Pharmacia Biotech Conductivity Meter

This listing is for a Jenway 3540 pH & Conductivity Meter. The unit is in full working condition an (more)d is ready for immidate realese. The Jenway 3540 is a combined pH and conductivity meter designed for use in laboratories where both parameters need to be measured. It offers a space-saving and flexible approach to measuring pH and conductivity. Key Features Simultaneous display of pH and conductivity: Two independent channels prevent interference between probes. Additional modes: Resistivity, salinity, TDS, and mV measurements are available. Data logger: Autosave and print options with storage of up to 500 readings (250 for each mode). Probes sold separately: Glass combination pH electrode, glass conductivity probe (K=1), and ATC probe are available. Specifications Ranges: Conductivity (0.01µS/cm to 1.999S/cm), pH (2 to 20.000), temperature (10.0 to 105.0°C or 14 to 221°F), and salinity (0 to 99.9ppm). Input impedance: Greater than 1012 ohms. Temperature compensation: Manual or automatic, with a range of 0 to 100°C. Dimensions: 210 x 250 x 55 mm (L x W x H).

Double measurements everywhere. Designed so that the single press of a button triggers a calibration (more), measurement or review of the stored data. Intelligent Sensor Management (ISM®) ISM® leaves nothing to chance! Calibration data and history are stored in the sensor and automatically transferred upon connection to the instrument. ISM® meter and sensors - a great match The electrode kit contains the instrument and two ISM® sensors. You can benefit from its free features immediately! Specifications - SevenGo Duo pH / Cond meter SG23-EL-Kit Parameter: pH; Conductivity; ORP Channel: Double channel Version kit: Ready-to-use measuring kit Sensor: InLab Expert Go-ISM; InLab 738-ISM PH measuring range: 0 - 14 PH resolution: 0.01 Accuracy pH (±): 0.01 Measurement range (2): 0.1µS / cm - 500mS / cm Conductivity resolution: 0.01 ... 1 Conductivity accuracy (±): 0.5% Measurement range mV 0 Resolution mV: 1 Accuracy mV (±) 1 Temperature range (2): -5 ° C...105°C Temperature resolution: 0.1°C Temperature accuracy (±) pH: ± 0.5 / Cond: ± 0.2 Portable: Yes Compatible with Intelligent sensor management (ISM): Yes Memory capacity: 99 measurements Degree of protection: Watertight and dustproof (IP67) Languages  English Memory size  99 measurements Meter Type  Portable Dual-Channel mV measuring range  -1999..1999 mV

Conductivity meter pocket Eutech WPLOW-10. Measurement range of 0 to 1990 µS/cm, Waterproof. Resolut (more)ion 10 µS/cm and cell/CAT. Includes box and instruction manual. Specifications: Accuracy: +- 1% Full scale Calibration standard Range: 200 to 1990 µS/cm Calibration: 1 point ATC: 0 to 50 ° C Temperature coefficient: 2% per ° C Normalization Temperature: 25 ° C Auto off: 8,5 mins. after last keypress Operating temperature: 0 to 50 ° C Power battery: 4X 1.5 V LCD display (21x27 mm) Dimensions (WxD cm): 3,8x16,5 Weight: 90 gr

Sensitivity range: 1 µS/cm – 999.9 mS/cm Noise: ±0.5% full scale calibrated range Internal volume: 1 (more)4 µL Flow rate range: 0-100 mL/min Maximum operating pressure: 50 bar Dimensions (WxDxH): 245 x 150 x 100 mm

As-is No warranty

You can start a measurement or calibration with just one push of a button. The menu settings are int (more)uitive and consist of complete sentences in 12 languages. Read all relevant data at a glance, thanks to the 4.3″ color display with large numbers and clear icons. Increase the productivity of your instrument by connecting peripherals such as a printer, PC, USB stick and barcode reader. Parameter: Conductivity Channel: Single Channel Conductivity measurement range: 0.001 μS/cm to 1000 mS/cm Conductivity resolution: 0.001 to 1 Conductivity accuracy: ±0.5% Ease of Use: Multilingual Menu, Calibration Support Security & Compliance: Password Protection, GLP, User Management Memory size: 1,000 measurements Data transfer: PC, Printer, USB stick Flexibility and modularity: Stirrer, Barcode Scanner Protection class: Waterproof and dustproof (IP54) Compatible with Intelligent Sensor Management (ISM): Yes

Applied Thermal Control K4 K410000W Industrial Recirculating Chiller This item was removed from a un (more)iversity where it was surplus to requirement. It is in very good cosmetic condition and powers up. The previous owner has reported that the recycling water has been contaminated with coolant. It is sold for spares/repairs Product Details: Part K6NS227Serial No. 1200193 phase power supply 6kw cooling capacity2 separate circulating outputsTemp range 4 to 35˚C17L/min flow rate10 bar max

Yamato CA-301-115V Cold Trap 4L, 115V Refrigerant R404A Max Low Temperature -45°C Internal Capacity (more) Approx. 4 L Features - Excellent choice to extract acid and organic solvents with the optional glass condenser - Efficiently reduces vapor inhalation amount to the vacuum pump - Can be used as a low temperature tank as well as pre-cooling tank - Utilizes R404A and mixed coolants - Space saving and highly mobile on wheels 4L cold trap that efficiently traps water vapor and toxic substances discharged from vacuum oven and rotary evaporator to protect vacuum pump. Excellent choice to extract acid and organic solvents with the optional glass condenser. Efficiently reduces vapor inhalation amount to the vacuum pump. Can be used as a low temperature tank as well as pre-cooling tank. Utilizes R600a and mixed coolants. Space saving and highly mobile on wheels. Max. low temp -45°C. Dehumidifying capacity max 0.9 kg.INCLUDED: The Yamato CA-301-115V Cold Trap 4L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

PUE HX7 terminal is a constructional component of industrial multifunctional load cell scales, equip (more)ped with either one or numerous load cells. It is based on the latest solutions and an advanced computing platform. Versatile terminal’s software will satisfy even the most demanding users and system integrators. The basic version of the terminal features a vast range of communication interfaces, which range can additionally be expanded. Housing The housing, made of AISI 304 stainless steel, ensures high ingress protection, IP66 / IP68. The terminal is equipped with 7” colour LCD display and membrane keyboard. Ease of operation, clear menu and intuitive information arrangement on the display guarantee comfort of operation. Hermetic communication interface connectors are located on the back side of the housing. Stable mount bracket enables to mount the terminal either on a flat horizontal surface or on the wall. The device tilt can be easily adjusted. Weighing Platform Operation Basic version of the terminal supports 1 analog weighing platform. The possibility to install an additional weighing module enables to support 2 weighing platforms. Diodes Diode bar graph is located on the top of the operation panel and consists of 9 red and green diode fields. The terminal features 3 working modes: 'linear', 'weighing thresholds signalling' and 'checkweighing'. The bar graph significantly increases the comfort of operation during piecework in food industry when fast and unambiguous presentation of product mass deviation against the declared min and max values is crucial. Multifunctional Software Terminal software facilitates processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Terminal’s information system is based on databases (such as: users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. When developing the software, special attention was given to the functionality and ergonomics. This resulted in increased comfort of terminal operation. Optional Power Source from Internal Battery Use of the optional battery enables the PUE HX7 terminal to operate even when there is either no or unstable power supply. This improves the security of acquired data and improves comfort of operation. Communication Interfaces The terminal is equipped with RS 322, RS 485, USB, Ethernet, digital inputs/outputs and analog output. This enables connection with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. The connection is possible due to the implemented and complex character-based communication protocol. In the future, the interfaces will be extended with Profibus and Profinet. Additionally, Modbus RTU and TCP protocols will be implemented. PUE HX7 in a Version Powered from a ZR-03/2 Buffer Power Supply The terminal can operate even though there is no access to a power source in a special design with power supply from an external buffer power supply ZR-03. The special design consists in modifying the standard version of the PUE HX7 terminal to a variant of this terminal adapted for power supply from a buffer power supply ZR-03/2. The ZR-03/2 set includes a voltage converter and a powerbank. In a special design, the PUE HX7 weighing terminal has a 12-24V DC power socket to which the dedicated ZR-03/2 buffer power supply can be connected. The terminal can be powered only from the ZR-03/2 buffer power supply, not from the 110-230V AC mains or the internal battery. The powerbank can be charged using an external charger, after disconnection from the weighing terminal. The powerbank runs on one set of batteries while the other is charging. The maximum operating time for the HX7 terminal is 20 hours, and the average is 12 hours. The operating time depends on the number of connected peripherals and the power drawn from the terminal.

Ohaus Guardian 7000 e-G71HS10C Hotplate Stirrer, 120V The Ohaus Guardian 7000 Hotplate Stirrers are  (more)designed with outstanding safety features and superior heating and mixing performance. The SmartHousing is chemical resistant with an innovative, easy-to-clean design that channels spills away from internal components and the angled glass control panel. The bright LCD display includes intuitive icons, temperature, speed and time settings - all designed to monitor performance from across the lab. Protect your lab with SmartPresence and SmartLink technologies. These exclusive features automatically shut off the heater if no one is detected after a user set “time out” period has passed. An industry-leading early detection system that uses two independent safety controls to continuously monitor the electronics and shut off heating before an overtemperature condition occurs. Precise stirring from 60 to 1600 RPM is made possible by the design of a powerful motor, strong magnet and software-controlled ramp rate, ensuring secure magnetic coupling for viscous applications. SmartHeat allows you to set the maximum temperature of the unit and SmartRate enables fast or slow temperature and speed ramp rates. The programming feature allows storage of 5 multi-step programs. INCLUDED: The Ohaus Guardian 7000 e-G71HS10C Hotplate Stirrer, 120V includes: - Two Stir Bars (40 x 8mm and 28.6 x 8mm) - 8" Stainless Steel RTD Temperature Probe - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

110V