Hermle Z600-500-P 500ml, Centrifugal Basket, Perforated

Brandnew. Excellent condition - Excellent price. 12 months warranty. Delivery Scope: - 100x Base pla (more)tform - 100x Microscope slide - 100x Filter card 9,5 mm - 100x Filter card 12,5 mm - 100 x Insert - 100x 2.2ml PP tube with a lid Tested suspension types: - Natural biological fluids such as cerebrospinal fluid, body cavity fluids, synovial fluid, discharges, pus, etc. - Suspensions in isotonic smear solutions, tissue puncture specimen, expectorations, bronchial washings, etc. Features and benefits: - Obtaining of an equal cellular preparate and supernatant from the same sample of tested biological suspension. - Obtaining of specimen (cytospin) by way of filtering the supernatant onto a filtering paper. - Rapid placement of cells on a microscope slide by centrifugal metod with permeation of supernatant onto a filtering paper. - Possibility of supernatant recover on a microscope slide by automatic drain off into a test tube. - Prevention of aerosoling by securing fluid escape into the centrifugal chamber. - Avoidance of infections by application of single-use inserts.

This listing is for a Thermo Electron Corporation CR 4i Refrigerated CentrifugeSpecifications Capaci (more)ty:Swing-out rotor: (4 x 750 mL) 3000 mLFixed angle rotor: (8 x100 mL) 800 mLMaximum load: 3.6 kgSpeed range: 500 to 7800 rpmRCF range: 20 to 9900 x gTemperature range: -9°C to 40°CDimensions (H x W x D): 45 x 85 x 66 cm (16.5″ x 33.5″ x 26″)Weight: 106 kg (233 lbs)Electrical: 120V, 60 Hz

Eppendorf 022653008 Aerosol-Tight Rotor FA-45-24-11 with AT lid The Eppendorf 022653008 Aerosol-Tigh (more)t Rotor FA-45-24-11 with AT lid for 1.5/2 mL Tubes, 24-Place is for use with microcentrifuge models 5424. The rotor has a maximum rotational speed of 15,000 RPM and is used for centrifugation of standard application lab samples. The rotor has a 24-place tube array that holds 1.5 mL/2.0 mL tubes, and includes a certified aerosol-tight lid for working with hazardous samples. Both the rotor and lid are autoclavable at 121 degrees C for 20 minutes. This fixed-angle rotor is an accessory for use with Eppendorf centrifuge model 5424, which spins biological lab samples at high speeds to separate cellular material into component parts.

Labconco 7548700 PTFE-Coated Microcentrifuge Tube Rotor PTFE-Coated Aluminum Rotor for CentriVap mic (more)ro IR. Holds twelve 15 ml vials, 20 mm dia. x 70 mm tall. INCLUDED: The Labconco 7548700 PTFE-Coated Microcentrifuge Tube Rotor includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Labconco 342691001 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope- (more)Ready, Service Fixtures, and Vacu-Pass Portal, 115V, 60HzFeatures - Electronically Commutated Motor (ECM) & Constant Airflow Profile (CAP) airflow monitoring system - Intrinsically-safe negative pressure design - Air-Wave™ Entry System & Contain-Air™ Negative Pressure Channel - Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available - Interior-mounted, line-of-sight color LCD with MyLogic OS. Displays filter life, status messages for alarm conditions and alerts. 8 languages available - Glare-free LED lighting located outside the contaminated work area - Fully-closing, clear 1/4" tempered safety glass sash - Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots - Smart-Start™ System user-programmable start up & shut down, Night-Smart™ System reduces blower speed when sash is closed - Leak-tight stainless steel interior & powder-coated steel exterior - Removable towel catch located under work surface - Built-in timer and digital clock with code-activated electronic security lock - ADA-Compliant touchpad control on right side post - Removable, seamless type 304 stainless steel, dished work surface with lift out knobs - Nominal inflow velocity of 105 fpm (0.5 m/sec) and nominal downflow velocity of 55 fpm (0.3 m/sec) with approximately 70% air recirculation The Labconco 342691001 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures, and Vacu-Pass Portal, 115V, 60Hz provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. These biological safety cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. When canopy-connected, the biosafety cabinets may be used for applications involving minute quantities of volatile toxic chemicals and tracer amounts of radionuclides as an adjunct to microbiological research. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates. All models are NSF compliant. During operation, room air is drawn into the inlet grill. The air in the plenum beneath the work surface is a mixture of unfiltered room air and air that has just passed through the work area. This contaminated air is drawn by the blower through the back plenum of the cabinet, where approximately 70% of the air is recirculated through the supply HEPA filter and back over the work area. The balance of the contaminated air is discharged to the environment after passing through the exhaust HEPA filter. INCLUDED: The Labconco 342691001 6' Purifier Cell Logic+ Class II Type A2 Biosafety Cabinet with Temp-Zone, Scope-Ready, Service Fixtures, and Vacu-Pass Portal, 115V, 60Hz includes: - Drain Valve Assembly and Fasteners - Vacu-Pass Accessory Plug - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

IKA T 65 digital ULTRA-TURRAX Speed Range 1,000 to 9,500 RPM Viscosity max. 5,000 mPas Volume range  (more)(H2O) 2 - 50 l Features - Wide speed range from 1000 to 9500 rpm for high circumferential speeds with small rotor diameters - Digital speed display and electronic speed control for precise operation - Electronic overload protection ensures device safety - Easy exchange of dispersing elements via plug-in connectors - Optional stainless steel dispersing elements available for vacuum and pressure conditions - Stepless speed adjustment with a 7 segment LED speed display - Three rotor-stator configurations ensure versatility in applications Extremely powerful dispersing instrument for volumes from 2 - 50 l (H2O) for typical pilot plant stations with digital speed display. It offers a wide speed range from 1000 – 9,500 rpm that enables users to work at high circumferential speeds even with small rotor diameters. Three rotor-stator configurations guarantee a wide range of applications. Reproducible operations due to constant speed even with changes in viscosities.The device requires a 3-phase electricity supply in order to operate. The connection of the unit to the power supply must be done by a qualified electrician. Wiring diagrams are included in the manual for reference.INCLUDED: The IKA T 65 digital ULTRA-TURRAX includes: - T 65 digital ULTRA-TURRAX® - Rotor wrench - Hook wrench - Shaft wrench - Cable gland for switch cable (2 pcs.) - Hexagon L-wrench - 2 Year Manufacturer's Warranty

Heidolph 036300350 Overhead Stirrer Impeller, BR 12 Pivoting-Blade Especially when using narrow-neck (more)ed vessels, e.g. round-bottom flasks, a stirring tool with pivoting blades is used. Just like our pivoting-blade impeller BR 12. This blade impeller is ideal for dissolving and homogenizing in vessels with the following characteristics: ideal vessel diameter: 120 mm, ideal ground clearance: 6 mm, ideal filling level: 120 mm, and ideal volume: 1,400 ml. The pivoting-blade impeller BR 12 has a total length of 400 mm and is made of stainless steel. Its stirring shaft has a diameter of 8 mm. INCLUDED: The Heidolph 036300350 Overhead Stirrer Impeller, BR 12 Pivoting-Blade includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty