Sartorius B.Braun Certomat BS-1 Universal Halterung Attachement Base 800x420mm

Unused demo product in original packaging. Great condition. 12 months warranty. For: - Hei-Tec - Hei (more)-Connect - Hei-End - Hei-PLATE Mix 'n' Heat Core

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

GE Lifescience BioProcess Glass Chromatography Column BPG 140/500 This was removed from a university (more) lab where it was surplus to requirements. It is in good cosmetic condition with very minimal marks from use. Model: 140/500Serial#: 1598551Code#: 18111308Manufactured: 2012 Item specifications: Tare mass: 25KGOperating temp. TS: 4-40ºCMax column volume: 8LDesign Pressure PS: 6 bar gMaximum filling mass: 12kgPED fluid group/cat: 1/NA Item fitted with:2 x GE Healthcare Salvi DN6 1081 4-way 316L Valve 18-5757-01 w/ 1/2" Sanitary Fitting

This Biotage Jones Chromatography Flashmaster II System was removed from a university lab where it w (more)as surplus to requirements. The unit powers on and is in very good cosmetic condition. It has not been tested further at our facility. There is some chipped paint along the top of the unit and scuffs and scratches from general use.

Camera for a gel documentation system No software As-is

This Boost-A- Break Break Tank & Pump Set with Type AB Air Gap BTABV 22S500 was removed from a u (more)niversity lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. Tank inside dimensions - 40 x 21 x 40cm

Polyscience BA06A1G3-110A1NC DuraChill Benchtop Chiller, -20C to 30C, 900W, 120V Flow Rate 15L/min  (more)(4 gpm) Temperature Range -20C to 30C Cooling Capacity 900W at 20C Features - Intuitive touchscreen display with 5 operating languages (Chinese, English, French, German, Spanish) - Full text messages and audible alarms - Continuous fluid level monitoring to prevent premature pump failure - Variable Fan Speed Technology for quieter operation - UV Light Biological Growth Inhibitor - Patented Self-diagnostic system - Low flow shutoff and alarm, high and low temperature alarms - Displayable temperature units in C or F - RS232, Dry Contact On/Off/Status; optional USB-B and Remote Probe port The Polyscience BA06A1G3-110A1NC DuraChill Benchtop Chiller offers advanced cooling technology with a temperature range of -20C to 30C and a cooling capacity that varies from 150W at -20C to 900W at 20C. It features a microprocessor-based temperature controller with a high-resolution TFT LCD display, enabling temperature readouts in °C or °F and pressure display with an accuracy of ± 35% of full scale. The user-friendly interface includes a touch screen display, a multi-language interface, and touch keypad for precise temperature set-point adjustments. The chiller utilizes a Cool Command modulated refrigeration system to enhance temperature stability and extend compressor life, while the WhisperCool Environmental Control System optimizes noise reduction and energy efficiency. It comes equipped with a centrifugal (magnetic drive) pump capable of delivering a flow rate of 15L/min at 0 psi, with pressure up to 18 psi. Additional features include continuous level sensing in the standard reservoir (1.5L capacity) for pump protection, and an optional UV Anti-Growth Light to prevent biological growth in the process fluid. This makes the DuraChill Chiller a robust and efficient solution for demanding applications where tap water cooling systems fall short. Click Here to View Product Video INCLUDED: The Polyscience BA06A1G3-110A1NC DuraChill Benchtop Chiller, -20C to 30C, 900W, 120V includes: - 1 Pair of 1/2" NPT x 3/8" Barbed Fittings - 1 Pair of 1/2" NPT x 1/2" Barbed Fittings - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic Panthera TEC-BD/DF/RL/TL Trinocular Upright Industrial Microscope, 6x4 Stage Objectives 5X, 10 (more)X, 20X, 50X CCIS BD Plan Achromatic & S-Apo (Pb free) DIN (for Brightfield and Darkfield) Optical System Colour Corrected Infinity Optical System (CCIS) Illumination 3W LED Epi-Illumination Features - Panthera TEC models include brilliant optics and smart functionality for extended ease of use. - Features Smart Darkfield with 5 Segment illumination mode. - New LD Plan Achromatic and S-Apochromatic BD objectives & 22mm FOV eyepieces. - Pure incident or incident/ transmitted microscope stands available. - 3W LED of selectable color temperature for incident illumination. - Motic LightTracer: Coded nosepiece & Digital light intensity knob. The Panthera TEC offers high value for the inspection of semiconductors and compound materials, especially in industrial quality control and technical education. Brightfield, Darkfield and Cross Polarization contrast are combined with a new, unique-to-Motic segmental illumination that all contribute to the versatility of this model. This concept allows an oblique incident illumination, perfect for the detection of scratches or other defects on flat and reflecting surfaces without a need to move the sample. BD models feature LD Plan BD objectives with a superb imaging performance, mounted on a 5-fold nosepiece. The light intensity for each objective position is automatically memorized and will be repeated once the objective is swung in again. The compact Epi illuminator carries a slot for polarizer and analyzer, ready for Polarization contrast and to reduce internal reflections. The illuminator also includes the controls for varying the incident light in terms of mode (BF or DF) and illumination angle.INCLUDED: The Motic Panthera TEC-BD/DF/RL Trinocular Upright Industrial Microscope, 6x4 Stage includes: - 5X/0.13 (WD 17.3mm) - 10X/0.25 (WD 16.3mm) - 20X/0.40 (WD 7.3mm) - S-Apo 50X/0.80 (WD 1mm) - Dust Cover - Allen Key - Screws for Metal Extension Support - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Edwards nXDS20iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS20iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS20iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS20iC Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement28.0 m3h-1 / 16.5 ft3min-1Peak pumping speed22.0 m3h-1 / 13.0 ft3min-1Ultimate vacuum (total pressure)0.030 mbar / 0.022 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed10Maximum continuous inlet pressure50 mbarMotor power 1-ph260 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.6 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange< 4.5 mms-1 (rms)Leak tightness (static)< 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsParameterEdwards nXDS6iCEdwards nXDS10iCEdwards nXDS15iCEdwards nXDS20iCNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }