Radwag SA/APP/H Antivibration Table for Mass Comparators stainless steel

The antivibration table has been designed to eliminate floor vibrations during the operation of indu (more)strial scales. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a large stone top and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure and the tabletop are made of acid-resistant stainless steel.

The antivibration table has been designed to eliminate ground vibrations during the operation of aut (more)omatic feeder. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located on the left side of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure of the SAL/T version is made of powder-coated steel, and the top is made of HPL board.

The table has been designed to eliminate ground vibrations during the operation of laboratory equipm (more)ent such as microbalances, analytical balances and others. The working part consists of a table and a stone separated by a vibration damper. The table is equipped with adjustable feet with rubber tips, facilitating table levelling on uneven surfaces. Stability and vibration damping properties, resulting from the significant weight, are the main advantages of the table. The large surface of the tabletop makes it possible to place several balances on it. The structure of the table is made of powder-coated steel.

The antivibration table has been designed to eliminate floor vibrations during the operation of PLUS (more) series laboratory balances. It consists of two separate constructions: the outer, designed to isolate the working part, and the inner. The working part includes a table and a stone separated by a vibration damper. The table features a stone top (located at the centre of the table) and adjustable feet with protective rubber tips, facilitating table levelling on uneven surfaces. The structure and the tabletop are made of acid-resistant stainless steel.

This antivibration table is intended for mass comparators. It is made of powder-coated steel and a m (more)assive granite plate placed on top. The table has a safety feature to prevent accidental slipping of the stone, as well as vibration dampening rubbers. Due to low construction, the need to lift large masses to a considerable height is reduced.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

This listing is for 1 of 2 DiaMed 37 SI ID-IncubatorsThe ID incubator of the DiaMed type 37SI is ide (more)al for bringing different samples in ID cards to a temperature of 37 °C.

Labconco 16-Port Drying ChamberThe 16-PortDrying Chamber includes 3/4" thick acrylic lid with neopre (more)ne gasket, 16neoprene valves that accommodate both 1/2" and 3/4" adapters forconnection of flasks, and one latching pin. Made of type 304 stainless steel.It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers.DryingChambers provide a means to attach flasks to your freeze dryer or containsamples in bulk.INCLUDED: The Labconco 7522900 16-Port Drying Chamber includes: - Neoprene Valves x 16 (accomodates 1/2" & 3/4" adapters) - 3/4" Thick Acrylic Lid with Neoprene Gasket - Latching Pin - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Set includes Rotovaper, waterbath and glass set, flask vol. 1000ml   Dimensions Rotovapor (h x d x w (more)): 640mm x 450mm x 375mm Dimensions Waterbath (h x d x w): 252mm x 328mm x 247mm Rotovapor: 230V – 50/60Hz – 45W Waterbath: 230V – 50/60Hz – 1000W

miVac is a range of centrifugal concentrators capable of removing water and organic solvents from a  (more)variety of sample formats including tubes, microplates and vials. miVac systems are suitable for use with a wide range of solvents, from volatile organic types through to water and many medium boiling point solvents. The system is very simple to use, allowing samples to be safely concentrated or taken to complete dryness. The large clear display enables easy monitoring of time and temperature. The intuitive controls allow inexperienced users to get first-class results, while allowing more sophisticated programming for experienced workers. The simple, robust design ensures years of reliable service even when used intensively, such as in teaching or multi-user laboratories. To improve performance there are built-in special modes for working with water and alcohols. Performance is further enhanced through the use of the miVac SpeedTrap refrigerated condenser. Simplified operation with optimized programs for water, alcohol and other solvents Precise temperature control with timer and digital display up to a max of 60°C Various heating functions (preheating and heating of the interior) Plastic coated aluminum chamber and acrylic glass cover for better chemical resistance The rotors are easily interchangeable Compact systems are quiet when in use and up to 40% faster than comparable machines