Belimed WD 170 Washer/Disinfector

Heidolph Hei-VAP Core HL/G3B Coated Hand Lift w/ G3 Vertical GlasswareThe Hei-VAP Series of rotary e (more)vaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. The PTFE vacuum seals are highly resistant and can achieve maximum tightness and reduce expensive spare parts. The 210℃ universal heating bath is suitable for all flasks up to 5 liters. Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm. Corrosion free die cast housing features condensation repellent varnish. The Heidolph Hei-VAP Core features an operating concept that is focused on the essentials: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Two separate knobs with dynamic control for setting the rotation speed and heating bath temperature: fast turning for large jumps, slow turning for precise setting of the set values. The Intuitive LED ring light system makes activated functions clearly visible even from a distance. Features: - Digital display - Direct access to rotation and heating bath temperature - Lock function - Standby button - Residual heat warning Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Core HL/G3B Coated Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3B Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Eppendorf 2 x 15ml Adapters, Cat. # 022639200 The Eppendorf 2 x 15ml Adapters, Cat. # 022639200 are  (more)for use with the Eppendorf A-4-38 Swing Bucket Rotor for the Eppendorf 5702/R Centrifuges. These adapters feature a capacity for 2 x 15ml conical bottom tubes each with the maximum tube dimensions (Diameter x Height) of 17.2mm x 121mm. This is a two piece set, and the adapters are new in packaging. INCLUDED: The Eppendorf 2 x 15ml Adapters, Cat. # 022639200 includes: - Set of 2 Adapters - Full 6 Month Parts and Labor Warranty Eppendorf 2 x 15ml Adapters, Cat. # 022639200 SpecificationsBottom ShapeConicalRotor CompatibilityEppendorf A-4-38 Swing Bucket Rotor

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The VELP RESPIROMETRIC BOD sensor is designed to provide a SMART solution to water and wastewater qu (more)ality control laboratories. This tool from Velp was designed to simplify the analysis process and make measurements as quick and easy as possible. - The bright 4-digit LED display provides long battery life compared to other sensors on the market. - Intuitive 2-button interface for easy analysis setup. - Pressure range: 500 ÷ 2000 mbar (hPa). - Results available in BOD (mg/l) and pressure (mbar). - BOD scales: 90, 250, 600, 1000, 4000, higher values ​​after dilution. - Automatic conversion of pressure results to BOD. Technical details: - Electronic pressure sensor. - Bottle volume: 500 ml. - Databox power supply: via USB connected to the PC. - Sampling interval: 30 minutes to 48 hours, depending on the duration of the test. - Data archive: on the sensor, RESPIROSoft™ database and Ermes Cloud. - Measurement period: From 1 to 730 days. Wireless control with DataBox™ and RESPIROSOFT™ software The proposed kit includes the wireless transmitter, for maximum comfort. The RESPIROMETRIC sensors transmit data directly to the PC allowing real-time monitoring of the analysis curve. Data management software is also included in the kit. The DataBox™ transmitter will be able to manage up to 400 RESPIROMETRIC sensors (66 systems). In short, the advantages: - Real-time analysis curve - More important information displayed at a glance - Sensor battery monitoring - Pre-installed methods - Test reports - Comparison of results - Simple and easy management Connect and monitor your sensors to the Ermes cloud wherever you are Improve the laboratory experience and prepare for the future, the connection to the VELP Ermes Cloud will improve the productivity and comfort of laboratory operators. - Real-time display of analyzes with simple and complete graphs, even from different PC, tablet and smartphone locations. - Real-time instrument status. - Advanced support for applications and services. - Access your analysis database anytime, anywhere, all you need is an internet connection. - Create and share analytics reports in multiple formats. - Instant event and alert notifications based on your settings (platform and email).

Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V Operating Temperature Range 100°C t (more)o 1150°C Max. Temperature Reaching Time ~70min. Internal Capacity 9L Features - Easy-to-use controller - Communication ports - High-temperature accuracy at ±2.0°C - Upgraded with long life R-thermocouple sensors - Excellent heat tightness with a firmly sealed chamber door - Program operation of a maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns, or 10 steps x 3 patterns - Self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker, and automatic overheat prevention device Standard 9L muffle furnace using microprocessor-controlled thermo-regulator characterized by excellent repeatability. Used for high temperature applications such as fusing glass, creating enamel coatings, ceramics and soldering and brazing metals. Easy to use controller. Excellent heat tightness with a firmly sealed chamber door. High temperature accuracy at ±2.0°C. Program operation of maximum of 6 patterns: 30 steps x 1 pattern, 15 steps x 2 patterns or 10 steps x 3 patterns. Safety features include self-diagnostic functions, calibration off-set, lock function, auto-recovery after power failure, earth leakage breaker and automatic overheat prevention device. Selectable options include exhaust system unit, N₂ gas loading device (with flow meter), temperature output terminal, time up/alarm output terminal and sample tray. Upgraded with long life R-thermocouple sensors. Designed with communication port. Temperature range: 100~1150°C. INCLUDED: The Yamato FO-410CR Muffle Furnace with Communication Port 9L, 220V includes: - Exhaust port cap 1 pc. - Power Cord - Operator's Manual - Manufacturer's Documentation - Year Manufacturer's Warranty

Labconco RapidVap N2 48-Place Block for 12 mm tubesFor use withRapidVap N2/48 Evaporation System. Bl (more)ock tube capacity: 48. Sample tube size:12 x 75 mm OD tubes, up to 6 ml. Sample volume: 4.5 ml. Actual sample volumedepends on tube shape, height and vortex speed.Blocks fitinside RapidVap Evaporation Systems. Glassware is required (not included). INCLUDED: The Labconco 7482100 RapidVap N2 48-Place Block for 12 mm tubes includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA RV 8 Rotary Evaporator w/ Coated Dry Ice Condenser Speed Range 5 to 300 RPM Temperature Range  (more)Ambient to 180°C Maximum Flask Size 4L Features - Manual lift with integrated safety “lift-out-function“ - New clamp mechanism - Water/oil heating bath with integrated ergonomic carryinghandles - Key-button with locking function for the heating bathtemperature - Speed range 5 - 300 rpm - Single-hand operation; ambidextrous design - Adjustable immersion angle - Additional user safety through reduced 24 V powerrequirements within the unit - Compatible with the complete range of IKA RV 10 glassware The IKA Rotary Evaporator range gets a new family member -the RV 8. This new distilling system completes the existing series by adding afunctional basic model. The manual lift, with ambidextrous design, allows forprecise positioning of the glassware. Digital displays for rotation speed andheating bath temperature allow for optimal control of all distilling processes.New clamp mechanism to simplify the changing of evaporation flasks. INCLUDED The IKA RV 8 Rotary Evaporator w/ Coated Dry Ice Condenser includes: - RV 8 S099 - HB digital S099 Heating Bath - RV 10.4 Dry Ice Condenser Coated Glassware - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty (+ Additional Free 3 Year Warranty Extension with IKA Registration) IKA RV 8 Rotary Evaporator w/ Coated Dry Ice Condenser SpecificationsType of coolingverticalCooling surface620 cm2Motor principleDCSpeed range5 - 300 rpmSpeed tolerance set rotation speed < 100rpm1 ±rpmSpeed tolerance set rotation speed 100rpm1 ±%LiftmanualStroke120 mmHeating temperature rangeroom temp. - 180 °CHeat output1400 WSet temperature resolution1 ±KFilling volume max.4 lDimensions (W x H x D)510 x 490 x 345 mmWeight25.76 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20Voltage100 - 240 V Frequency50/60 Hz Power input1500 W DC Voltage24 VComparison of ModelsSpecificationIKA RV 10 Digital Rotary Evaporator w/ Coated Dry Ice CondenserIKA RV 3 Rotary Evaporator w/ Coated Dry Ice CondenserIKA RV 8 Rotary Evaporator w/ Coated Dry Ice CondenserCooling Surface1500 cm²1500 cm²620 cm²Speed Range5 - 280 rpm20 - 300 rpm5 - 300 rpmLiftMotorManualManualStroke140 mm150 mm120 mmHeating Temperature RangeRoom Temp. - 180 °CRoom Temp. - 99 °CRoom Temp. - 180 °CHeat Output1300 WN/A1400 WFilling Volume Max.3 L4 L4 LTimerYesN/AN/ADimensions (W x H x D)500 x 430 x 440 mm440 x 530 x 330 mm510 x 490 x 345 mmVoltage220 - 240 / 115 / 100 - 240 / 100 - 120 / 100 - 115 V100 - 240 V100 - 240 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }Request a Formal Quote

The iBlot 2 Dry Blotting System was designed to deliver a high degree of convenience. The iBlot 2 Dr (more)y Blotting System is a true self-contained, plug-and-play system, with an integrated power supply, pre-packaged ready-to-use transfer stacks. Setup, teardown, and cleanup only takes minutes compared to the much more cumbersome and hands-on steps required for wet-tank transfer. The iBlot 2 Dry Blotting System has a simple touchscreen interface and pre-programmed optimized transfer programs, with the option to customize programs to suit your needs. In addition to ease of use and convenience, the iBlot 2 Dry Blotting System offers high-efficiency protein transfers for high downstream detection sensitivity—in many cases, higher than wet and semi-dry transfer methods. In the end, it helps you achieve more accurate detection using less sample. Transfer proteins in 7 minutes and move on quickly to the rest of your western blot processing. The iBlot 2 Dry Blotting System is designed to work with multiple polyacrylamide gel sizes, including the midi size (8 x 13 cm), E-PAGE 48 and 96 gels (13.5 x 10.8 cm), and mini gels (8 x 8 cm). The system is also compatible with all protein gel chemistries (tris-gylcine, bis-tris, tris-acetate, and tricine). Capacity: 1 – 2 mini, or 1 midi, or 1 E-PAGE gel Compatibility: 1.0 – 1.5 mm thick gels Transfer time: 6 – 10 min Transfer buffer: No buffer required Programs: Pre-programmed with six methods for transfer of proteins from various gel types or create custom programs Power supply: Internal (no additional power supply needed) Dimensions: 370 x 200 x 110 mm Weight: 2.3 kg