Kratos Analytical Axima-CFR Plus MALDI TOF Mass Spectrometer Lab

Bruker Microtof Bench Top ESI-TOF MS Lab This item was removed from a university where it was surplu (more)s to requirement. It is in reasonably good cosmetic condition, with some damage sustained to the casing as displayed. It powers on, but we are unable to conduct further at our facility. The power supply cable is included.

Kratos Analytical Axima-CFR Plus MALDI TOF Mass Spectrometer This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in excellent cosmetic condition with only minor marks.

Bruker Ultraflex TOF/TOF Mass Spectrometer This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up but has not been tested further at our facility. The unit has some faults as confirmed by the lab On arrival system was in fault mode with 'laser interlock' error. Restarted the laser through marathon control and tested. The laser started to fire but then the high voltage switched off. Tested HV supplies and found that the ISS could only reach 19kv instead of the required 25kv. Suddenly the system started working again and peaks were seen on the sample BUT the system has 2 issues that are intermittent. 1. 30kv supply 2. Laser

Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories This was removed fr (more)om a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. We are told it was working when it was last used in 2020. It is in good cosmetic condition with minor marks. Included with it are; Original software on CD-ROM X Series PlasmaLab 2.6 ICP-MS softwareSeveral manuals, safety, performance and maintenance schedule, pre-installation and operationNew and used spare skimmer and sampler conesSpare electron multipliernew and used spare printed circuit boardsVarious tubing and connectorsPacket of various Thermo O ringsMany other unidentified small parts in sealed packaging

Agilent / HP 1100 Series System With Spiderling Oven, 1100, Degasser, MSD This system was removed fr (more)om a university where it was surplus to requirement. All units are in good cosmetic condition and power on independently, we are unable to conduct further testing at our facility. The lab confirmed the system was working when last used in 2022. This system comprises the following: 1 x Spiderling oven -CS4000 1 x Agilent 1100 Automatic Liquid Sampler -G1313A 1 x HP 1100 Series Diode Array Detector -G1315A 1 x Agilent 1100 Pump -G1312A 1 x HP 1100 series Degasser -G1322A 1 x Agilent MSD -G1956B 1 x HP 1100 Series Solvent Tray-G1322A

Freeze dryers pilot-scale BK-FD20/30 Series. Models: standard (BK-FD20S and BK-FD30S), with stopper (more)ing (BK-FD20T, and BK-FD30T). Temperature min. trap of cold -80ºC. Temperature trays adjustable from -50ºC to +70ºC. Precongelación and drying in the same space. Vacuum < 0.1 mBar. Ability to trap cold 13.5 L. Ability to capture water 6.5 kg/24h. Total capacity of liquid 4.5 L (BK-FD20x) or 7-L (BK-FD30x). Dimensions: trap cold 240x300 mm (diameter/height); camera freeze-drying 470x485x420 mm; trays 305x405x17 mm Trays heated by silicone oil. Touch-screen LCD. Register of historic data a month. USB for data export. Includes vacuum pump 22m3/h. The price shown is for the model BK-FD20S. For other models consult the drop-down.

This Sanyo Ultra-Low Temperature Freezer MDF-U3086S was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition with minor marks. Internal dimensions are: L49cm x W50cm x H112cm.

GILSON p200 micropipettes (20-200 microliters). They are supplied calibrated-sterilized and free of  (more)RNase.

Balance of the AS R1 PLUS series is a standard analytical weighing device of the SYNERGY LAB line. T (more)he AS R1 PLUS is exceptional due to a range of modern constructional and system solutions that guarantee reliability, precision and accuracy of measurement, and make everyday operation easy. Ergonomic Mechanical Design The latest AS R1 PLUS analytical balance features spacious weighing chamber, and the open-door clearance facilitates easy access to the weighing pan. With this it is possible to use laboratory glassware of various sizes. New aluminium base is a guarantee for weighing system stability. Dual-CLICK system allows tool-free assembly and disassembly of the weighing chamber, and a special design of guides for weighing chamber panes (no rims) makes keeping the device clean convenient. Innovative construction solutions increase balance durability and reliability in long-term operation. Levelling System Standard AS R1 PLUS balances are equipped with a levelling device located at the front of the weighing chamber, which facilitates level control. Levelling operation is now simplified and easier due to the reduced quantity of adjustable supporting points (2 points). Intuitive Operation Balances are equipped with LCD display ensuring clear presentation of the weighing result. Direct access to functions and databases is possible via the following keys: Database &ndash; direct access to databases, Function &ndash; direct access to basic functions, F1-F4 &ndash; programmable function keys and menu navigation keys. AS R1 PLUS analytical balances signal operated working mode, computer connection, battery status, weighing and service functions via pictograms. The quantity of displayed weighing units is also expanded. Dedicated status bar enables display of additional messages, e.g. product name, tare value. Real-time mass measurement is presented using bar graph. ALIBI Memory Data safety is ensured by the ALIBI memory integrated into AS R1 PLUS balances, which enables record of up to 100 000 weighings. ALIBI guarantees continuity of data collection over a long period of time. Data Protection Access to valuable information is possible after logging. The administrator manages the data access configuration. Databases The information system is based on 5 databases, which allows several users to work with several product databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: operators (up to 10 users), products (up to 1000 products), weighings (up to 5000 weighings), tares (up to 100 tares), ALIBI memory (up to 100 000 weighings). Communication Interfaces The functionality of AS R1 PLUS balances can be expanded using the following communication interfaces: USB-A, USB-B, RS 232, Ethernet, Wi-Fi (option). The additional USB port located at the front of the balance enables easy and fast communication with the USB flash drive, it is possible to connect additional devices via this port too. AS PLUS balances are equipped with Kensington Lock, which allows to secure the device against theft.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Gilson Microman M100E Pipette, 10-100ul The ergonomically designed MICROMAN® E positive displacement (more) pipettes, along with disposable capillary piston (CP) tips, provide the highest precision when pipetting viscous, non-aqueous liquids such as oils, blood, glycerol, and more, while protecting the pipette from contamination. MICROMAN E is available in six models covering a volume range of 1 to 1000 µL. MICROMAN E relies on positive-displacement technology to improve the precision of transferring viscous and volatile liquids. The capillary piston (CP) tips eliminate the air cushion between the sample and piston so volume accuracy is not affected by the sample’s properties. Tackle these issues with MICROMAN E: - Viscous solutions—difficult to aspirate and stick to pipette tips. - Volatile solutions—leakages are created from differences between solvent vapor pressure and the air pressure within the pipette. - Cold liquids—delivered in excess amounts. - Hot liquids—under-delivered amounts. Designed with Comfort and Performance in Mind The Red Dot Award winning design of the MICROMAN E features an improved handle shape that rests comfortably in your hand, with a large push button for easy aspiration and dispensing. The volume-locking switch allows for easy volume adjustment and minimizes the risk of accidentally changing the volume during pipetting tasks. Overall Protection The positive-displacement technology of the MICROMAN E is ideal when dealing with infectious solutions and radiolabeled components. Since the disposable piston makes direct contact with the sample, the user and the pipette are protected. Within molecular biology and forensic sciences, any trace of a previous sample can lead to erroneous results and the disposable CP tips provide absolute protection against cross-contamination. INCLUDED: The Gilson Microman M100E Pipette includes: - Operator's Guide - One Year Manufacturer's Warranty