Bruker Ultraflex TOF/TOF Mass Spectrometer Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Varian DS-602: Equipped with a Bruker GE8221 sound dampening cabinet

Agilent 7500c ICP-MS G3155A Inductively Coupled Plasma Mass Spectrometer Lab This item was removed f (more)rom a university where it was surplus to requirement. It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply, Serial No: 9001305 008, Model No: SDS400-3628-1, SSI P/N: 20-0049-015N - Multifan 4394, GB-PAT: 2133082 2075288, ASSY by PAPST in Hungary   - Dynode FINNIGAN P/N: 97000-98042 REV-C  - Aux valve TYPE: DEMB3628028, S/N: 237085000104  - 5kV power supply 97000 10070C  - Ion Gauge   - LED front panel + 4 screws ASSY No: 97000-61400 REV-C  - Vent Delay PCB panel ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

Waters Trap TriWave 289002940 M95B2227C1 T-Wave Mass Spectrometry Device This was removed from a uni (more)versity lab where it was surplus to requirements. The item is in good cosmetic condition but there are marks from prior use. The item is untested.

This was removed from a university lab where it was surplus to requirements. The system powers up an (more)d communicates with the PC and Software. It has not been tested further. It is in good cosmetic condition with minor marks. Applied Biosystems MDS SCIEX QSTAR EliteAssy no. 1017064SN - AP10870612 Parts inside identified:-2 x Oerlikon Leybold Vacuum Turbovac Wide Range TW 690 MS1 x Leybold Vacuum Turbovac TW 250 S1 x SCIEX Turbo Ionspray, Assy no. 019296, SN - 0550009281 x Inficon VGC0231 x Spellman Unit1 x 024143 Nanospray Switch Module Pump on wheels:-MDS SCIEX Assy no. 022832, SN - 70208570839 Pump Inside unit:-Varian DS 602, Model 949-9335, SN - 245808With Varian Oil Exhaust Filter NW25 coming out of topModel - 949-9392Powers on and appears to be in working condition. Dell PC:-MDS SCIEX PN - 1018761Computer - P670 with ImageComes with Dell 17" Monitor,Keyboard & MousePC Powers on and has Analyst QS 2.0 SoftwareUsername - Administrator, No Password Spare parts & accessories:-1 x SCIEX Ion Sprayer, Assy no. 017614, SN - 08610507071 x SCIEX Heated Nebulizer, Assy no. 014989, SN - 219970226 w/ Assy no. 14368, SN - 3119703121 x Part 022765-B CFN 06851 x Box labelled Maldi Plates, contains 2 x AB PN:4347689 & Approx 50-60 plates1 x Box labelled Nano flow head with part inside1 x CS Lilin PIH-090 9" Monitor (SN-0000553) - Powers on1 x ULTRAK 9" Video Monitor Model - KM0900MN, SN - M2060084 - Powers on1 x Ionwerks TDCx81 x SCIEX PN - 1009917, SN - 000519 - Powers on1 x Box labelled QStar Elite RF Coils w/ parts 1003097 B & 1003098 B attached to SCIEX Filterboards1 x MDS SCIEX PCB Interconnect, 022102-D, CFN2 x Boxes labelled QStar elite parts - Full of small parts2 x Leybold Vacuum TurboVac TW 690 MS1 x 024143 Nanospray Switch Module1 x 1002133 Signal Handling Module1 x Harvard Apparatus Cat no. 98-0921, SN - 148161 x Inficon VGC023, SN - 399-557 - Powers on2 x Oerlikon Leybold Vacuum Turbo Drive 690 MS1 x Oerlikon Leybold Vacuum TW 250 S, SN - 209004514962 x SCIEX Turbo Nanospray, Assy no. 019296, SN - 037000911 & 113500701221 x SCIEX Ionspray, Assy no. 017614, SN - 6560307081 x QLP 022353-A1 x Spellman PN - X3359, Model - CZE5PN37X3359, SN - 52760-1-A00295 - Powers on7 x Gold Modules:-QPS Amplifier 1010829CCPS 1017191Lens PS 1024829QPS Exciter 1008444System Controller 1008411DACS & Vaccum Gauge 1024717HVPS 1012202 5 Folders of Manuals, service records, Hardware guides and Logbooks

THE TOP MODEL OF THE 5 SERIES Ideal for laboratories requiring precise sample temperature control an (more)d maximum reproducibility. The AREX 5 Digital magnetic stirrer is a beautiful instrument with a dual digital display for thermoregulating samples with an accuracy of ± 1.0 °C. Thanks to the VTF system then, it will be possible to achieve an accuracy of ± 0.5°C. Pt100 and Pt1000 probes are also available as an option. RESISTANCE, SAFETY AND PERFORMANCE The plate of the AREX 5 Digital Velp model is IP42 certified and is made of aluminum alloy coated with a ceramic layer, which guarantees protection from scratches and chemical agents, making it very resistant and easy to clean. It is therefore preferred in laboratories where acids, bases and solvents are used. Safety circuits and overtemperature protection guarantee complete protection for the operators. Two light indicators inform the user when the heating function is active. Even when the instrument is switched off, a safety message ('HOT') remains on the display until the plate temperature drops below 50°C. A further alarm will detect the presence of the probe. The plate structure and the insulating disc protect the internal parts and ensure high resistance to the most demanding laboratory environments and applications, for example when working with cold fluids (below 0°C). AREX 5 is designed to last over time and like most Velp products it is guaranteed for 3 years. THERMOREGULATION When a temperature probe is connected, it is possible to choose 2 different thermoregulation modes to satisfy all laboratory needs: - FAST: the set temperature is reached quickly - FINE: the set temperature is reached more slowly, minimizing the overshoot SHAKING AREX 5 is equipped with a powerful brushless motor for daily applications, being able to agitate up to 20 liters (H2O). It is also equipped with SpeedServo™ technology, which allows the speed to be kept constant even when the viscosity of the sample varies. The combination of the powerful brushless motor and the strong magnetic coupling ensure homogeneous stirring, even in the peripheral areas of the plate, guaranteeing a constant speed in all positions. DESIGN The compact, innovative and attractive design offers comfort and safety both during benchtop applications and in laboratory fume cupboards. The inclination of the front panel is designed to optimize the user experience and the bright LED display allows easy reading and constant monitoring of the temperature and stirring speed. APPLICATIONS AREX 5 is the ideal solution for temperature sensitive applications in many industrial, research and academic laboratory sectors. THE AREX DIGITAL PANEL: BEAUTIFUL AND SIMPLE TO USE By turning the left knob it will be possible to adjust the temperature up to 310°C, while with the right one it will be possible to set the stirring speed from 50 to 1500 rpm. COMPARISON TABLE OF THE NEW VELP SERIES 5 MAGNETIC STIRRERS:

Weighing capacity: 60/210 g Readability: 0.01 mg Repeatability (0 – 60 g): ≤ ±0.015 mg Repeatability (more) (60 – 210 g): ≤ ±0.025 mg Linearity:  ≤ ±0.1 mg Response time (average): ≤ 8 s Weighing pan diameter: 90 mm Weighing chamber height: 239 mm Dimensions (WxDxH): 252 x 533 x 292 mm Weight: 11.1 kg

Coffetek Gourmet 83545 Touch Display Coffee Machine Lab This item was removed from a university wher (more)e it was surplus to requirement. It is in good cosmetic condition and powers on, but it has been out of use for 5+ years. It will require a service. Key not included.

F2 Mass Standard - knob weights, wooden box. Nominal value - 500 kg.

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 mass standard: flat polygonal sheet Nominal value: 2 mg Material: aluminum F1 Class Mass Standards – Key Features Highest Precision and Accuracy - F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions - An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards - The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials - F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Application 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

Hermle OLEUM ROTOR PKG - Rotor Package (Complete with Rotor, Buckets and Inserts) The Hermle OLEUM R (more)OTOR PKG is a rotor package that includes a rotor, buckets, and inserts for use with the Hermle OLEUM Oil Testing Centrifuge. It has a maximum speed of 3,000 RPM and a maximum relative centrifugal force (RCF) of 2,213 x g, making it suitable for applications that require high-speed centrifugation. The package can process up to 4 x 100ml samples efficiently, and the rotor's unique design ensures accurate and reliable separation of samples by centrifugation. INCLUDED: The Hermle OLEUM ROTOR PKG - Rotor Package includes: - Z600-OL-COM Rotor - Z600-OL-BUK Buckets - Z600-OL-INS Bottom Inserts - Manufacturer's Documentation - 2 Year Manufacturer's Warranty