Hardy Tools OZ-520 Ozone Concentration Meter

S+B Drawer door cabinet low Ice blue 600

Chemagen Chemagic Separation Module I with Software & Accessories This was removed from a unive (more)rsity lab where it was surplus to requirements. Included in the system are; 1 x Chemagic Magnetic Separation Module I10 x Tube Racks :-7 hold 12 x 50ml tubes2 Hold 12 x 15ml tubes1 holds 12 x 0.5ml tubes 1 x Chemagen BiopolymerVulkan TechnicOrder no. 200 03 014The unit powers on but not tested further. 1 x Compaq PCModel - Presario S0000Chemagen/Chemagic Software MSM (Release 5.1.0.6) Installed 1 x DGM MonitorModel - L-1731W 1 x Compaq Keyboard 1 x IBM Mouse All PC equipment powers up and seems to be in full working order. Boxed Accessories:-178 x Genetix Lids (opened)100 x Sealed 96 well 2.2ml storage plates6 x Sealed Nunclon Surface plates10 x Rubber plates5 x 384 well plates (S300RXFL)9 x 96 well 0.1ml slots8 x 100mm Tissue Culture Dishes11 x Chemagen Tubes (PK-400500-036-080403)18 x Microcon YM-100 Regenerated Cellulose38 x 2ml vials17 Packs of MicroAmp Optical Caps (8 caps per strip, 12 strips per pack)25 x Thermo Scientific 0.2ml Skirtled 96 well PCR Plates57 x fisherbrand Dispenser Tips 12.5mlPromega SV96 Total RNA Isolation System2 x Denletstor Metal racks size 38.5 x 15.5cm, 160 squares 1.5 x 15cm each2 x Wash Buffer 6 Bottles (both full) Volume unknown.Promega Vac-Man Laboratory Vacuum Manifold

Eppendorf 1 x 50ml Adapters, Cat. # 022637681 Eppendorf 1 x 50ml Adapters, Cat. # 022637681 forA-4-4 (more)4 rotor for one tube 30 - 50 ml. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 1 x 50ml Adapters, Cat. # 022637681 are designed to be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 1 x 50ml Adapters, Cat. # 022637681 includes: - Full 6 Month Parts and Labor Warranty

Edwards T-Station 85H Wet Turbo Station - ISO63 200-240V Ultimate Pressure <5 x 10-9 mbar Inlet C (more)onnection DN 63 ISO-K Leak Tightness <1 x 10-6 mbar ls-1 Features - Single dedicated button to start/stop pumps; Easy to read accurate display - Base plate includes rubber feet and cut-outs in the sides for manual handling - The nEXT85 and nEXT300 turbomolecular pumps, XDD1 dry diaphragm pump and E2M1.5 backing pump are all user serviceable - Integrated air cooler acts to cool internal power supply and pump/controller for quiet operation avoiding multiple fans - All metal frame means rugged design that can take abuse without cracking or breaking - Inlet flange options - Available with either an NW40, ISO63 or CF63 inlet flange to suit your application nEXT T-StationThe Edwards turbomolecular pumping stations are a comprehensive range of products providing versatile vacuum solutions in many different applications. All our nEXT turbomolecular pumping stations are supplied fully assembled and ready to run straight out of the box with nEXT turbomolecular pumps and backing pumps that are user serviceable. There are 2 models in the turbomolecular pumping stations range the entry level T-Station 85 and the higher capacity T-Station 300.Both the T-Station 85 and the 300 come with an integrated Turbo and Active Gauge controller which enables single button start/stop of the system. With the ability to control one of our active gauges, vent valve control and delayed start of the turbomolecular pump to either time or pressure if a gauge is fitted, the T-Station 85 ideal for general laboratory needs and the T-Station 300 extending the performance envelope for the R&D sector.nEXT T-Station 85Our T-Station 85 is a low cost, compact turbomolecular pumping station that seamlessly combines an nEXT85H turbomolecular pump with either a dry diaphragm or oil sealed backing pump, and a simple controller, providing pumping speeds of 47 to 84 ls-1.INCLUDED: The Edwards T-Station 85H Wet Turbo Station - ISO63 200-240V includes: - Power Cord - One Year Manufacturer's Warranty

Boost-A- Break Break Tank & Pump Set with Type AB Air Gap BTAB 700. This item was removed from a (more) university where it was surplus to requirement. It is in good cosmetic condition and powers up, when powered up the fault light illuminates immediately, due to this we have listed this item as Spares/Repairs. Fitted with Calpeda MXH 203E Pump.

Hewlett Packard HP 6890 GC Gas Chromatograph & Agilent 6890 Series Injector This was removed fro (more)m a university lab where it was surplus to requirements. The unit has had the mains power board removed and is sold for spares/repairs. It is in reasonably good cosmetic condition but has some marks from use.

Ohaus Guardian 7000 e-G71HSRDM Hotplate Stirrer, 120V The Ohaus Guardian 7000 Hotplate Stirrers are  (more)designed with outstanding safety features and superior heating and mixing performance. The SmartHousing is chemical resistant with an innovative, easy-to-clean design that channels spills away from internal components and the angled glass control panel. The bright LCD display includes intuitive icons, temperature, speed and time settings - all designed to monitor performance from across the lab. Protect your lab with SmartPresence and SmartLink technologies. These exclusive features automatically shut off the heater if no one is detected after a user set “time out” period has passed. An industry-leading early detection system that uses two independent safety controls to continuously monitor the electronics and shut off heating before an overtemperature condition occurs. Precise stirring from 60 to 1600 RPM is made possible by the design of a powerful motor, strong magnet and software-controlled ramp rate, ensuring secure magnetic coupling for viscous applications. SmartHeat allows you to set the maximum temperature of the unit and SmartRate enables fast or slow temperature and speed ramp rates. The programming feature allows storage of 5 multi-step programs. INCLUDED: The Ohaus Guardian 7000 e-G71HSRDM Hotplate Stirrer, 120V includes: - Two Stir Bars (40 x 8mm and 28.6 x 8mm) - 8" Stainless Steel RTD Temperature Probe - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Boekel Scientific 115004 Block Heater w/Touch Screen, 4 Block, 115V The Programmable Heating Blocks  (more)are designed for precise controlling of sample temperatures. Heating Blocks, also known as dry bath incubators, use aluminum inserts to suit the use of many types of laboratory test tubes, plates, and containers. Boekel programmable heating blocks are designed to be used with standard aluminum dry blocks (nominally 3” deep x 3 ¾” wide x 2” high) of varying configurations for heating test tubes, microtubes, and other small vessels. The Programmable Heating Blocks use an advanced touch screen control system to create and store programs. Programs can have a maximum of five different temperature steps and there is a repeat function for thermal cycling procedures. An option external temperature probe is available for spot temperature checking and controlling the unit temperature. *Block sold separately* Features •Readily Recognizable Icons to Start, Stop and Pause Temperature Control on a Bright Color Touch Screen •Save up to 25 Programs for Rapid Sample Processing •One, Two, and Four Block Models to Fit Your Workflow •Slim Design to Conserve Bench Space •Optional External Temperature Probe •UL, CE, CSA approved Modern laboratories require modern equipment to reduce repetitious procedures and increase accuracy and throughput. The Boekel Scientific’s programmable heating blocks are designed to accommodate the most basic sample incubation procedures to multi-step heating processes and thermal cycling procedures. The slim One, Two and Four block design allows for more bench space and a configurable work flow. The optional external temperature probe is great for spot checking temperatures or controlling block temperature based on the actual sample temperature.Click Here to View Product Video INCLUDED: The Boekel Scientific 115004 Block Heater w/Touch Screen, 4 Block, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty