstream processing. Features 1. Large 7” touch screen for ease of operation 2. Quick extraction protocols, 13-40 minutes / cycle depending on the sample type and method 3. Pre-installed programs for effortless extraction of nucleic acid 4. In-built sterilization with UV lamp to avoid contamination 5. Compact and closed design to prevent any possible injuries 6. Capable of processing up to 32 samples per run with initial sample volume up to 400μl. Weight - 51KGDimensions - 67cmL x 53cmW x 70cmH

The HI98192 instrument is state-of-the-art, heavy-duty conductivity meter, designed to provide labor (more)atory results and accuracy under harsh industrial conditions. The USP standard compliance makes the instrument useful for pure water determination. It is provided with a series of new diagnostic features which add an entirely new dimension to the measurement of conductivity, by allowing the user to dramatically improve the reliability of the measurement: • 7 memorized standards (0.00 μS/cm, 84.0 μS/cm, 1.413 mS/cm, 5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm and 111.8 mS/cm) for calibration. • EC calibration up to five calibration points. • Messages on the graphic LCD for an easy and accurate calibration. • Diagnostic features to alert the user when the electrode needs cleaning. • User-selectable “Outside Calibration Range” warning. • User-selectable “calibration time out” to remind when a new calibration is necessary. Moreover, they offer an extended temperature range from -20.0 to 120.0 °C (-4.0 to 248.0 °F), using temperature sensor inside EC electrode. This instrument can also measure in Resistivity, TDS and Salinity ranges. Three salinity modes are available: % NaCl, Practical salinity and Natural seawater scale. Other features include: • Temperature source selection • Temperature automatic compensation, linear or non linear user selectable • Temperature reference selection 15 °C, 20 °C or 25 °C. • Temperature coefficient set • Log on demand up to 400 samples • Auto Log feature up to 1000 records • Auto Hold feature, to freeze first stable reading on the LCD • Lock and user setup Fixed range selection • GLP feature, to view last calibration data for EC, NaCl • Probe change recognition • PC interface • Probe replatinizationWeight 2.9KG Dimensions - 43cmL x 30cmW x 9cmH

This listing is for a Labcold RSBT1056MD Blood Bank RefrigeratorLabcold Keypad Electronic lockStainl (more)ess steelLabcold Alarm and Control SystemAdjustable shelvesDual temperature display with load simulatorBlood audit interfaceCore temperature alarmRegistered medical Device in accordance with UK MDR 2002, and is compliant with BS4376: Part 1:1991This cabinet has a top mounted instrument panel, for convenience and ease of use.Adjustable shelves with clear inner doors ensure stable storage temperatures during door openings, whilst allowing rapid checking of stocks.All have the unique Labcold Keypad Electronic Lock, which allows only authorised persons to access the contents by entering 4-digit code.LABCOLD’S UNIQUE ALARM AND CONTROL SYSTEM provides a constant check of all important performance parameters with clear symbol displays of alarm status.A touch panel display constantly shows both chamber and liquid load simulator temperatures.A mutable, audible alarm is standard and remote alarm contacts are provided to integrate with compatible external systems.ConfigurationFree StandingCapacity (Litres)118Capacity (Bags)56Height x Width x Depth1045mm x 655mm x 670mmWeight77kgShelves2Temperature Range+2ºC to +8ºCDoor TypeSolidLock TypeDigital

This listing is for a Medite A550 Rotary MicrotomeDeveloped and manufactured by experts in GermanyTh (more)e fully automatic Microtome A550 is the premium model for use in histology and histopathology as well as in research laboratories and in industrial quality assurance. With this microtome version, both the horizontal feed and retraction and the vertical cutting stroke are motorized. This means physical relief for the user during intensive, long-term use. Alternatively, the cutting stroke can also be carried out manually using the smooth-running handwheel, if, for example, sensitive cuts are necessary for very fragile tissue samples. The handwheel can easily be locked in any position using a spring lever. The proven, high-precision microtome mechanism is developed and produced in Germany and ensures maximum sectioning quality for continuously high sample throughput.The Microtome A550 impresses with its high functionality and attractive design that are focused on optimal ease of use. Settings relevant to the sections are entered via the intuitively operated membrane keyboard with digital display. The background color is freely selectable.The upper rotary push button on the left is used to switch between fine and coarse adjustment and to scroll through the menu. With the middle, larger rotary push button, the specimen clamp is simply moved back and forth. This can also be done using the keyboard. The sectioning speed can be set with the lower rotary push button and two different speeds can be selected for trimming and fine sectioning.

This listing is for a Pall Europe Allegro Tangetial Flow Filtration

This listing is for a Hettich EBA 20 CentrifugeEBA 20 and EBA 20 S are compact and practical centrif (more)uges for small sample volumes. They are fitted as standard with an angle rotor for 8 tubes up to a volume of 15 ml. The EBA 20 attains a max. RCF of 3,461 and is the ideal choice for a medical practice.

This listing is for a Prestige Medical Classic AutoclaveAutoclave specially designed to sterilise un (more)wrapped solid instruments. It has a practical basket to sterilise different instruments.

This listing is for a Buchi Rotavapor R-100 Rotary Evaporator SystemMeet the essential needs of clas (more)sical laboratory applications with this rotary evaporator. BUCHI Rotavapor R-100 Rotary Evaporator Systems are bundled with the Vacuum Pump V-100, regulated by the Interface I-100 and include the Recirculating Chiller F-100.Specifications:Depth (Metric) - 502 mm Rotavapor, 326 mm BathHeight (Metric) - 898 mm Rotavapor, 219 mm BathWidth (Metric) - 617 mm Rotavapor, 285 mm BathSpeed - 20 to 280 rpmDisplay - DigitalCooling Surface - 500 cm2

This listing is for 1 of 2 Thermo Scientific KingFisher Flex DNA AnalyzersThe Thermo Scientific King (more)Fisher Flex is a versatile benchtop automated extraction instrument in the lab for 24 or 96 samples per run. It offers consistent medium- to high-throughput extraction and purification of DNA, RNA, proteins, and cells.

This listing is for an APC Pro 1200 UPSThe Back-UPS Pro provides abundant battery backup power, so y (more)ou can work through medium and extended length power outages. It safeguards your equipment against damaging surges and spikes that travel along utility and data lines. The Back-UPS Pro also features automatic voltage regulation (AVR), which instantly adjusts high and low voltages to safe levels, so you can work indefinitely during brownouts and overvoltages. The Back-UPS Pro also includes unique “green” features, like power-saving outlets that automatically turn off idle peripherals. A high efficiency charging system and “AVR Bypass” also reduce power consumption. With the rest of the Back-UPS Pro’s standard features, this is the perfect unit to protect your productivity from the constant threat of bad power and lost data.Specifications:Dimenions - 30,2 x 11,2 x 38,1 cmWeight - 12,8 kg

This listing is for a Brand New Harvest Right Medium Pharmaceutical PRO Freeze Dryer sold through UL (more)Mfreezedryers.comWe are stock holders in UKPrice Before VAT - £4500Both long term and short term rental available.Weekly £500+ transportMonthly £1500 + transportHarvest Right’s Pro Pharmaceutical Freeze Dryer removes water from plants and organic compounds while they are in a frozen state. This locks in the freshness of herbs and plants. Their appearance, nutritional content, and potency remain the same as when they were fresh.Freeze drying completely removes water in about 24 hours. No other preservation method comes close to removing water this quickly. This is important because the longer a harvested plant or compound retains water, the greater the chance it has of spoiling and losing nutrition and potency.What’s IncludedMedium Pharma Freeze DryerPremier Vacuum PumpVacuum Pump OilOil FilterStainless Steel Trays (set of 7)Guide to Freeze DryingKey Features & Benefits- The freeze dryer has built in intelligence. It automaticallyand perfectly manages the freeze drying process- The ideal vacuum pressure and drying temperature is maintainedfor each material – preserves freshness and potency- 6.5 square feet of tray space- Shelving unit holds 7 trays (each tray 190.5mm W x 457.2mm L x19mmH)- 4 liters of ice capacity Warranty1 Year international warranty provided by Harvest Right. DimensionsOverall product dimensions: 660mm W x 540mm D x 724mm HPerfect for a counter top, cart or table. Weight 58Kg PowerStandard UK 230v Shipping Info- The medium pharmaceutical freeze dryer ships in one packagewith a total weight of 160KG- Item will be delivered in international shipping crate (mustbe purchased from Harvest Right when exporting machines out of USA)- One freeze dryer in fully encased shipping crate: 920 x 770 x1500H - If you would like to collect from site, we would be able tocut down the crate to fit in smaller vans: 920 x 770 x 1050H + extra box ofparts MaintenanceSimply filter and replace oil. Takes one or two minutes. Industrial Grade DesignHigh quality, super high vacuumHigh evacuation performanceLight, fast, energy efficient Technical SpecificationsOil: Harvest Right Oil, Robinair Premium High Vacuum Pump Oil orJB Industries Black Gold Vacuum Pump Oil OnlyDC MotorEnergy EfficientVoltage: Standard, 230vDimensions: 410mm W x 152mm D x 307mm HWeight: 6.57KGNoise: 52 decibels Product ComparisonIndustrial Oil Pump vs Standard Oil Pump Oil ChangesThis new Industrial Pump rarely needs to have the oil changed orfiltered. The pump has a gas ballast feature that makes it so water does notstay in the oil. Because of this, the oil in the pump will be pristine andclear, even after 30 or more batches. You simply won’t need to change the oiluntil you have run 25 to 40 batches. Whereas, the oil in the standard vacuumpump needs to be changed and filtered every 4 or 5 batches (when using the new3/8 inch vacuum hose). Vacuum PressureUnder cold and hot conditions the Industrial Pump will pull adeeper vacuum than the Standard Pump. Under cold conditions the difference is.05 Pascal for the Industrial Pump and .08 Pascal for the Standard Pump.Whereas, under warm conditions the difference is much greater: .05 Pascal forthe Industrial Pump and 2.05 Pascal for the Standard Pump. Hence, the Industrial Pump is especially not affected by warm,ambient conditions. When temperatures rise, it will pull a vacuum far betterthan the Standard Pump. The Industrial Pump is just not affected by outsideheat. It pulls the same deep vacuum even when it is in a warm environment. NoiseThe Industrial Pump is substantially quieter than the StandardPump, 52 decibels versus 64 decibels. The Industrial Pump at 52 decibels isabout the same as a refrigerator. Oil Mist FilterBoth pumps come with an oil mist filter. However, the IndustrialPump’s oil mist filter allows for no oil spray at all and it will last muchlonger. Power UseThe Industrial Pump uses less power than the Standard Pump (187watts versus 218 watts). AmperageUnder hot conditions at ultimate vacuum pressure the StandardPump pulls 2.1 amps while the Industrial Pump only pulls 1.7 amps. Hence, theIndustrial Pump is more efficient. WeightThe Industrial Pump is easier to move around as it weighs 2.2KGless than the Standard Pump (14.5KG versus 16.7KG.) is more durable and will last longer than the Standard Pump.

This listing is for a Labcold RSBG1030MD Blood Bank RefrigeratorLabcold RSBG1030MD Blood Bank Refrig (more)eratorThe RSBG1030MD Blood Bank refrigerator is the smallest in the Labcold range, this stainless steel lined blood bank is ideal for storing small quantities of red blood cells safely and securely.Adjustable shelves behind clear inner doors ensure stable storage temperatures during door openings, whilst allowing rapid checking of stocks through glass door. Supplied with a key pad lockable door.Although the most compact unit in the Labcold Blood Bank range, this model is a certified Medical Device in accordance with Directive 93/42/EEC and is compliant with BS4376: Part 1:1991.LABCOLD’S UNIQUE ALARM AND CONTROL SYSTEM is fitted providing a constant check of all important performance parameters with clear symbol displays of normal operation or alarm status.A touch panel display constantly shows both chamber and liquid load simulator temperatures. A mutable, audible alarm is standard and remote alarm contacts are provided to integrate with compatible external systems.Features:• Benchtop style.• Stainless steel interior.• 2 Adjustable shelves.• Labcold Alarm and Control System.• 7-day chart recorder.• Dual temperature display with load simulator.• Blood audit interface.• Core temperature action alarm.• Certified Medical Device in accordance with EU Directive 93/42/EEC and is compliant with BS4376: Part 1:1991.Specifications:• Operating temperaute: +4°C.• Capacity (ltr): 88ltr.• Capacity (250ml bags): 30 (approx).• Interior construction: Stainless steel.• Exterior construction: Powder coated steel.• Shelves: 2.• Weight: 42kg.

This listing is for 1 of 3 Roche LightCycler II Thermal Cycler

The Genlab range of Classic Incubators offers a selection of highly efficient, reliable and cost eff (more)ective units to suit most biological analysis, research and general laboratory applications.The simple thermostat system is easy to use and the units can be built up to meet individual requirements.Weight 29KGDimensions - 58cmL x 30cmW x 66cmH

This listing is for a Thermo Scientific Multiskan GO SpectrophotometerThe Multiskan GO is a micropla (more)te spectrophotometer that supports endpoint, kinetic and spectral scanning assays. It reads 96-and 384-well microplates with and without lids, and all major cuvette types. Additionally, it is compatible with the µDrop Plate that is designed for quick and easy measurement of low sample volumes down to 2 µL. The reading speed of Multiskan GO is exceptionally fast; all wells in a 96-well plate are measured in less than 6 seconds, and a full 384 well plate is measured in just 10 seconds. A broad wavelength range with the UV area, pathlength correction as well as fast spectral scanning makes it an ideal tool for any photometric research application, including DNA, RNA and protein analysis. Specifications include:Wavelength selection MonochromatorLight source Xenon flash lampWavelength range 200 -1000 nm with 1 nm stepsRead-out range Up to 4 AbsBandwidth < 2.5 nm

This listing is for a Sakura Tissue-Tek TEC 5 EME-2 Embedding Station

This listing is for a Envair Safety Cabinet

This listing is for a Buchi Rotavapor R-300 Rotary Evaporator SystemMeets the highest expectations i (more)n convenience and versatility in rotary evaporation applications. BUCHI Rotavapor R-300 Rotary Evaporators feature a modular design which facilitates extension into a fully integrated system.Specifications:Description - BUCHI Rotavapor R-300 Rotary Evaporator with Heating Bath B-305Weight (Metric) - 13.5 kg, 4.2 kg BathWidth (Metric) - 606 mm, 307 mm BathSpeed - 10 to 280 rpmFor Use With (Application) - General laboratory evaporationWattage - 100 w, 1500 w BathGlassware Assembly Type - VerticaIP Rating - IP 21Angle - 10 to 50°Frequency - 50/60 Hz

This listing is for an Eppendorf 5415D Centrifuge The Centrifuge 5415 D is a non-refrigerated bench (more)-top centrifuge and is used in research and routine laboratories in the biosciences, industry, clinics and chemistry.With their space-saving design and user-friendly operating concept, these centrifuges are ideal for everyday routine tasks.The basic functions can be selected using the "SHORT" key and the "TIME" and "SPEED" dial. The values appear in the display in digital form.Power supply: 230 V / 50 – 60 Hz 120 V / 50 – 60 Hz see identification plate Power requirement: 180 W Max. rotational speed: 13,200 rpm Max. centrifugal force: 16,110 rcf Max. load: 24 x 2.0 ml Safe-Lock Micro Test Tubes or 36 x 0.5 ml tubes Max. kinetic energy: 3,100 Nm Max. density of material to be centrifuged: 1.2 g/ml Ambient temperature: 2 °C – 35 °C Max. relative humidity: 75 % Dimensions: Height:230 mm Depth: 310 mm Width: 230 mm Weight (without rotor): 8.5 kg Acceleration time (230 V): < 13 sec. Deceleration time: < 11 sec. Acceleration time (100 / 120 V): < 15 sec. Deceleration time: < 13 sec.

This listing is for an Elga Medica 120 Water Purification SystemThe MEDICA Pro is specifically desig (more)ned to meet the water quality needs of high performance, high volume single or multiple clinical diagnostic analyzers. The system delivers 4 l/min CLSI CLRW water with productivity up to 120 l/h to meet the requirements of your analysis equipment.

This listing is for 1 of 2 Fisherbrand F2 Vortex Mixer

This listing for a 1 of 2 BD Max PCR MachineBD MAX System is intended for in vitro diagnostic (IVD)  (more)use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR.The BD MAX System is capable of:Independent nucleic acid extraction and purification with built in extractor.PCR amplification using thermal cycling across 24 lanesReal time detection of products of amplificationIdentification of each Sample Buffer tube by external barcode readerWork List verification by internal barcode readerFluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysisQualitative, quantitative and melt sample analysisFeatures:Integrated and fully-automated extraction and thermocycling stepsProcesses and analyzes up to 24 specimens per runOn-board lysis and extraction with pre-filled reagent stripsReal-time PCR with two 24-lane microfluidic PCR readersDedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715Consistent results through standardized workflow and protocolsRapidly expanding menu and open-system options to help address emerging testing needsLess than one minute of hands on time per sampleElectrical Requirements100 to 240 V, 50/60 Hz, 10 A, 300 VA MaxDimensions:Weight250 lb.Depth28.5 in.Height 37 in.Width 29.7 in.

This listing is for a Adam Equipment Nimbus BalanceInnovative design enables a compact footprint, so (more) it occupies minimal space but retains a high level of performance. The Nimbus base is formed from a single piece of extruded aluminum, a material that provides superior temperature regulation. The single-piece construction offers greater stability, producing highly repeatable results. The weighing sensor in the Nimbus is crafted from a single block, and contains fewer parts than a traditional force motor balance. This optimized internal mechanism is fabricated using hardened materials, helping the Nimbus tolerate rigorous laboratory use. Efficiency in the mechanics, plus improved processing power of the electronics, leads to excellent performance.Capacity - 120gReadability - 0.0001gRepeatability - 0.0001gLinearity - 0.0003gMin Weight USP - 0.01gPan size - 90mm øWeighing Units - ct, custom unit, dwt, g, GN, mg, N, oz, oztStabilisation Time - 4Interface - RS-232/USBCalibration - Internal automatic calibrationDisplay - Backlit LCD with 20mm high digitsOperating Temperature - 15° to 35°C / 59° to 95°F

This listing is for a MX-S Vortex Mixer

This listing is for a Polytron PT1300D HomogeniserHandheld, volume range 0,1 to 250 ml. For dispersi (more)ng, homogenising, extractions, cell disruption, mixing, emulsifying, suspending.Volume H₂O - 0,1 - 250 mlSpeed range - 7000 - 30000 min⁻¹Speed display - DigitalMotor rating - 100WDimensions (W×D×H) - 40×45×210 mm

This listing is for a Zeiss Axioscope Microscope

This listing is for 1 of 2 Roche LC Carousel Centrifuge The LC Carousel Centrifuge 2.0 is an easy-to (more)-use centrifuge with a specially designed rotor that can hold one LightCycler® 2.0 Sample Carousel (for 20 µl or 100 µl capillaries) of the LightCycler® 2.0 Instrument.Type: Bentchtop centrifugeDimensions: 285 mm (H) x 315 mm (W) x 380 mm (D) (12 in W x 15 in D x 11 in H)Weight: 20.6 kg (45.4 lbs) without rotorCapacity: LightCyler® 2.0 Sample Carousel (20 μl or 100 μl) with 1 to 32 LightCycler® CapillariesOperating Time: Fixed program approximately 30 secondsSpeed: Max. 735 x gPower Source: AC 115-230 V, 50/60 Hz