Agilent / HP 1100 Series System with LC/MSD SL G1956B Mass Spectrometer Lab

FURTHER DETAILS TO FOLLOW

Sciex Pulser Module  PN 025195 This was removed from a university lab where it was surplus to r (more)equirements. The item is in a reasonable, used cosmetic condition but is untested. Sciex Pulser Module025195 x

Finnigan MAT LCQ Mass Spectrometer System This was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks Includes:1 x Spare System Control Board, ASSY No. 97000-61350 1 x Probe14 x instruction booklets relating to the system and usage

Waters Micromass EMD 1000 Lab This item was removed from a university where it was surplus to requir (more)ement. It is in good cosmetic condition but does not power on, therefore it is listed as Spares/Repair.

Waters Micromass Q-Tof micro Mass Spectrometer This was removed from a university lab where it was s (more)urplus to requirements. The unit powers up but has not been tested further. We have been advised that it will require flushing out before it can be used. It is in good cosmetic condition with minor marks.

Sequenom Agena MassARRAY Analyzer 4 System RS1000, PHX-1 & Accessories This was removed from a  (more)university lab where it was surplus to requirements. The system powers up and everything communicates but we were unable to test it further at our facility. The touchscreen on the nanodispense does not work, but we have replaced it with a monitor, mouse and keyboard. There is also a complete peripheral setup provided for the inbuilt PC in the PHX-1 system. Included in the system are; Sequenom Agena MassARRAY Analyzer 4 PHX-1Model: PHX-1Serial#: PX10060104 Sequenom Agena MassARRAY Nanodispenser RS1000Model: RS1000Serial#: 10P0413RS-01 The system also includes the following: Windows XP Software DiscNI Vision Deployment Engine for One UserMassARRAY Nanodispenser RS-1000 User's Guide v1.2.1WebPAM Software DiscFastTrak TX2300/TX4300 Quick Start GuideVarious Replacement parts (shown at end of slide)Various Plates for plate reader.

This listing is for a Indesit SIAA12 Refrigerator. The unit is in full working condition and is rea (more)dy for immediate release. A cool, stylish and efficient model with a sleek white finish, Indesit’s SIAA12 larder fridge would suit any kitchen. Boasting an A+ for energy, this larder fridge offers you generous storage and cooling capacity (346 litres net). Featuring 4 shelves and a salad drawer, your weekly shop will fit in with ease. With no ice box taking up valuable space, the Indesit SIAA12 larder fridge provides great storage solutions and at just 60cm wide this unit is ideal for those whose kitchen space is at a premium.

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Eppendorf S-4x750 Swing Bucket Rotor with 750ml Buckets The Eppendorf S-4x750 Swing Bucket Rotor wit (more)h 750ml Buckets, (Catalog #: 5895120008) accommodates a capacity of up to 4 x 750ml. This rotor can reach speeds up to 4,700 RPM with a maximum RCF of 4,816 x g. This Eppendorf S-4x750 Swing Bucket Rotor and Buckets is for use with the Eppendorf 5910R Refrigerated Centrifuge, Eppendorf 5910 Ri Refrigerated Centrifuge, and Eppendorf 5920R Refrigerated Centrifuge. (Please Note: The adapters pictured above are NOT INCLUDED. Please inquire if you may require adapters). INCLUDED: The Eppendorf S-4x750 Swing Bucket Rotor with 750ml Buckets includes: - S-4x750 Swing Bucket Rotor - 4 x 750ml Round Buckets - Full 1 Year Parts and Labor Warranty Eppendorf S-4x750 Swing Bucket Rotor with 750ml Buckets SpecificationsMaximum Speed4,700 RPMMaximum RCF4,816 x gMaximum Capacity4 x 750mlRadius19.3 cmCentrifuge CompatibilityEppendorf 5910R, 5910 Ri, and 5920R CentrifugesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Crest P1100D-45 Digital Ultrasonic Cleaner w/ Power ControlFeatures - Ceramically enhanced transduce (more)r technology with industrial bonded assembly - Homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping - Adjustable cleaning time or ability to set for continuous operation - Adjustable bath temperature between 20°C to 80°C - "D" models feature an adjustable ultrasonic power in nine steps, along with a Degas function for consistent sample prep applications - Deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning - Intrinsically safe heater with dry-run protection - Drain valve assembly available for tank capacities of 2.5 gallons or higher 45 kHz and 132 kHz frequencies provide precision cleaning and rinsing options, with 132 kHz available for enhanced sample preparation performance All models feature digital display of temperature and time, with "D" models featuring digital display of the ultrasonic power level Efficiently removes flux from PCB's, fats, paints, surface rust, lime, oils, adhesives, polish residues, chemical residues, dust, and much more The Crest P1100D-45 Digital Ultrasonic Cleaner w/ Power Control is a highly efficient cleaning solution featuring ceramically enhanced transducer technology with industrial bonded assembly. Operating at a frequency of 45 kHz, it ensures a homogenous sound field, energy distribution, and prevention of standing waves using frequency sweeping. The cleaner offers adjustable cleaning time or continuous operation and an adjustable bath temperature between 20°C and 80°C. The "D" model includes adjustable ultrasonic power in nine steps and a Degas function for consistent sample preparation. It features a deep-drawn stainless steel cleaning tank with rounded corners for easy cleaning and an intrinsically safe heater with dry-run protection. The unit also has a drain valve assembly for tanks with capacities of 2.5 gallons or higher. The Crest P1100D-45 has a tank capacity of 3.25 gallons (12.3 liters) with dimensions of 11.75 x 9.5 x 8 inches (297 x 237 x 200 cm) and an overall size of 12.75 x 10.5 x 13 inches (325 x 265 x 335 cm). It delivers an average ultrasonic power of 200 watts and features a digital heater adjustable from 0 to 99 minutes, reaching up to 175°F (80°C). INCLUDED: The Crest P1100D-45 Digital Ultrasonic Cleaner w/ Power Control includes: - Tank Cover - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty