Bruker MicrOTOF Bench Top ESI-TOF MS Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

A programmable laboratory oven with multiparametric microprocessor with the possibility of memorizin (more)g 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 300°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable OVEN STF-NR FALC

Biosafe Smart-Max AS-310 Automated Stem Cell Cyroprotectant System Lab This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powers on, but the screen remains blank. Also, it fails to communicate with a PC and emits a burning smell. Therefore, it is listed as Spares/Repair.

Promega Glomax 20/20 Luminometer This system was removed from a university lab where it was surplus  (more)to requirements. The unit powers on and is in good condition with minimal wear. It successfully runs the luminescence measurement program. No further testing was conducted. Specifications: - Model: 2031-000 - Serial No.: 203001378 - Device Configuration: - 20/20 Luminometer Injectors: 0 - GUI Version: 5.0.11 - Firmware Version: 7.12 - FPGA Version: 0011 - FPGA ID: 0800

MAS Y device features an electromagnetic MAS module of high resolution and Y touch panel featuring 5 (more).7” display. The device is intended to be integrated into customer's system. Compact module design plus the in-built electronics allow to adapt the module respectively in accordance with the customer demand. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.1 mg, Overload protection, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The measurements can be carried out using an under-pan weighing solution and a regular weighing pan. By cause of high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The Y panel functionality is remarkable thanks to use of numerous interfaces: 2×RS232, 2xUSB type A, Ethernet, 4×IN, 4×OUT, Wi-Fi. The module comes standard with a dedicated power supply.

Zeiss Axiovert 135 TV w/ XBO 75, Prior Motorised Stage & Control Lab This item was removed from  (more)a university lab where it was surplus to requirements. It is in good cosmetic condition and powers on successfully, with both lamps functioning. All mechanical elements operate smoothly. This microscope has been professionally serviced, the full service report is available on request. No objectives are included. Microscope Components:- Carl Zeiss Axio 3Fl Filter Slider - Filters: HQ, GFO, LP, BP 340, BP 380, FT 425, 500-530, FITC LP - Zeiss C-mount Camera Adapter (Model: 45 61 05) - Zeiss Phase Contrast Nomarski DIC LD Condenser (Model: 45 17 59) - Eyepieces: 2 x E-Pl 10x/20 - Zeiss HAL Lamp House (Model: 44 72 17) - Zeiss Illuminator Lamp House (Model: 44 72 16) Included Accessories and Additional Components: Prior ProScan III- Model: V31XYZ - Serial#: 79693 Prior Control Panel (Joystick)- Model: PS3J100 - Serial#: 80723 Prior Motorised Stage- Model: HK07X135 - Serial#: 1991 - Status: All items successfully communicate, with displays and LEDs fully functional. Includes motorised stage control via joystick, filter switching, and focus control. Does not feature a slide holder. Zeiss XBO 75 Lamp Power Supply- Model: J0470X - Serial#: 1626 - Status: Fully operational with correct cables for microscope connection. The hour clock was reset, showing only 30 minutes of use. Marzhauser Wetzlar Stage- Model: EK 130x85 Axiovert 200 - Serial#: 15042931 - Status: Non-motorized stage.

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Tuttnauer 3950V Lab Line Vertical Autoclave, 220-240V Chamber Volume 60L Sterilization Temperature  (more)Range 121°C to 134°C Chamber Dimensions 15.3 x 19.9 in. (38.9 x 50.5 cm) Features - Designed to autoclave everything in your lab, including liquids, plastic, glass, sealed bottles, and bioreactors - No need to connect to building utilities, includes built-in reservoir - Built-in condensation reservoir - Two integrated temperature probes for complete sterilization of liquids - User-friendly touch screen control panel - 3 Year Manufacturer's Warranty

Polyscience AP45R-20-A13D 45L Refrigerated Circulator, Advanced Programmable (-25 to 135C), 208-230V (more)3D Visualization of the Polyscience CirculatorThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The Polyscience AP45R-20-A13D 45L Refrigerated Circulator is intended for the precise temperature control ofsuitable liquids in a reservoir. Extremely easy to use and maintain, itcombines design innovation with highly intuitive operation to deliverconvenient and versatile liquid temperature control for a wide range ofapplications.Features Time/temperature programming (ten 100-step programs) Intuitive 4.3” (10.9 cm) SmartTouch display 6 languages: French, German, Spanish, Chinese, Arabic, English Variable speed pump with open- and closed-loop external circulation capability Swivel 180™ Rotating Controller On-board connectivity: USB-A & B, Ethernet, RS-232/RS-485, and external temperature probe Event scheduling (time & date) with real-time clock Review temperature trends for up to 10 days Multiple selectable “home” screens On-screen help Automatic and/or user-adjustable performance optimization 5-point calibration capability Click Here to View Product Video INCLUDED: The Polyscience AP45R-20-A13D 45L Refrigerated Circulator, -25°C to 135°C, 1400W; 208-230V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Gilson PIPETMAN M P1200M BT Connected, 100-1200uL Pipette Volume Range 100-1200uL Adjustable or Fixe (more)d Volume Adjustable Volume Pipette Type Electronic Air Displacement Features - Bluetooth-enabled electronic pipette enhances accuracy and precision in standard and repetitive pipetting modes - Reduces pipetting fatigue and increases efficiency with minimal force needed for aspiration and dispensation - Features motorized piston for high reproducibility and accuracy, reducing the risk of human error - Offers five pipetting modes: pipette, repetitive, mix, reverse, and custom with up to 10 programmable protocols - Bluetooth connectivity facilitates communication with TRACKMAN Connected, guiding through protocols with real-time feedback - Ergonomic design ensures comfort and ease of use, including a simple push-button operation and tip ejection The PIPETMAN M Connected is a Bluetooth-enabled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, PIPETMAN M Connected helps reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected making planning and executing pipetting protocols faster, easier, and more reliable. PIPETMAN M Connected is available in 20 models covering a volume range from 0.5uL to 10mL in single channel, and 0.5uL to 1200uL in multichannel. The motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, PIPETMAN M Connected reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette. The intuitive interface has five pipetting modes for many applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions. Aspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort. CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M P1200M BT Connected, 100-1200uL Pipette includes: - Power Supply 5V with AC Adapter and Cable - 4 Battery Side Tags - 4 Ejector Side Tags - Lubricant - Safety Bag - Certificate of Conformity - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty