Thermo Elemental X Series ICP-MS Mass Spectrometer w/ Software & Accessories

This Thermo Finnigan LCQ Deca XP Plus Mass Spectrometer was removed from a university lab where it w (more)as surplus to requirements. The unit is in good used cosmetic condition but it does have various marks and signs of general use. The main board and mains switch have now been removed and sold. Not all the cables/connectors etc were re-connected during re-assembly. The following other parts were also removed; - Power supply, Serial No: 9001305 008, Model No: SDS400-3628-1, SSI P/N: 20-0049-015N - Multifan 4394, GB-PAT: 2133082 2075288, ASSY by PAPST in Hungary   - Dynode FINNIGAN P/N: 97000-98042 REV-C  - Aux valve TYPE: DEMB3628028, S/N: 237085000104  - 5kV power supply 97000 10070C  - Ion Gauge   - LED front panel + 4 screws ASSY No: 97000-61400 REV-C  - Vent Delay PCB panel ASSY No: 97000-61370 REV-A It also comes with;1 x LCQ Hardware Manual.2 x Vacuum hoses with breeze hose clamps.Various other front assembly parts. This is sold for spares/repairs

Finnigan MAT LCQ Mass Spectrometer System This was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks Includes:1 x Spare System Control Board, ASSY No. 97000-61350 1 x Probe14 x instruction booklets relating to the system and usage

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System This system was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Includes: HAZMAT-0100045 Calmix Working Solution Bottle Expires : 11/30/2023

Thermo Scientific LTQ Orbitrap Velos with ETD Mass Spectrometer This was removed from a university  (more)lab where it was surplus to requirements. The university said it hadn't worked properly for some time, and on inspection, it had been slightly stripped for parts. We did not power it up to avoid damage to the unit. It is in otherwise good cosmetic condition with marks from use.

Varian 4000 GC/MS/MS Gas Chromatograph Included: Varian 3800 / 3380 MS4000 mass spectrometer Without (more) auto sampler Without Software Without a computer Untested equipment A few lines on the screen (see photos)

Sanyo MDF-U442 Medical Freezer Lab This item was removed from a university where it was surplus to r (more)equirement. It is in good cosmetic condition and powers on, but it is not functional as it stays at ambient room temperature and triggers the alarm when the desired temperature is set. Therefore, it is listed as Spares/Repair.

This jet engine is being sold on behalf of a leading UK universities engineering and aerospace depar (more)tment. The engine which would have originally cost around 1 million USD was owned by MyTravel Aircraft Engineering. It was designed for the DC10 aircraft. In 2004, the engine type was retired as MyTravel retired the DC10 and moved to the Airbus Aircraft. Rather than disposing of the engine, it was moved to this universities engineering department as a training resource for students. This is a genuine full size jet engine. Its an extremely rare opportunity to acquire a unit like this. General Electric Model: CF6-6D1A Jet EngineRemoved from retired DC10-10 AircraftHas flown about 40 million miles in its 20-year working life. Please note - whilst the engine was operational prior to going into storage, it is no longer in service and we can offer no warranties to its current performance. It is initially intended for sale for display / museum purposes only, and therefore we would need to discuss any intended flight of the engine or any of its parts. There is some damage to the nose of the engine which occurred after the item was collected and is not shown in the original photo. We have got images of the damage. It is a non negotiable of sale that we will need to diligence check the intended use of any prospective buyer. In most cases, a non-flight disclaimer will be required unless you are able to provide appropriate documentation / evidence to demonstrate that any intended use will meet the requirements of the Civil Aviation Authority or other relevant governing bodies. We can discuss this further with you prior to sale and then we would need to approve any proposed flight plans with our university client prior to sale.

Hakko Electronics Monitouch V810iCD screen Monitouch V810iCD ( by Fuji Electric ) Display Type : TFT (more) Color LCD Colors : 65K Color or 32K color with blink mode Resolution : 640 x 480 Rating : IP65 with gasket / IP20 from rear Memory : approx 4.5 MB SRAM : 128 KB PLC 9 Pin Serial Ports : DB9F (RS232C, RS422, RS485)Data transfer 8 pin Modular Serial Ports : 2 - RJ45 (RS232C, RS422, RS485) 24VDC PWR 10.4" VGA TFT UL/c-UL CE Analog Resistive Touch Switch Built-in Ethernet Weight : 5 Kg

F1 class mass standards are exceptional measuring tools that represent the pinnacle of precision in  (more)the field of metrology. Classified as F1 metrology class, they are perfect for advanced applications where every detail of measurement is of paramount importance. F1 mass standard: flat polygonal sheet Nominal value: 50 mg Material: nickel silver F1 Class Mass Standards – Key Features Highest Precision and Accuracy - F1 class mass standards are characterized by absolute measurement precision and extraordinary accuracy. They are designed to meet the most stringent standards for acceptable deviation from actual weight. Stability under Difficult Conditions - An important feature of F1 class mass standards is their ability to maintain measurement stability even under harsh environmental conditions. The standards of this class are resistant to changes in temperature, humidity and other factors that affect the precision of measurements. Calibration in Accordance with International Standards - The calibration process for F1-class mass standards is rigorous and in accordance with international standards. This ensures that standards of this class are globally recognized and can be used in different countries. Specialized Construction Materials - F1-class standards are often made of materials with unique physical properties. This provides them not only with precision, but also with durability and wear resistance. Application 1. Industrial Metrology F1 class mass standards are used in metrology laboratories engaged in the testing and maintenance of measurement standards. 2. Scientific Research In scientific research, especially in high-precision fields such as physics and astronomy, F1-class mass standards are a key tool. 3. Aerospace Industry In the precision mass measurements required by the aerospace industry, F1-class standards guarantee reliability and accuracy. 4. Calibration Laboratories In calibration laboratories where uniformity and precision are a priority, F1-class mass standards are the standard of excellence. F1-class mass standards are synonymous with the highest quality and precision in the field of metrology. Their use is crucial where even the slightest deviation from the standard can carry unpleasant consequences. They are tools for advanced applications that contribute to raising standards in the field of mass measurement.

This model is particularly suitable for simple mixing tasks. In short-term operation mode, the shaki (more)ng motion is triggered by pressure on the test tube tray. This mode is suitable for mixing up solutions, for example. Persistent cell pellets can be dissolved gently but powerfully in continuous operation. With a speed of up to 2400 rpm and a shaking orbit of 5 mm, reliable and uniform distribution of solids, and homogenization of highly viscous media are guaranteed. Motion: vibrating Rotation speed range: 200 – 2400 rpm Operating Mode: automatic or continuous Orbit/Stroke: 5 mm

Water Specifications: Including 350L storage tank with automatic Uv sanitation module.