Tuttnauer Benchtop Autoclave Steam Sterilizer 3850EL-D Lab

This listing is for a refurbished Laboklav 55M Autoclave Incl. commissioning in UK. (outside the UK (more) is possible also, please request and we will try and accomodate) Vertical device, 55l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 765 x 600 chamber dimensions (Ø x d in mm) 410 x 460 Steam generator 3,3kW Fast re-cooling with double jacket 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

Autoclave Engineers Model 300mL EZ Seal w/ Control Tower Lab This system was removed from a universi (more)ty where it was surplus to requirements. Both units are in good cosmetic condition, however, they have not been tested beyond that due to the system being a visual PAT fail, it is being sold for Spares or Repair. Includes the following; 1x Autoclave Engineers unitModel: E010HM0210C112B200121E2101 1x Control towerModel: C1211224300010C

Astell ASB270BT16963 Autoclave Front Loading Floor Standing Autoclave This was removed from a univer (more)sity lab where it was surplus to requirements. The unit does power up, but the lab reported that it had a vacuum fault. It has not been tested at our facility. It requires a 5 Pin 32amp plug. It is in reasonably good cosmetic condition with minor marks. It is sold for spares/repairs.

BIOBASE BKQ-350SD-B large horizontal autoclave. Double door. Built-in steam generator. Capacity: 352 (more)L. Loading by car and trolley (included). Nine preset sterilization cycles, two test cycles and one auxiliary cycle: textile material at 121 ºC and 134 ºC, instruments at 121 ºC and 134 ºC, liquids at 121 ºC, plastic material at 121 ºC, glass and other solids at 121 ºC , Bowie-Dick test; leak test and program to be defined by the user. Camera and stainless steel cover. Automatic door closing. Illuminated indicators for door closing, running and end of cycle. Lifespan of about 10 years (20,000 cycles). Meets GMP requirements, CE marked. Water purification system, compressor and installation not included. Optional baskets and data-logging system. Camera size: 600 * 600 * 980mm. External size: 1286 * 1848 * 1240mm. Power consumption: 24Kw. Power supply: 380V, 50Hz.

Scilogex MicroPette Plus 8-Channel Autoclavable Pipettor, 50-300μlThe MicroPette Plus pipettes are f (more)ully autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 8-Channel Autoclavable Pipettor, 50-300μl includes: - Two Year Manufacturer's Warranty

Scilogex MicroPette Plus 8-Channel Autoclavable Pipettor, 5-50μlThe MicroPette Plus pipettes are ful (more)ly autoclavable, enable easy cleaning and reduce the risk of contamination. Steam autoclaving can be performed at 121°C, 1 bar for 20 minutes. After autoclaving, the pipette must be cooled down and left to dry for 12 hours before use. It is recommended to check the performance of the pipette after each autoclaving. Greasing and sealing of the pipette piston after every 10th autoclaving will secure an enhanced function.CalibrationAll SCILOGEX pipettes have been quality tested according to ISO8655-2:2002 and are supplied with individual calibration certificates. The quality control includes gravimetric testing of each pipette with distilled water at 22°C.Product Features - Lightweight and ergonomic design - Fully autoclavable - Clear digital display - Staggered tip ejector for easy tip ejection - Head rotates 360° for user comfort. - Easy to calibrate with tool supplied. - Used with 'universal' pipette tips. - Dispensing head rotates for effortless pipetting convenience. - Individual piston and tip cone assembly allow for easy repair and maintenance - Compound material-made tip cone secures high sealing performance - Compatible with most universal tip brands INCLUDED: The Scilogex MicroPette Plus 8-Channel Autoclavable Pipettor, 5-50μl includes: - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MORE DETAILS TO FOLLOW

Hermle 4 x 500ml Angle Rotor for Z446/K and Z496 Centrifuges The Hermle 4 x 500ml Angle Rotor for Z4 (more)46/K and Z496 Centrifuges features a maximum speed of 8,000 RPM and a maximum RCF of 10,367 x g. This rotor is designed for use with the Hermle Z446 and Z496 Series. INCLUDED: The Hermle 4 x 500ml Angle Rotor for Z446/K and Z496 Centrifuges includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty