BD Phoenix M50 Automated Identification & Susceptibility Testing Instrument

A laboratory oven with forced ventilation and an exceptional quality/price ratio! 100% Made in Italy (more) and with all accessories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:    - External structure in steel painted with anti-acid epoxy powder    - Inner chamber in 18/8 stainless steel    - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-F 52 FALC Forced Ventilation

This product is a multifunctional Ozone Meter that detects Ozone O3,Temperature, and Humidity . It′s (more) scientific and professional devices which can real-time monitor Ozone O3 on LCD display screen. Display method: Large screen color LCD display Atmospheric pressure: 86Kpa – 106Kpa Product Size: 164 x 74 x 26 mm Product weight: 210 g Detection temperature: -10°C to 50°C; Relative humidity: 20% – 85% Storage temperature: -10°C to 60°C Concentration unit for O3: ppm Test range: 0~5ppm Power source: Lithium battery with 2000 mAh capacity; 5V DC power charging via micro USB port

The Ci3000+ Weather-Ometer with its advanced digital control systems, represent monumental achieveme (more)nts in applying digital and optical technologies in easy-to-use laboratory weathering instrument. The 3000 Series is approved by many OEMs in the textiles, paints & coatings and plastics industries as the exclusive platform to deliver accurate, reproducible and repeatable results for predicting service life. The 3000 Series has been certified CE, UL, CSA, ISO and EN compliant. 4500 W water-cooled xenon arc lamp Total exposure area of 2,188 cm2 TFT full color 12″ touch screen control panel display of all test parameters Direct setting and control of Black Panel Temperature, uninsulated (BPT) or insulated (BST) Direct setting and control of relative humidity Direct setting and control of specimen chamber air temperature Display of diagnostic messages 14 factory pre-programmed test methods Space for 12 custom programs, sub-cycle capability SmartDamper to reduce test variability in chamber temperature and humidity and compensates for changes in ambient lab conditions SmartLight Monitor verifies that correct light capsule is installed Chamber viewing window in door Meets CE, UL, ISO EN and CSA safety requirements Automatic test countdown based on time or radiant exposure VibraSonic Humidification System Calibrated xenon reference lamp Water purity indicator Standards: AATCC TM16-2004: Colorfastness to Light AATCC TM 16.3 (2014): Colorfastness to Light, Xenon-Arc AATCC TM169: Weather Resistance of Textiles: Xenon Lamp Exposure ASTM C1442: Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus ASTM D2565: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications ASTM D3424: Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter ASTM D4303: Standard Test Methods for Lightfastness of Pigments Used in Artist Paints ASTM D4355: Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water ASTM D4459: Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications ASTM D4798: Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method) ASTM D5071: Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus ASTM D6551: Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus ASTM D6695: Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings ASTM D7869: Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings ASTM D904: Standard Practice for Exposure of Adhesive Specimens to Artificial Light ASTM G151: Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources ASTM G155: Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials GME 60292: Designation of Colour Fastness and Resistance to Artificial Light IEC 60068-2-5: Environmental testing – Part 2-5: Tests – Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering ISO 105-B02: Textiles – Tests for colour fastness – Part B02: Colour fastness to artificial light: Xenon arc fading lamp test ISO 105-B04: Textiles – Tests for colour fastness – Part B04: Colour fastness to weathering: Xenon arc test ISO 105-B07: Textiles – Tests for Colour Fastness – Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration ISO 105-B10: Textiles – Tests for colour fastness – Part B10: Artificial weathering – Exposure to filtered xenon-arc radiation ISO 12040: Graphic technology – Prints and printing inks – Assessment of light fastness using filtered xenon arc light ISO 16474-1: Paints and varnishes – Methods of exposure to laboratory light sources – Part 1: General guidance ISO 16474-2: Paints and varnishes – Methods of exposure to laboratory light sources – Part 2: Xenon-arc lamps ISO 18909: Photography – Processed photographic colour films and paper prints – Methods for measuring image stability ISO 18930: Imaging materials – Pictorial colour reflection prints – Methods for evaluating image stability under outdoor conditions ISO 18937: Imaging materials – Photographic reflection prints – Methods for measuring indoor light stability ISO 3917: Road vehicles – Safety glazing materials – Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering ISO 4892-1: Plastics – Methods of exposure to laboratory light sources – Part 1: General guidance ISO 4892-2: Plastics – Methods of exposure to laboratory light sources – Part 2: Xenon-arc sources JASO M346: Light-exposure test method by xenon-arc lamp for automotive interior part MIL-STD 810F: Environmental engineering considerations and laboratory tests – Part 2: Laboratory test methods – 505.4: Solar radiation (Sunshine) Peugeot Citroen (PSA) D47 1431: Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures SAE J2412: Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus SAE J2527: Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus VDA 75202: Automotive interior materials – Colorfastness and ageing test against light at high temperatures: Xenon arc VW PV 1303: Non-metallic materials – Lightfastness test for interior parts VW PV 3929: Non-Metallic Materials – Weather Ageing in Dry, Hot Climate VW PV 3930: Non-Metallic Materials – Weathering in Moist, Hot Climate

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Output: Constant voltage, constant current with automatic crossover Voltage: 20 V to 3000 V, fully a (more)djustable in 1 V steps Current: 1 mA to 400 mA, fully adjustable in 1 mA steps Power: 1 W to 400 W, fully adjustable in 1 W steps Terminals: 4 pair recessed female banana jacks, floating in parallel Timer: 1 min to 99 h and 58 mins, or 99999 volt-hours No load detection: 200 µA at greater than 350 V Ripple: ±1% (at 3000 V and 400 W) Line regulation: ±1% (at 3000 V and 400 W) Load regulation: ±1% (at 3000 V for a 50% change in output load) Drift: ±0.5% (after 30 min warm up at 3000 V and 400 W) Voltage stability : ±1% (at 3000 V full scale) Current stability : ±1% (at 400 mA full scale) Power stability: ±1% (at 400 W full scale) Set point accuracy: ±1% (at 3000 V full scale) Dimensions (DxWxH): 290 x 280 x 110 mm Weight: 3.7 kg

Julabo LC4 temperature controller Working temperature range : -50 … +350°C Temperature stability : ± (more)0.05°C Dimensions : B170 x D170 x H160 mm Weight : 3kg

Capacity: 2x Tube strip 8x 0.2 mL Speed: 6000 rpm g-force: 2000 xg Dimensions (WxHxD): 153 x 102 x 1 (more)53 mm Weight: 0,9 kg