Invitrogen XCell SureLock Electrophoresis Cell

The redesigned wide Mini-Sub Cell GT Electrophoresis Cell offers updated features that make electrop (more)horesis even easier. The wide Mini-Sub Cell GT Cell is suited for multiple-sample, rapid-screening applications. This popular system has a wide platform that can separate 30 samples per comb. The wide Mini-Sub Cell GT Cell is the same width as the Sub-Cell GT Cell, so the comb holder, combs, and 15 x 10 cm gel trays are interchangeable with the larger Sub-Cell GT units. All wide Mini-Sub Cell GT Systems accommodate ReadyAgarose Precast Gels to save time and allow highly reproducible separations. The cells include a buffer tank, a safety lid with cables, and a leveling bubble. Cell size (WxLxH): 178 x 255 x 68 mm Gel tray sizes (WxL): 150 x 70 mm ReadyAgarose gels accommodated: Yes, wide mini and 96 Plus formats Sample throughput: 10 – 60 Base buffer volume: ~650 ml Buffer recirculation: No Bromophenol blue migration: ~4.5 cm/hr (at 75 V)

System consists of: Bio-Rad Mini-Sub Cell GT Electrophoresis Cell Bio-Rad PowerPac HV High-Voltage P (more)ower Supply Mini-Sub Cell GT: Bio-Rad offers a range of mini horizontal electrophoresis chambers to resolve DNA fragments on either handcast agarose gels or ReadyAgarose precast gels. These cells include a buffer tank, safety lid with cables, and leveling bubble. Fast and flexible, the Mini-Sub cell GT cell is our most popular classroom gel box. The Mini-Sub cell GT cell holds either a 7 x 7 cm or a 7 x 10 cm gel tray. A 10 cm agarose gel poured with two 8-well combs easily accommodates two student teams at a time. At 100 V, this cell resolves DNA fragments from 20–20,000 base pairs in just under 30 min. Cell size (WxLxH): 120 x 260 x 65 mm Gel tray sizes (OD) (WxL): 70 x 70 mm ReadyAgarose gels accommodated: Yes, mini format Sample throughput: 8–30 Base buffer volume: ~270 ml Buffer recirculation: No Bromophenol blue migration: 4.5 cm/hr (at 75 V) PowerPac HV: Output (programmable): Voltage 20–5,000 V, Current 0.01–500 mA, Power 1–400 W Type of output: Constant voltage, constant current, constant power, or constant temperature (with automatic crossover) Timer control: 1 min–99 hr 59 min, fully adjustable Volt-hour control: Yes, 99,999 V-hr Pause/resume function: Yes Display functions: 128 x 64 pixel, yellow-green backlit graphics LCD Programmable methods: Stores up to 9 basic and 9 IEF methods, each with up to 9 steps Real-time editing: Yes Real-time clock: Yes Automatic recovery after power failure: Yes, user-selectable; setup values maintained Data transfer/archiving: Yes Temperature control: Yes, via temperature probe (not included); 30–90°C ±2°C Microampere readout and control: Yes Safety features: No-load detection, sudden load change detection, ground leak detection, overload/short circuit protection, overvoltage protection Number of output jacks: 4 sets in parallel Dimensions (WxLxH): 75 x 340 x 100 mm Weight: 2.85 kg

The power source of the brand Pharmacia type MultiDrive XL is designed for use in combination with e (more)lectrophoresis and isoelectric focusing (IEF). This power source can control and supply the three electrical parameters voltage, current and power. The duration of the run can be controlled by setting values for the following parameters: time, voltage and milliamperes per hour. In addition, the Pharmacia MultiDrive XL contains nine pre-programmed methods. Specifications Voltage: 3500V Current: 400mA Power: 150W Dimensions (WxDxH): 365 x 300 x 160 mm

This system is used to analyze the size of DNA/RNA samples, with convenientanalytical operability. I (more)t achieves analysis costs on par with agarose gel electrophoresis, and can perform fully automatic analyses of up to 108 samples. Using optimized reagent kits (four types for DNA analysis and one type for RNA analysis), the system achieves a high resolution and high sensitivity. It can significantly improve the workflow for mutation checks in genome editing, and genotype determination. Sample rack: Compatible with 96-well PCR plate and 12/8-strip PCR tube (Shimadzu recommended product) Microchip: Quartz, 23 mm separation channel length, on-chip electrodes (insert up to four microchips) Pretreatment: Automatic sample injection, automatic separation buffer replenishing, automatic chip cleaning Electrophoresis Voltage: Max. rated voltage: 1.5 kV, max. current: 250 μA Analysis Cycle time: Approx. 80 s (using four chips) DNA standard analysis (DNA-1000/premixed). This does not include time required for carrying out the first and final wash and initial analysis. Detection Method: LED-excited fluorescence detector (470 nm excitation wavelength) Separation Size Range: 25 to 500 bp (DNA-500 Kit), 100 to 1000 bp (DNA-1000 Kit), 100 to 2500 bp (DNA-2500 Kit), 100 to 12000 bp (DNA-12000 Kit), Up to 28S rRNA (5.0 knt) (RNA Kit) Resolution: 5 bp (25 to100 bp), 5% (100 to 500 bp), 10% (500 to 1000 bp), 20% (1000 to 12000 bp) Sizing Accuracy: ±5 bp (25 to 100 bp), ±5% (100 to 500 bp), ±15% (DNA-1000, DNA-2500, DNA-12000) Required Sample Volume: DNA analysis: Premix mode: 2 to 10 μL (after mixing with marker solution: 6 to 30 μL), On-Chip Mixing mode: 5 to 30 μL, RNA analysis: Premix mode: 3 to 15 μL (after mixing with marker solution: 6 to 30 μL), In the Premix mode, the marker solution is mixed with the sample before loading in the instrument, In the On-Chip Mixing mode, the sample and marker solution are loaded separately and mixed on the microchip under program control. Maximum Salt Concentration: DNA analysis: 10mM Tris-HCI containing 125 mM KCl or NaCl max, RNA analysis: 10mM Tris-HCI, containing 1 mM EDTA max. Min. Detection Limit: DNA analysis: 0.2 ng/μL (at 10mM Tris-HCI buffer, containing 50 mM KCl and 1.5 mM MgCl2), RNA analysis: 5 ng/μL (total RNA), 25 ng/μL (mRNA) (at 10 mM Tris-HCI buffer, containing 1mM EDTA) Quantitation Range: DNA analysis: 0.5 to 50 ng/μL (at 10mM Tris-HCI, containing 50 mM KCl and 1.5 mM MgCl2), RNA analysis: 25 to 500 ng/μL (total RNA), 25 to 250 ng/μL (mRNA) (10 mM Tris-HCI buffer, containing 1 mM EDTA) Quantitation Accuracy: DNA analysis: ±30% (at 10 mM Tris-HCI buffer, containing 50 mM KCL) (DNA-500, DNA-1000, and DNA-2500 Kits), ±40 % (DNA-12000 kit. Quantitative accuracy is based on verification from 200 bp to 12000 bp.) Quantitation Repeatability: RNA analysis: CV 10% or less (CV 20% or less for eukaryotic-origin total RNA at concentrations of 150 ng/μL or more) Dimensions (WxDxH): 415 x 545 x 508 mm Weight: 43 kg

Dimensions (H x W x D): 133 x 236 x 110 mm

Ohaus Endeavor 5000 Series e-E51LD0403 AM Light Duty Orbital Shaker Speed Range 100 to 800 RPM Maxim (more)um Capacity 8.8 lb. (4 kg) Orbit 3 mm Features - Compatible for use in incubators and cold rooms, enhancing versatility across experimental conditions - Features a triple eccentric drive and maintenance-free brushless DC motor for stable, long-term shaking - Bright, backlit LCD display with easy-to-navigate menu for speed, time settings, and advanced features - Integrated safety mechanisms with overload and unbalanced detection to protect samples - Equipped with RS232 interface for two-way communication, enabling data logging and unit control - Durable construction with chemical-resistant polymer housing and sturdy aluminum tray - Small footprint design with visual and audio alarms, and advanced microprocessor control for gradual speed increase to avoid splashing Click Here to View Product Video The Ohaus Endeavor 5000 Series Light Duty Orbital Shakers are a trusted choice for everyday laboratory shaking needs, designed to accommodate a wide range of applications from microbiology and molecular biology to food science and chemistry. These shakers come in three models, featuring either a 3 mm orbit, a 20 mm orbit, or a specialized microplate configuration, ensuring versatility for various research requirements. Each model is compatible with use in incubators and cold rooms, highlighting their adaptability to different experimental conditions. The shakers boast a durable, chemical-resistant polymer housing and a sturdy aluminum tray with multiple attachment points for accessories, making them both robust and easy to clean. A key feature of the Endeavor series is its triple eccentric drive and maintenance-free brushless DC motor, providing stable and accurate shaking over long periods. Safety is enhanced with integrated overload and unbalanced detection systems to protect valuable samples. The series is equipped with a bright, backlit LCD display that shows speed and time settings, including a timer with both count-up and count-down functions that automatically shuts off shaking when time expires. An easy-to-navigate menu and simple knob control facilitate operation, while the inclusion of a tray with a non-slip rubber mat, flask clamps, and tube racks enhances its utility. An RS232 interface allows for two-way communication for comprehensive data logging and control, ensuring these shakers meet the demands of modern laboratories. Additionally, design features such as visual and audio alarms, a small footprint to conserve bench space, and advanced microprocessor control for gradual speed ramping further underscore the thoughtful engineering behind the Ohaus Endeavor 5000 Series. Optional accessories like a universal platform and over 20 flask clamps and tube racks are available, making these shakers a versatile and essential tool for a variety of scientific studies. INCLUDED: The Ohaus Endeavor 5000 Series e-E51LD0403 AM Light Duty Orbital Shaker includes: - 11.75 x 8.75 in. Non-Skid Rubber Mat Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco FreeZone 6L -84C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collecto (more)rFeatures - Patented moisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. A variety of FreeZone Freeze Dryer accessories are available including Shell Freezers, Tray Dryers, Drying Chambers and Product Shelves. Memory to store30 programs with 16 segments each including number of steps,ramp rate, shelf temperature, hold time and vacuum level FreeZone 6 Liter Console Freeze Dryers with Stoppering TrayDryers are designed for lyophilizing moderate to large loads and stopperingvials or serum bottles under vacuum. The console features a front viewingwindow and interior space for a vacuum pump (sold separately). The console'supright stainless steel collector coil holds 6 liters of ice before defrosting.Two 1/3 hp HCFC/CFC-free refrigeration systems cool the collector to -84C(-119F), suitable for low eutectic point samples including acetonitrile. TheStoppering Tray Dryer features three 16.5" x 12" processing shelves.A single 1 hp HCFC/CFC-free refrigeration system and 1000-watt electric heatercool and heat the fluid medium circulating through channels in the shelves.Lyo-Works™ OS provides a real time display of freeze dryer and tray dryerparameters on a 5" full color, capacitive touch screen. Models with PTFE-coatedcollectors that can withstand corrosive compounds are available. Features Upright stainless steel collector coil holds 6L of ice before defrosting Environmentally-friendly HCFC/CFC-free refrigeration system cools the collector to -84C (-119°F) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection. The console provides interior space for vacuum pump (sold separately) Lyo-Works OS provides real time display of collector temperature and vacuum level Optional End-Zone™ end point detection for flask freeze drying One-touch data logging and display provides information to maximize sample quality and minimize run time FreeZone™ exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Three 16.5 x 12 in. temperature-controlled (±1C), adjustable shelves with sample temperature sensors provide up to 594 sq. inches of shelf space Circulating fluid in shelves ranges from -40 and +40C INCLUDED: The Labconco 710622000 FreeZone 6L -84C Console Freeze Dryer with Stoppering Tray Dryer and PTFE coil and collector 115V, 60Hz includes: - Vacuum Hose - Drain Hose - Hose Clamp x 2 - Baffle - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

ELD500 Max. Measurement <5x10-12 mbar ls-1 Inlet Connection NW25 Helium Pumping Speed 3.1 ls-1 Fe (more)atures - Color touch screen control with local graphical display and audible leak detection - Wireless models allow simultaneous control of up to 10 leak detectors - Low weight and integrated carry handles which allow it to be bench top or trolley mounted - Allows effective pump down of large of contaminate flows compatible with ELD500 and FLEX variants - Standard sniffer line enables operation up to 4m from the ELD500. Longer sniffer lines of up to 50m can be used with the sniffer extender interface - Ensured by class leading 180° mass spectrometer The ELD500 precision leak detector is designed for fast, accurate leak detection in a wide range of applications, fully mobile and with an easy to control interface. Featuring with low energy consumption, extended warranty and even longer life ion source, Edwards ELD500 leak detector ensures exceptional low cost of ownership with no compromise on performance.Available in three variants: ELD500, ELD500 FLEX, and ELD500 DRY, Edwards ELD500 leak detector is versatile. All models feature a rugged turbomolecular pump optimised for the rigours of portable leak detection, ideal across all applications.ELD500 WETThe ELD500 WET version uses a small rotary vane backing pump. This is the preferred choice when the unit is operated in an industrial environment and when fast pump down times of large chambers are required.INCLUDED: The Edwards ELD500 - 100-120V 60Hz US Helium Leak Detector includes: - Power Cord - One Year Manufacturer's Warranty

Temperature range: 0 – 8°C Dimensions (HxWxD): 845 x 500 x 540 mm Capacity: 112 L Weight: 25.4 kg