General laboratory equipment - other

Adattatore AC/DC per frigo - congelatori da trasporto Indel B IN:100-240V 50/60Hz OUT:12V 5A

Chromed iron grid shelf for 720 lt models

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOL (more)LOW

Calibrated gases: He, H2, N2, O2, CO2, Air, 5% Ar/CH4

The ChemiDoc System is based on CCD high-resolution, high-sensitivity detection technology and modul (more)ar options to accommodate a wide range of samples and support multiple detection methods including fluorescence, colorimetry, densitometry, chemiluminescence, and chemifluorescence. The system is controlled by Image Lab software to optimize imager performance for fast, integrated, and automated image capture and analysis of various samples. The system accommodates a wide array of samples, from large handcast polyacrylamide gels to small ReadyAgarose Gels and various blots. The system is an ideal accompaniment to PCR, purification, and electrophoresis systems, enabling image analysis and documentation of restriction digests, amplified nucleic acids, genetic fingerprinting, RFLPs, and protein purification and characterization. The ChemiDoc System offers fast and sensitive chemiluminescence detection in addition to gel and blot documentation of fluorescent and colorimetric samples. The system includes a supersensitive 16-bit CCD camera that is supercooled for detection of faint samples. The ChemiDoc XRS+ system can be used for imaging with a wide variety of applications that require high resolution and sensitivity (such as chemiluminescent western blots). The ChemiDoc System eliminates the need to use costly and unreliable X-ray film technologies while providing quantitative and reproducable data in seconds. The system features a signal accumulation mode (SAM), which guides a user through determining optimum exposure time and capturing a desired image of a chemiluminescent sample. Chemiluminescence: Yes Fluorescence: Yes Colorimetry/densitometry: Yes Gel documentation: Yes Maximum sample size: up to 28 x 36 cm Maximum image area: up to 26 x 35 cm Maximum image area: (For standard UV-excited gels) 25 x 26 cm Excitation source: Epi-white light and trans-UV (302 nm) plus white conversion screen Illumination control: 5 modes (trans-UV, epi-white, and no illumination for chemiluminescence), plus white conversion screen Detector: Supercooled CCD Pixel size (H x V): 6.45 x 6.45 µm Cooling system: Peltier Camera cooling temperature: -30°C controlled Filter selector: 3 positions (2 for filters, 1 without filter, for chemiluminescence) Emission filters: 1 included (standard), 3 optional Dynamic range: >4.0 orders of magnitude Pixel density (gray levels): 65,535 Dynamic flat fielding: Application specific, for all applications Instrument size (L x W x H): 36 x 60 x 96 cm Instrument weight: 32 kg Including Image Lab software

Connections: cold water, hot water, demineralized water

HEPA filtered horizontal laminar airflow (crossflow) creates an ISO Class 5 (14644-1) / GMP Class A  (more)(Annex 1) work area and prevents ambient air from entering the work area, ensuring product protection. Horizontal velocity: 0.45 m/s Light intensity: > 1000 Lux Pre-filter (ISO 16890 (former G3: EN779)): Coarsefilter Horizontal HEPA filter (EN 1822-1): H14 Dimensions (WxDxH): 1880 x 893 x 1153 mm Interior dimensions (WxDxH): 1859 x 570 x 736 mm Height support frame: 800 mm Weight: 190 kg

Dimensions (WxDxH): 1800 x 800 x 750 mm

The 2800 Dispensing System brings positive displacement technology to applications that require prec (more)ise metering of assembly fluids that change viscosity or where a specific flow rate is necessary. Unique patented technology within the system uses a flexible drive cable driven by a powerful stepper motor, to apply consistent dots or beads of virtually any assembly fluid. The heavy-duty motor is contained within the benchtop controller, keeping the handheld reservoir system lightweight and easy to use. For setup, the operator can use a menu-driven touch pad to set deposit volume (as small as 0.1 microliter), flow rate and other specific criteria. After initial setup, there is no need to recalibrate or reset the system due to changes in fluid viscosity or reservoir volume. Highly repeatable, precise fluid control No need to recalibrate during operation All electric; does not require shop air Programmable pullback eliminates drooling All digital, multi-function display with readouts of deposit volume, rate, shot count, and more 100 user-defined memory cells that store shot volume, syringe barrel size, pullback, dispense rate, and pause

Eddy Jet 2 reduces costs per test, hands on time, and consumable use during counts while increasing  (more)microbiology lab’s productivity. This cutting-edge spiral plater automates, standardizes and streamlines plate inoculations with its patented cross-contamination-free technology. Microsyringes give the system unique, unmatched advantages that make it a bestseller. The user interface is very intuitive and there are no setup times. Although Eddy Jet 2 is mostly used by food, cosmetic and pharmaceutical labs, any microbiology lab can greatly benefit from its use. This instrument will generate a threefold dilution concentration gradient on a single plate, allowing labs to skip serial dilutions and most platings. Each sample is processed with a brand new sterile microsyringe, making sample handling a cross-contamination-free process. Other than bacterial counts, antimicrobial susceptibility testing (AST) and mutagenicity test applications are also available. Reproduceerbaarheid: > 99% Tijd voor een volledige cyclus: 30 s (wegwerpspuiten maken desinfectie overbodig) Opgeslagen strooimodi: 25 strooimodi (37 inclusief die voor petriplaten van 150 mm) Bewegingsbesturing: 3 microcontroller-geregelde stappenmotoren Petriplaatdiameters: 90 en 150 mm Minimaal stapvolume: < 10 nl Maximaal gepipetteerd volume: 100 μl Materiaal spuit: polypropyleen Materiaal plunjer: polyethyleen H.D. Automatische controle: geprogrammeerd voor 6 regio’s Externe balansaansluiting: Serieel RS232 DB9 Printeraansluiting: Serieel RS232 DB9 Barcodescanneraansluiting: Specifieke aansluiting voor IUL-barcodescanner Aansluiting voor updates: Ethernet/USB-stick Extra aansluitingen voor randapparatuur: 4 x USB Host-poorten Afmetingen (BxHxD): 515 x 420 x 500 mm Gewicht: 20 kg

DNA/RNA UV-cleaner box UVC/T-M-AR is designed for clean operations with DNA samples. UV-cleaner box  (more)provide protection against contamination. Model is a bench-top type, made of metal framework, glass walls, working surface made of stainless steel. UV-cleaner boxes are equipped with an open UV lamp installed in the upper hood. UV-radiation from the open lamps disinfects the working area inactivating DNA/RNA fragments during 15–30 min of exposure. A digital timer controls duration of the direct UV irradiation. A daylight lamp provides proper illumination of the working surface. UV-cleaner boxes are equipped with a flow-type bactericidal UV cleaner–recirculator AR, which provides constant decontamination inside the box during operation. They are recommended for operations with DNA/RNA amplicons. UV cleaner–recirculator AR consists of a UV lamp, a fan and dust filters organized in a special body so that a user working with a UV-cleaner box is protected against UV light. Recirculator increases the maximum density of UV light making it  sufficiently effective for DNA/RNA inactivation. The UV–recirculator processes 100 UV-cleaner box volumes per hour, creating permanent aseptic conditions of operation inside the UV-cleaner box. Advantages of Biosan UV-cleaner boxes: Ozone free high density UV decontamination Long living UV lamps (9,000 hours average) Automatic switch off of UV-lamps when the protective screen is opened Bactericidal flow-type recirculator providing permanent decontamination inside UV –cleaner box during operation Shockproof glass walls Low noise, low energy consumption Walls material: Rear: stainless steel Sides and front: glass (EUROGLASS, Germany) Working surface material: Stainless steel Open UV-lamp: 1 x 25W built‑in bactericidal UV-C, TUV 25W 1SL/25 UV radiation level: 18 mW / cm2 / sec Radiation type: UV (λ = 253.7 nm), ozone-free Digital time setting of direct UV exposure: 1 min–24 hrs / non–stop (increment 1 min) UV-recirculator: 1x25W (efficiency >99% per 1 hour) Daylight lamp (for working area illumination): 1 x TLD-15W Thickness of side panels: 4 mm Thickness of upper front panel: 8 mm Thickness of screen: 4 mm Optical transmission: 95% UV protection: >96%, UV-protection film Working area: 645 × 490 mm Opening dimensions (fully raised protective screen): 645 × 190 mm Safety features: Automatic open UV-lamp switch off when screen is open Power outlets inside the unit: Inlet for power cords and 1x Built-in socket, max. 1000 W Overall dimensions (WxDxH): 700 x 580 x 555 mm Weight: 28.8 kg

The FP403 + FP404 model is an analyzer specially designed for in-line oxygen and CO2 measurements on (more) both horizontal and vertical flow packaging machines. Very easy to use and adapt to any mounting configuration.

Dimensions (WxDxH): 900 x 600 x 830 mm

Wall cabinet consisting of 4x sliding door and 1x double door cabinets Dimensions (WxDxH): 5560 x 73 (more)0 x 1280 mm

Meet your lab’s specific needs with outstanding flexibility and performance with the easy-to-use The (more)rmo Scientific MultiDrop Combi Reagent Dispenser, designed to support the varied requirements of pharmaceutical and biotechnology laboratories. It combines the most versatile features for reagent dispensing with excellent performance for drug discovery or genomic and proteomic assays. Dispensing volume: 0.5 to 2500µl Dimensions (WxDxH): 360 x 330 x 220 mm Weight: 9 kg

Dimensions (WxDxH): 600 x 470 x 600 mm

Air capacity: 800 m³/h Evaporation capacity: 60 L/24h Recommended room size: 900 m³, 360 m² Water re (more)servoir: 29 L Dimensions LxWxH): 316 x 625 x 720 mm Weight: 19 kg

Meet your lab’s specific needs with outstanding flexibility and performance with the easy-to-use The (more)rmo Scientific MultiDrop Combi Reagent Dispenser, designed to support the varied requirements of pharmaceutical and biotechnology laboratories. It combines the most versatile features for reagent dispensing with excellent performance for drug discovery or genomic and proteomic assays. Dispensing volume: 0.5 to 2500µl Dimensions (WxDxH): 360 x 330 x 220 mm Weight: 9 kg

Washing up to 95°C – antibacterical thermal disinfection Programs: 20 default + 20 custom Multi- lan (more)guage TFT colour touchscreen USB port for downloading washing cycles log 2 motors forced hot air drying system Peristaltic pump for liquid detergent Peristaltic pump for liquid neutralizer Possibility of installing up to 3 additional peristaltic pumps Washing chamber and internal door made of AISI 316L stainless steel All internal piping made of AISI 304 stainless steel External panels made of AISI 304 stainless steel Detergent cabinet made of AISI 304 stainless steel for 4×5 liters cans Washing up to 3 levels External dimensions (LxDxH): 900 x 800 x 1940 mm Internal working dimensions (LxDxH): 680 x 670 x 890 mm 2 independent washing pumps High efficiency drain pump Built-in boiler for fast cycles preheating water Cold water, hot water and demineralized water connections Double electronic door lock system for user safety Emergency opening system Electricalconnection: 3/N/PE400V-50Hz-18kWmax

System consists of: PAA KiNEDx arm Peak Analysis 1M linear rail Peak Analysis CS-10 carousel with st (more)acks 2 Microplate stackers Software As-is, no warranty

Set includes Rotovaper, waterbath and glass set, flask vol. 1000ml   Dimensions Rotovapor (h x d x w (more)): 640mm x 450mm x 375mm Dimensions Waterbath (h x d x w): 252mm x 328mm x 247mm Rotovapor: 230V – 50/60Hz – 45W Waterbath: 230V – 50/60Hz – 1000W

Robust and proven custom designed label printer in association with TCS print engines, the eGecko sy (more)stem is a completely integrated combined printer and application unit in one, with only the need for electrical supply. Utilising proprietary software, this software enables the creation of label position and the ability to run the eGecko automation simultaneously. Integrated with third party software, Bartender (seagullscientific.com) is used to direct drive data to printer. Control: Fully automated with own PC control Applications: Individual internal generation of labels Comms lead: 3m RS232 (3 wire 2,3 and 5 connection non twisted) + USB hub Dimensions (WxDxH): 489 x 395 x 626 mm As-is

Temperature range: RT +5 to 95°C and heat setting Capacity: 14 liters Dimensions bath (LxWxH): 350 x (more) 290 x 140 mm Basic temperature controller Stainless steel housing and interior Weight: approx. 15 kg

Increase your lab’s efficiency with the variable speed Thermo Scientific Tube Revolver / Rotator. A  (more)small footprint, flexible design and simple display help increase flexibility and effectiveness. Speed Range: 10 to 40 rpm Capacity combination of 4 paddles of: 7 x 10 to 15 mL tubes 7 x 5 to 7 mL tubes 15 x 1.5 to 2 mL tubes 21 x 0.5 to 0.8 mL tubes One paddle of 6 x 50 mL tubes Dimensions (LxWxH): 154 x 225 x 195 mm Weight: 1.2 kg Includes: Two 10/15 mL paddles Two 5/7 mL paddles Two 1.5/2 mL paddles Two 0.5/0.8 mL paddles One 50mL paddle Dimensions (HxDxW): 195 x 154 x 225 mm Weight: 1.2 kg

ASSIST offers unparalleled pipetting ergonomics. By attaching a VIAFLO electronic pipette to ASSIST, (more) the pipette’s protocols can be performed automatically. It reduces manual pipetting to the minimum, relieving lab personnel from repetitive motions that may cause repetitive stress injuries. Manual pipetting requires practice to achieve reproducible pipetting results. Typical parameters influencing the performance are tip immersion depth and pipetting angle. The automated pipetting capability of ASSIST ensures these parameters are always the same, resulting in an increased reproducibility. Channels: 8-, 12-, and 16- multichannel VIAFLO pipettes Volume: 0.5 µL to 1250 µL Applications: Serial dilutions, Plate filling, Reagent additions, Liquid handling, Automated multichannel pipetting Capacity: 6-well to 384-well plates Type: Air displacement Dimensions (WxDxH): 340 x 360 x 400 mm Weight: 10 kg

Eddy Jet 2 reduces costs per test, hands on time, and consumable use during counts while increasing  (more)microbiology lab’s productivity. This cutting-edge spiral plater automates, standardizes and streamlines plate inoculations with its patented cross-contamination-free technology. Microsyringes give the system unique, unmatched advantages that make it a bestseller. The user interface is very intuitive and there are no setup times. Although Eddy Jet 2 is mostly used by food, cosmetic and pharmaceutical labs, any microbiology lab can greatly benefit from its use. This instrument will generate a threefold dilution concentration gradient on a single plate, allowing labs to skip serial dilutions and most platings. Each sample is processed with a brand new sterile microsyringe, making sample handling a cross-contamination-free process. Other than bacterial counts, antimicrobial susceptibility testing (AST) and mutagenicity test applications are also available. Reproducibility: > 99% Time for a full cycle: 30 s (disposable syringes make disinfection unnecessary) Spreading modes stored: 25 spread modes (37 counting those for 150 mm Petri plates) Motion control: 3 Microcontroller-regulated stepper motors Petri plate diameters: 90 and 150 mm Minimum step volume: < 10 nl Maximum pipetted volume: 100 μl Syringe material: Polypropylene Plunger material: Polyethylene H.D. Auto checking: Programmed for 6 regions External balance connection: Serial RS232 DB9 Printer connection: Serial RS232 DB9 Barcode scanner connection: Specific connection for IUL barcode scanner Connection for updates: Ethernet/ USB pen drive Additional connections for peripherals: 2 x USB Host ports Dimensions (WxHxD): 515 x 420 x 500 mm Weight: 20 kg

Volume: 2 l Maximum Pressure: 16 bar Weight: 1.7 g Maximum Operating Temperature: +100°C Minimum Ope (more)rating Temperature: -10°C

Temperature range: Ambient +5°C to 99.9°C Content: 14 liters Dimensions (WxDxH): 450 x 485 x 240 mm  (more)Internal dimensions (WxDxH): 400 x 250 x 140 mm Weight: 12 kg