Hermle Z207-3202 4 x 8 PCR Strip Rotor (for Z207-M only)

Temperature range: 4 to 105°C Block homogeneity: ±0,2°C at 72°C Control accuracy: ±0,1°C Cooling ram (more)p rate: Max. 5°C/s Heating ramp rate: Max. 5°C/s Lid temperature range: 40 to 120°C Dimension (WxHxD): 300 x 280 x 380 mm Weight: 13,3 kg

This Thermo Scientific ARKTIK Thermal Cycler Type 5020 96 Well was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and is in good working order. The only issue is the screen is very dark it is however still readable. It is in good cosmetic condition with marks from use. It is fitted with 96 Well Block.

This Applied Biosystems Abi Prism Model 7000 PCR Sequence Detection System was removed from a univer (more)sity lab where it was surplus to requirements. This was removed from a university lab where it was surplus to requirements. The unit powers up and has passed all self-tests. It is in good working order. It comes with a Dell Optiplex PC, Keyboard & Mouse.The PC has a fresh install of Windows XP and it is running AB SDS 1.2.3. There is a 96-Well 5mm Thermal Cycler Block in it.

Applied Biosystems 7500 Fast Real Time PCR System This was removed from a university lab where it w (more)as surplus to requirements. The unit powers up and has passed all hardware testes. The lamp is showing 2029 hours. It is communicating with the Windows 7 PC which has ABI Life v2.3 installed. It is in excellent cosmetic condition with minor marks from use. With it are; 1x Dell PC:Model Optiplex 7010 1x Iiyama Prolite MonitorModel B2282HS21.5 inch screen 1x Dell Keyboard:The unit is in good working and cosmetic condition. 1x Dell Mouse:The unit is in good working and cosmetic condition. Connecting cables.

IKA DB 1.1 PCR Tube Dry Block

The Horizon 20-25 Horizontal Gel Electrophoresis Apparatus is designed for separation of preparative (more) and analytical quantities of nucleic acids. It is suitable for agarose gel electrophoresis procedures in which buffer circulation may be required. The Horizon 20-25 apparatus is designed for simplified gel casting and electrophoresis. This apparatus is engineered for durable performance and easy storage. Current range: 4 – 360 mA, 0.5 A max Voltage range: 250 VDC Max

Philips IU22 Diagnostic Ultrasound Machine This item was removed from a university where it was surp (more)lus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. We are told the unit is in working order but will require a service.

Edinburgh Instruments Time-Correlated Single Photon Counting System This system was removed from a u (more)niversity lab where it was surplus to requirements. Although all units successfully powered on, we cannot test it completely at our facility. Condition varies as stated below each item. The system includes the following components: Edinburgh Instruments Spectrometer SystemSerial#: 178 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the control box, PMT Cooler Controller & PC with Software. The following tests were conducted: 1. Excitation Mono Successfully Initialised2. Emission1 Mono Successfully Initialised3. Excitation Polariser Successfully Initialised4. Emission1 Polariser Successfully Initialised5. Sample Holder Temperature Successfully Read6. nF Iris did not initialise (nF Iris Cable present but unable to find port)7. TAC Range & Scaler Successfully Initialised All tests were performed using CD900 Test software. However, unable to open EAI Level 2 Edinburgh Instruments CD900 Software due to requiring Software Protection Device. Additionally, the system includes: Edinburgh Instruments Nanosecond Flashlamp HeadModel: nF900Serial#: 095Mfd: 03/2000 The item is in good cosmetic condition and pairs successfully with the Spectrometer System. Edinburgh Instruments nF900 ControllerModel: nF900Serial#: 092Mfd: 03/2000 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included. Edinburgh Instruments CD900 ControllerModel: CD900Serial#: 112Mfd: 03/2000 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included. Lastly, the system includes an Elonex ProSentia PC, iiyama ProLite B2290HS Monitor, Elonex Keyboard & Microsoft. All items are in good cosmetic condition and in full working order. The PC runs Windows 98 and the software installed includes EAI Level 2 (requires Software Protection Device), F900 test, and Cd900t (requires Software Protection Device).

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

F1 Mass Standard - knob weights, wooden box. Nominal value - 200 kg.

With use of IM01.EX communication module it is possible to expand communication interfaces range of  (more)the HX5.EX indicator. The module is installed outside the hazardous area, and connected to the indicator using intrinsically safe interface. IM01.EX allows to establish communication between the scale and various accessories, e.g. barcode scanners, printers, displays, control buttons, light signalling towers, buzzers and other controlling/signalling devices. It also enables connection with systems of automatic adjustment and control of industrial processes, and with superior IT systems. IM01.EX-5 interfaces: 2 x RS232, USB, 4 IN, 4 OUT (digital), PROFINET. It is possible to configure module interface quantity following the Interface Configuration Table that is to be found in product data sheet.