Kratos Analytical Axima-CFR Plus MALDI TOF Mass Spectrometer Lab

Kratos Analytical Axima-CFR Plus MALDI TOF Mass Spectrometer This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up, but we were unable to test it further at our facility. The lab confirmed it was working before it was replaced but the camera had stopped working making alignment difficult. It is in excellent cosmetic condition with only minor marks. Includes a PC with the following software installed:MALDI-MS Application Ver: 2.8.4 Monitor, Keyboard & Mouse included.

Finnigan MAT LCQ Mass Spectrometer System This was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but has not been tested further. It is in good cosmetic condition with minor marks Includes:1 x Spare System Control Board, ASSY No. 97000-61350 1 x Probe14 x instruction booklets relating to the system and usage

Bruker MicrOTOF Q Mass Spectrometer This item was removed from a university laboratory where it was  (more)surplus to requirements. The mass spectrometer powers on and is in great condition with minimal wear. No further testing has been conducted. Specifications:- Model: micrOTOF-Q - Serial No.: 228888.00074 Included Software:- I/O and Security Software and Documentation - Version: 1.16 - HP / Hewlett-Packard REV.B - CD Kit: 443200-404

Agilent / HP 1100 Series System With Spiderling Oven, 1100, Degasser, MSD This system was removed fr (more)om a university where it was surplus to requirement. All units are in good cosmetic condition and power on independently, we are unable to conduct further testing at our facility. The lab confirmed the system was working when last used in 2022. This system comprises the following: 1 x Spiderling oven -CS4000 1 x Agilent 1100 Automatic Liquid Sampler -G1313A 1 x HP 1100 Series Diode Array Detector -G1315A 1 x Agilent 1100 Pump -G1312A 1 x HP 1100 series Degasser -G1322A 1 x Agilent MSD -G1956B 1 x HP 1100 Series Solvent Tray-G1322A

This was removed from a university lab where it was surplus to requirements. The system powers up an (more)d communicates with the PC and Software. It has not been tested further. It is in good cosmetic condition with minor marks. Applied Biosystems MDS SCIEX QSTAR EliteAssy no. 1017064SN - AP10870612 Parts inside identified:-2 x Oerlikon Leybold Vacuum Turbovac Wide Range TW 690 MS1 x Leybold Vacuum Turbovac TW 250 S1 x SCIEX Turbo Ionspray, Assy no. 019296, SN - 0550009281 x Inficon VGC0231 x Spellman Unit1 x 024143 Nanospray Switch Module Pump on wheels:-MDS SCIEX Assy no. 022832, SN - 70208570839 Pump Inside unit:-Varian DS 602, Model 949-9335, SN - 245808With Varian Oil Exhaust Filter NW25 coming out of topModel - 949-9392Powers on and appears to be in working condition. Dell PC:-MDS SCIEX PN - 1018761Computer - P670 with ImageComes with Dell 17" Monitor,Keyboard & MousePC Powers on and has Analyst QS 2.0 SoftwareUsername - Administrator, No Password Spare parts & accessories:-1 x SCIEX Ion Sprayer, Assy no. 017614, SN - 08610507071 x SCIEX Heated Nebulizer, Assy no. 014989, SN - 219970226 w/ Assy no. 14368, SN - 3119703121 x Part 022765-B CFN 06851 x Box labelled Maldi Plates, contains 2 x AB PN:4347689 & Approx 50-60 plates1 x Box labelled Nano flow head with part inside1 x CS Lilin PIH-090 9" Monitor (SN-0000553) - Powers on1 x ULTRAK 9" Video Monitor Model - KM0900MN, SN - M2060084 - Powers on1 x Ionwerks TDCx81 x SCIEX PN - 1009917, SN - 000519 - Powers on1 x Box labelled QStar Elite RF Coils w/ parts 1003097 B & 1003098 B attached to SCIEX Filterboards1 x MDS SCIEX PCB Interconnect, 022102-D, CFN2 x Boxes labelled QStar elite parts - Full of small parts2 x Leybold Vacuum TurboVac TW 690 MS1 x 024143 Nanospray Switch Module1 x 1002133 Signal Handling Module1 x Harvard Apparatus Cat no. 98-0921, SN - 148161 x Inficon VGC023, SN - 399-557 - Powers on2 x Oerlikon Leybold Vacuum Turbo Drive 690 MS1 x Oerlikon Leybold Vacuum TW 250 S, SN - 209004514962 x SCIEX Turbo Nanospray, Assy no. 019296, SN - 037000911 & 113500701221 x SCIEX Ionspray, Assy no. 017614, SN - 6560307081 x QLP 022353-A1 x Spellman PN - X3359, Model - CZE5PN37X3359, SN - 52760-1-A00295 - Powers on7 x Gold Modules:-QPS Amplifier 1010829CCPS 1017191Lens PS 1024829QPS Exciter 1008444System Controller 1008411DACS & Vaccum Gauge 1024717HVPS 1012202 5 Folders of Manuals, service records, Hardware guides and Logbooks

Yamato VBE-408 48 in. Wide Vented Balance Enclosure, 115V Air Flow 80 FPM Viewing Medium 3/8" Jewel (more)ed Acrylic Plastic Noise Level 55 dBA at 80 FPM Features - Includes top mounted HEPA/Blower filtration, set-up to circulate the internal chamber atmosphere, through the HEPA filter and into the lab - The smooth curved, or rounded ABS™ airfoils provide gentle, unobstructed air flow through rear, and side, baffles and through top mounted HEPA filter - Constructed with optically clear 3/8” jeweled acrylic plastic - Front viewing sash with multiple air foils for higher containment and draft deflection - Includes phenolic base with superior chemical resistance and provides higher analytical balance stabilization - Low vibrations. The black base allows for easy powder detection - Electrical cord outlet port - Air flow alarm system - Adjustable front draft protection - Side blank plate for optional Bag-In / Bag-Out port - Includes face velocity alarm Self-contained laboratory unit ideal for fine powders, chemicals and biological products. Designed with top-mounted HEPA/blower filtration set up to circualte internal chamber atmosphere, through the HEPA filter and into the lab. Constructed with optically clear 3/8" jeweled acrylic plastics and phenolic base with superior chemical resistance. Outside width dimension is 48". 115V. INCLUDED: The Yamato VBE-408 48 in. Wide Vented Balance Enclosure, 115V includes: - Yamato VBE-408 48 in. Wide Vented Balance Enclosure, 115V - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The mass standard is the foundation of accurate mass measurement, as it affects the quality and reli (more)ability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Cylindrical Shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden Packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set Includes: 9 mass standards, 1 tweezer.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

Heidolph Overhead Stirrer Visco Jet Impeller inoJET-120mmParticularly in the case of applications wi (more)th very viscousmedia such as pastes and gels, a very reliable stirring process in the entirevessel without air entry is important. This is what the innovative stirringsystem VISCO JET® offers!The particular shape of the blades triggers an intrinsicallydynamic flow, which shortens the process times with significantly better mixingresults compared to conventional impellers. An all-rounder for aqueous andhighly viscous substances. The VISCO JET® 120 is ideal for vessels with thefollowing characteristics: - ideal vessel diameter: 200- 300 mm - ideal ground clearance: 36 mm - ideal filling level: 200- 300 mm - ideal volume: 6,300 - 21,200 ml The VISCO JET® 120 is made of stainless steel. A stirrer shaft with a diameter of 10 mm is included in the scope of delivery. INCLUDED: The Heidolph Overhead Stirrer Visco Jet Impeller inoJET-120mm includes: - Operator's Guide - Full 3 Year Manufacturer's Warranty

Benchmark MyBlock HL Mini Dry Bath w/ Heated LidThe new MyBlock™ HL is the first and only mini heat  (more)block featuring a heated lid for protecting samples against unwanted condensation and evaporation. Both the block and lid temperature can be selected independently in increments of 0.1°C, making this MyBlock the ideal choice for the most temperature sensitive applications, including immunoassays, LAMP assays, enzyme reactions & other temperature hyper-sensitive procedures. *Block sold separately* Click Here to View Product Video INCLUDED: The Benchmark MyBlock HL Mini Dry Bath w/ Heated Lid includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty