General laboratory equipment - other

Dimensions (WxDxH): 1500 x 800 x 710 mm

Dimensions (HxWxD): 2060 x 1400 x 620 mm

The ClonePix FL builds on the success of the Genetix white light ClonePix adding fluorescent imaging (more) capabilities for more intelligent selection. The unique proprietary technology behind ClonePix FL represents a major advance in cell line selection and development, significantly reducing the time and costs associated with new biopharmaceutical product development especially when compared to standard techniques such as limited dilution or cell sorting. Specification: White light imaging- Trans-illumination for imaging low contrast colonies such as adherent monolayers or small colonies in suspension. Epi-illumination for imaging colonies as they are collected Fluorescence imaging- Software-controlled switching between up to 5 excitation /emission filter pairs (we recommend no more than 3 filters be multiplexed for optimal performance) Data tracking- Internal barcode reader for source and destination plates enables data tracking for each run Camera- Integrated 16-bit cooled CCD camera Imaging speed- 6-well microplate: 5 min for 2 wavelengths (standard conditions) Resolution- Standard: 28 micron; Maximum: 1.5 micron Containment- Fully enclosed working environment with Class 100-type, HEPA filtration Source plate type- PetriWell-6 plate, PetriWell-1 plate, Greiner 6 well plate, Nunc 6 well plate, Nunc OmniTray Destination plate type- PetriWell-96 plate, Costar 96 well plate, Greiner 96 well plate, Nunc 96 well plate, Falcon 96 well plate Source plate capacity- 10 plates Destination plate capacity- 10 plates Picking head- 8 x picking pins – each pin independently controlled Picking pin size- Diameter of picking pins is application specific – F1: suspension cells, F2: adherent cells Picking speed > 200 clones per hour Wash bath- Ethanol wash bath, automatically refilled Picking system fluids- 5 L sterile water supply, 5L waste bottle Pin drying- Proprietary halogen pin drying station

Diagenode’s Bioruptor Pico uses a gentle method of sonication to retain the integrity of DNA and/or  (more)biological complexes, including chromatin, protein-protein binding, proteinDNA complexes and other biochemical and biological assay systems. The Bioruptor Pico sonication system uses a sonication bath to generate indirect sonication waves, which emanate from an ultrasound element below the water tank. Because the system is gentler than other sonicators, the Bioruptor Pico produces better and more consistent results than with harsher sonication methods. Up to 16 closed tubes can be sonicated in parallel and the continuous rotation of tubes allows even distribution of the energy for efficient sonication. The Bioruptor Pico enables automation of sonication, guaranteeing higher reproducibility of results. Ultrasonic wave frequency: 20 – 60 kHz Ultrasonic wave output power: 25 – 210 W Sonication unit dimensions (WxDH): 350 x 245 x 280 mm Sonication bath volume: 750 ml Timer: Digital Possibility to control water flow via connector kit for Bioruptor Cooler: Yes (included) Tube holder: Available for 0.1, 0.65, 1.5 or 15 ml tubes Total weight: 7,90 kg Number of samples to be processed simultaneously: 0.1 ml tubes – 12 samples 0.2 ml tubes – 16 samples 0.65 ml tubes – 12 samples 1.5 ml tubes – 6 samples 15 ml tubes – 6 samples

Series 3 digital force gauges are designed for tension and compression force testing in numerous app (more)lications from 0.5 N to 500 N. The gauges feature a sampling rate of 2,000 Hz, producing accurate results under a wide range of test conditions. A backlit graphic LCD displays large characters, and a menu is available to access the gauges’ features and configurable parameters. USB output is provided for data collection purposes. Set point indicators are provided for pass-fail testing. The gauges are overload protected to 200% of capacity, and an analog load bar is shown on the display for graphical representation of applied force. An ergonomic, reversible aluminum housing allows for hand held use or test stand mounting for more sophisticated testing requirements. Series 3 digital force gauges are directly compatible with Mark-10 test stands, grips, and software.

Dimensions (WxDxH): 1200 x 600 x 780 mm

Dimensions (H x W x D): 655 x 1250 x 500 mm

Capsule #2 (2 005) Fill and seal 100 capsules at a time The frame is molded from a steel / plastic a (more)lloy, which is very stable and can not rust

The G 7735 Washer/Disinfector is intended for cleaning and disinfection of dental and general medica (more)l instruments and accessories. It cleans and when using the disinfection cycles, simultaneously thermally disinfects at (93 °C) instruments and accessories. Areas of effectiveness are physical removal or thermal inactivation of vegetative bacteria including mycobacteria, fungi, fungal spores and viruses.These categories include the Mycobacterium tuberculosis and the Enterococcus faecium.

Dimensions (WxDxH): 2300 x 700 x 780 mm Weighing stone dimensions (WxD): 680 x 530 mm

QIAcube HT enables automated mid- to high-throughput nucleic acid purification in 96-well format usi (more)ng silica membrane technology. A variety of QIAcube HT Purification Kits lets users quickly and easily purify DNA, RNA and miRNA from almost any type of sample – including cells, tissues and stool samples, as well as from bacteria and viruses in animal samples. Automated protocols and dedicated accessories and consumables increase reliability and convenience and save valuable time. The system provides the same high-quality results as other trusted QIAGEN purification technologies. Reliable DNA, RNA and miRNA extraction from virtually any sample type Mid- to high-throughput solution with dedicated purification kits saves costs and time User-friendly software allows for easy data management and documentation Innovative design features increase safety and minimize cross-contamination Convenient, flexible and easy-to-use instrument with small footprint Accessories: Vacuum Control Station Precision: 20 – 200 µl, less than 4% coefficient of variation HEPA filter: Preinstalled dual-cartridge HEPA filter system provides positive pressure clean air within the closed hood. Communications: RS232 and USB Throughput: 24 – 96 samples in increments of 8 samples UV lamp: Preinstalled UV lamp for worktable decontamination Tip disposal: All used tips ejected externally; no waste accumulation on the worktable Software: Supplied with unlimited user license with free upgrades by web download Pipetting system: 8 pipetting channels, pipetting volume (20-200 µl) Notebook (supplied): QIAcube HT comes with a notebook computer for added flexibility. Table capacity: 4 x SBS positions (127.76 x 85.48 mm), compatible with 96-well plates or tip racks 1 custom adapter for a reagent trough plate compatible to accept reagent troughs vacuum chamber with chambers for waste and elution Dimensions (WxHxD): Instrument 540 x 450 x 630 mm, vacuum control station 495 x 520 x 400 mm Weight: QIAcube HT instrument 41 kg, vacuum control station 19 kg

96-well acrylic manifold for proteins and nucleic acids: Dot-, spot- and slot-blot array systems. Co (more)mpatible with multi channel pipettes Tension on the clamping is adjustable, permitting use of a variety of blotting and filtration media The Minifold system consists of four basic components: Sample well plate, filter support plate, vacuum plenum and metal clamping plate. 96-well spot-blot system: Standard microplate format. Sample volumes as low as 25 μl can be applied, with very high signal intensity.

Dimensions (WxDxH): 650 x 600 x 1121 mm Aperture (WxH): 550 x 300 mm Velocity: 0.55m/sec Noise Level (more): 52db(A) Filter: Large Capacity Carbon

Dimensions (WxDxH): 2020 x 750 x 950 mm

Weighing stone with Table Weighing stone 400×450 White 810x750x800

Dilution System for static dilution (1:100) of aerosols at static air flow rate (28,3 L/min) for mob (more)ile operation. The main application of the DIL 554 Aerosol Dilution System is in the verification of test aerosols for testing clean rooms. Purpose of conditioning: dilution of aerosols Sample condition, outlet: diluted aerosol Dilution factor: 100 Aerosol, volumetric flow rate: 28.3 L/min Setting method: manual Sample condition, inlet: non-diluted aerosol Power supply: 9 V battery block Hose connector: Ø 10 mm Pressure drop: approx. 0,6 kPa Environmental condition, temperature: 10 to 50°C Environmental condition, max. counterpressure: ± 30 kPa Dimensions (WxHxD): 120 x 195 x 300 mm Weight: 3,2 kg

Electrically height adjustable Dimensions (WxDxH): 2000 x 800 x 770 – 950 mm

Temperature Range: Ambient +5°C to 150°C Temperature Stability: ±0.05°C Temperature Accuracy: ±0.5°C (more) Capacity: 13 liters Flow Rate: 2-speed, 7 or 15 l/min Working Access (LxWxD): 133 x 216 x 197 mm Dimensions (LxWxH): 394 x 276 x 375 mm Weight: 14 kg

The Mini Trans-Blot cell provides rapid, high-quality blotting of Mini-PROTEAN handcast and precast  (more)gels. A component of the Mini-PROTEAN Tetra electrophoresis system, the Mini Trans-Blot cell accommodates two gel holder cassettes for electrophoretic transfer of mini format gels run in the Mini-PROTEAN Tetra cell. Features and Benefits: Transfer 2 10 x 7.5 cm gels in just 1 hr; low-intensity overnight transfers are also possible Wire electrodes placed 4 cm apart provide strong electrical fields and efficient protein transfer Color-coded cassettes and electrodes ensure proper orientation of the gel during transfer Included blue cooling unit is completely contained within the Mini Trans-Blot cell and absorbs heat generated during rapid transfers Applications and Uses: Western blotting Nucleic acid transfer

dimensions (hxwxd): 2×2,5×14 cm

50/60 Hz, 220-240V, 9.5 W No manual (as is).

220-240V

220-240V 50-60 Hz