ABI 7900HT Fast RT-PCR

The Applied Biosystems 7500 Fast Real-Time PCR System offers maximum performance in the minimum time (more) for labs running a variety of applications, including High Resolution Melting (HRM) analysis. Fully optimized for Fast cycling, the 7500 Fast System delivers high-quality results in as little as 30 minutes. The 7500 Fast System enables more runs per day with the excellent performance equivalent to that offered by the 7500 System. The Applied Biosystems 7500 Fast System is the original Fast solution including validated Fast reagents and over 700,000 TaqMan Gene Expression Assays. Specially designed Fast block ensures thermal uniformity at top speeds TaqMan Fast Universal PCR Master Mix and Fast SYBR Green Master Mix enable-rapid results with excellent assay performance equivalent to that of standard real-time PCR Fast optical plates ensure excellent precision in 5 – 30 μL reaction volumes Fast ramp rates enable rapid results without compromising extension times or assay quality

Applied Biosystems 7500 Fast Real Time PCR System This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and has passed all hardware testes. The lamp is showing 2029 hours. It is communicating with the Windows 7 PC which has ABI Life v2.3 installed. It is in excellent cosmetic condition with minor marks from use. With it are; 1x Dell PC:Model Optiplex 7010 1x Iiyama Prolite MonitorModel B2282HS21.5 inch screen 1x Dell Keyboard:The unit is in good working and cosmetic condition. 1x Dell Mouse:The unit is in good working and cosmetic condition. Connecting cables.

Scilogex TC1000-S Thermal CyclerThe Scilogex TC1000-S Thermal Cycler delivers high performance, high (more) throughput with easy programming via the color LCD touch screen display. Excellent temperature uniformity and high speed ramping rates with outstanding heat conductivity. Ideal for 96 x 0.2mL PCR tubes or 96-well plates. INCLUDED: The Scilogex TC1000-S Thermal Cycler includes: - 96 Well Block - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA DB 1.1 PCR Tube Dry Block

Capacity: 30 g/ 60 g/ 110 g/ 160 g Readability: 1 mg/ 2 mg/ 5 mg/ 10 mg Reproducibility: ±1 mg/ ±2 m (more)g/ ±5 mg/ ±10 mg Linearity: ±1 mg/ ±2 mg/ ±5 mg/ ±10 mg Response time: 2 sec Weighing plate: Ø 80 mm Weighing chamber height: 200 mm Weight: 5.5 kg

Scientific Industries MegaMag Genie LR Low Speed High volume magnetic stirrer designed for large cap (more)acity applications. Powerful magnet and motor offer exceptional magnetic force capable of stirring up to 38L. Digitally ajdust speed and time. Gentle ramp up avoids spills.Scientific Industries MegaMag Genie LR SpecificationsSpeed (RPM)50-300Maximum Stirring Positions1Stir Bar Maximum Length7.6 cm (3in)Top Surface Dimensions (D x W x H)305 x 305mm (12 x 12in)Timer1-99 minutes or continuousProduct Weight3 Kg (6.6 lb)Overall (D x W x H)310 x 305 x 130mm (12.25 x 12 x 5.1in)Maximum Stirring Capacity38 LBody MaterialABS/PolycarbonateComparison of ModelsSpecificationScientific Industries SI-2236 MegaMag GenieScientific Industries SI-3236 Digital MegaMag GenieScientific Industries SI-3236L MegaMag Genie LRSpeed (RPM)250-1300 RPM250-1300 RPM50-300 RPMStir Bar Maximum Length (cm/in)7.6 cm (3in)7.6 cm (3in)7.6 cm (3in)Top Surface Dimensions (D x W x H)305 x 305mm (12 x 12in)305 x 305mm (12 x 12in)305 x 305mm (12 x 12in)Timer1-99 minutes or continuous1 second - 99 hours1-99 minutes or continuousOverall Dimensions (D x W x H)310 x 305 x 130mm (12.25 x 12 x 5.1in)310 x 305 x 130mm (12.25 x 12 x 5.1in)310 x 305 x 130mm (12.25 x 12 x 5.1in)Maximum Stirring Capacity (L)38 L38 L38 L.comparison-table tr td:nth-child(4) { background-color: #fffacd; }

Polyscience P35N5A101B IP-35 Immersion Probe Cooler, 1.75 Rigid Coil Probe, -35 to +40C, 120V, 60Hz3 (more)D Visualization of the Polyscience Immersion Probe CoolerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. .rendering-block:nth-child(2) { width: 292px;}PolyScience Low Temperature Coolers enhance and simplify low-temperature laboratory work, providing rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, vapor and solvent trapping, and impact testing. They’re also ideal for extending the temperature range of non-refrigerated circulators to below ambient and boosting the cooling capacity of refrigerated circulators. Enhance and simplify your low-temperature laboratory work with a PolyScience Low Temperature Cooler. Available in both immersion probe and flow-through styles, they provide rapid, low-cost cooling of liquids to temperatures as low as -100C. Typical applications include the cooling of exothermic reactions, freeze point determinations, freeze drying, impact testing, lyphilization, and vapor and solvent trapping. Features Continuous cooling to temperatures as low as -100C Designed to run at maximum cooling An economical alternative to dry ice or liquid nitrogen Excellent for trapping applications, freeze drying, and rapidly cooling small volumes of liquids INCLUDED: The Polyscience P35N5A101B IP-35 Immersion Probe Cooler, -35°C to 40°C, 1004W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Ohaus 30573847 ISTHBLHTSN Thermal Shaker, 120V Orbit 3mm Speed Range 300 to 3,000 RPM Heating Rate ( (more)/min) 5°C/min (/min) Features - Best in class temperature performance. Enhanced electronics and software allow for fast and accurate temperature control you can trust. - Intuitive touchscreen for simple operation and programming. - Set the functions and the comprehensive help screens in one of six languages to guide the user through the operation of the unit. - Easily create programs for repeat applications. Storage for five separate, 5-step programs. - The USB port allows the transfer of test data to a flash drive for data logging and program storage. OHAUS Thermal Shakers are designed for heating and cooling applications that require consistentand precise high-speed shaking with dependable temperature control from 17°C below ambient to100°C. Temperature can be user-calibrated when precision is required. Customize applications withinterchangeable blocks to accommodate tubes & microplates. Intuitive touchscreen allows the user toview all steps of the program while monitoring the progress. INCLUDED: The Ohaus 30573847 ISTHBLHTSN Thermal Shaker, 120V includes: - Screwdriver for Block Removal - Detachable 3-wire cord and plug - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco RapidVap N2/48 Evaporation System with RS-232 LinkRapidVapN2/48 Evaporation Systems use nit (more)rogen blow down, vortex motion and heat tospeed evaporation of up to 48 small samples or eight 450 milliliter samples atonce. A stream of nitrogen or dry gas is directed downward onto the surface ofthe sample. Nitrogen blow down reduces the partial pressure directly over theliquid to speed evaporation and help remove the solvent as it evaporates. TheseSystems may be used to prepare samples for applications such as drug developmentand metabolism, bioresearch, combinatorial chemistry, environmental testing,forensics and toxicology. There are eight clusters of six ports each. Nitrogen may be delivered to 2, 4,6 or 8 clusters at once so that nitrogen is conserved when a full load is notrequired. Microprocessor-controlled vortex motion increases surface area forfaster evaporation while continually mixing the sample to maximize recovery.Utilizing a dry block heating method, RapidVap N2/48 Systems provide a morereliable alternative to maintenance-intensive, contamination-prone water baths.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose (6 ft.) - Clamp - Manifold Guide x 3 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA Oven 125 Control Drying Oven Heat Output 1500 W Working Temperature room temp. +5 - 300 °C Ope (more)rating Area Inner chamber 550 x 525 x 450 mm Features - IKA Oven 125: High-performance drying cabinets for precise temperature tasks. - Rapid heating and precise control for reproducible results in labs and research. - 125 l interior with high-quality insulation reduces odours and operating costs. - Heats up to 300°C with enhanced security features for temperature monitoring. - Well-lit interior with up to 6 shelves, automatic fan-off when door opens. - Interface for extra sensor and USB for direct temperature regulation and data storage. - Two TFT displays for process parameters, with intuitive user interface for profiles. - Real-time clock for digital documentation and time-delayed start enhances operation. The models in the IKA Oven 125 dry series are powerfuldrying cabinets for temperature regulation, drying, ageing and heating tasks.Rapid heating and exact temperature regulation guarantee reproducible resultsin industrial laboratories, schools and universities, research, quality controlor science. Thanks to its high quality insulation, the device has a very largeinterior of 125 l in relation to its total volume. This structure also reducesodour emissions and operating costs and ensures excellent temperatureuniformity. The Oven 125 control dry recirculating air drying cabinet heats up to 300 °C.The additional temperature selection limited TWB (DIN 12880) meets the highestsecurity requirements. Furthermore, the temperature curve can be monitored duringtesting independently of the safety temperature. This means that your testmaterial is always protected. A well thought out interior The generously dimensioned interior of the Oven 125 control dry is comfortablyilluminated. A practical cable bushing at the rear of the device is provided asstandard for measurements in the oven or in the test material. The fan switchesoff automatically if the door is open. Up to 6 insertable shelves can beaccommodated in the interior made of stainless steel. Interfaces The Oven 125 control dry offers an interface for an additional sensor fordirect temperature regulation in the test material. Test parameters can bestored directly on a USB stick. Two displays All important process parameters are displayed clearly on two large TFTdisplays. The temperature profiles and individual user profiles can be enteredvia the intuitive user interface. The real-time clock enables convenientdigital documentation and a time-delayed start. Click Here to View Product Video INCLUDED: The IKA Oven 125 Control Drying Oven includes: - IKA Oven 125 control - dry - IO T 1.00 (2x) - Tilt protection (2x) - Screwdriver (for adjustment of temperature limit) - USB cable - Calibration certification - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Oven 125 Control Drying Oven Specifications Heat output1500 WWorking temperatureroom temp. +5 - 300 °CAdjustable safety circuit50 - 320 °CAdjustment and display resolution0.1 KTemperature stability (150°C, center, standard door)0.5 ±KTemperature displayyesTimeryesTimer displayLCD Time setting range1 - 142560 minNumber of trays max.6 Load for one tray max.30 kg Operating area inner chamber550 x 525 x 450 mmTotal volume inner chamber125 lAir outlet port diameter inside48 mmDimensions (W x H x D)700 x 825 x 650 mmWeight82 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 20RS 232 interfaceyesUSB interfaceyesVoltage220 - 240 / 115 / 100 VFrequency50/60 HzPower input1600 WPower input standby2 WComparison of ModelsSpecificationsIKA Oven 125 BasicIKA Oven 125 Basic w/ Glass DoorIKA Oven 125 ControlIKA Oven 125 Control w/ Glass DoorHeat Output1500 W1500 W1500 W1500 WWorking Temperature RangeRoom temp. +5 - 250 °CRoom temp. +5 - 250 °CRoom temp. +5 - 300 °CRoom temp. +5 - 300 °CTimer Display7 segment LED7 segment LEDLCDLCDTime Setting Range1 - 144000 min1 - 144000 min1 - 142560 min1 - 142560 minInner Chamber (WxDxH)550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mm550 x 525 x 450 mmTotal Volume Inner Chamber125 L125 L125 L125 LExternal Dimensions (WxHxD)700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mm700 x 825 x 650 mmRS 232 InterfaceNoNoYesYesUSB InterfaceYesYesYesYesVoltage220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V220 - 240 / 115 / 100 V.comparison-table tr td:nth-child(4) { background-color: #fffacd; }