ICT 120-A Falc lab refrigerated incubator

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in full working order. It has been extensively tested and recertified at our facility but will require calibration on installation. It is in good cosmetic condition with marks from use. Internal Dimensions: L 86cm x W 56cm x H 47cm.Shaking area Dimensions: L 76cm x W 46cm.

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation. It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level. Internal dimensions 48x58x48cm LWH

Sanyo C02 Incubator MC0175 This item was removed from a university where it was surplus to requireme (more)nt. The unit powers up and is in good working order (thermometer & co2 analyser not included). It is in reasonably good cosmetic condition, however there is some rust visible and the control cover hinge has broken. The door seal and latch are both in good cosmetic condition. This item includes 4  x Shelves and a Humidity Pan.

Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V Temperature Range Ambient +5° (more)C to 50°C Humidity Control 40 to 97% RH, or no RH Chamber Volume 156L (5.5 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - Allows for direct humidity control from 40 to 97% RH, or no RH - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180°C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO150 K7 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. Further enhancing its functionality, the ICO150 K7 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO150 K7 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO150 K7 CO2 Incubator w/ Active Humidity Control 156L, 115V includes: - 2 x Stainless Steel Perforarated Shelf - Water Tank - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

Demo device. Unused & in original packaging. 2022 model. Great condition. 6 months warranty. Technic (more)al specifications: - External dimensions (WxDxH): 780 x 970 x 945 mm - Internal dimensions (WxDxH): 607 x 670 x 629 mm - Internal volume: 255 l (usable: 162 l) - Rack dimensions: 560 x 500 mm (capacity: 12 pcs., scope of delivery: 3 pcs.) - Max. weight load per rack: 10 kg - Max. weight load per device: 30 kg - Device weight: 97.5 kg - Adjustable temperature: +3 °C - 55 °C - Ambient temperature: +18 °C - +34 °C - Temperature deviation: +/- 0.1 °C

This item has just arrived in our stock. Please enquire for further details.

KNF LABOPORT N 840 G Diaphragm Pump Ultimate Vacuum 6 mbar Maximum Flow Rate 34L/min (2.04 m3/h) Pr (more)otection Class IP30 Features - Adjustable speed control - ATEX compliant to (Ex) II 2/-G IIB+H2 T3 internal atmosphere only - Ideal for extremely aggressive/corrosive gases and vapors - Chemically-resistant PTFE/FFPM flowpath - Clean, 100% oil-free operation - Compact, quiet and reliable - Maintenance-free - Small footprint to optimize workspace The KNF LABOPORT N 840 G Diaphragm Pump is a chemically resistant, compact and oil-free diaphragm vacuum pump with manual speed control for adjusting the pump capacity to your specific application. It features a gas ballast, PTFE/TFM heads, PTFE-coated diaphragms and FFPM valves. Suitable for a wide range of Laboratory applications including extremely aggressive/corrosive gasses and vapors. INCLUDED: The KNF LABOPORT N 840 G Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Varioshake shakers The silent LAUDA shakers are available in a large number of variations and shake  (more)each sample evenly, such as 15ml and 50ml tubes, Erlenmeyer flasks and containers. They can be used for a large number of purposes, thanks to a wide range of accessories. Areas of application: - Biology and microbiology - Medical diagnostics - Analytical laboratories - Test institutes, universities and research facilities - Quality Assurance Laboratories Reliable and durable with new LAUDA design The shakers are the laboratory's trusty 'workhorse'. LAUDA agitators are produced with 'GFL technology' and are synonymous with the highest quality, reliability and durability. Their robust, low-wear mechanical system ensures extremely smooth operation and reliable continuous service. Furthermore, thanks to the new LAUDA design, the shakers adapt to any laboratory environment, thanks to their small footprint and are extremely easy to use. Control panel: analog or digital The LAUDA Varioshake VS 8 OE and BE, with analog rotary controllers, allow adjustment of speed and operating time. Digitally controlled agitators provide an extended timer range, start / stop function and provide the ability to save the latest operating parameters. Shaker tray, test tube holder, Erlenmeyer flask clamp easy to install in seconds. All available as an accessory. Turn on, set the shaking frequency, set the running time, done. Highest quality materials: daily use for years without problems.

Four load cell stainless steel platforms The frame for recessing (foundation) is part of the set &nd (more)ash; you will receive it with the ordered platform.

Carousel and loading stand for 1 pipette SARTORIUS 730981 New equipment in its original box For one  (more)pipette For use with PICUS and eLINE mechanical and electronic pipettes