Scilogex SuperPette Autoclavable Pipettor, 2-20μl

Autoclave Engineers Model 300mL EZ Seal w/ Control Tower Lab This system was removed from a universi (more)ty where it was surplus to requirements. Both units are in good cosmetic condition, however, they have not been tested beyond that due to the system being a visual PAT fail, it is being sold for Spares or Repair. Includes the following; 1x Autoclave Engineers unitModel: E010HM0210C112B200121E2101 1x Control towerModel: C1211224300010C

Priorclave PS/QUA/EH320 Front Loading Steam Autoclave This was removed from a university lab where  (more)it was surplus to requirements. The unit powers up but appears to have a main board fault. It is sold for spares/repairs.

Scilogex SuperPette Autoclavable Pipettor, 0.5-10μlThe new SCILOGEX SuperPette fully autoclavable di (more)gital pipettors have an excellent ergonomic and ultralight design providing effortless, ergonomic, accurate and precise pipetting experience. In addition, the volume lock helps protect from accidental volume change. The clear digital display is centrally located, for the left- and right-handed users. UV and chemical resistant.Product Features - One handed volume adjustment and volume lock - Autoclavable, digital, ergonomic, ultralight, and accurate - UV and chemical resistant - Display is centrally located, for ambidextrous use. - Compatible with universal pipette tips of up to 1000 mL - Built with a calibration tool, so your lab can save time and cost by maintaining the pipettor in-house - Suitable for forward or reverse pipetting Click Here to View Product Video INCLUDED: The Scilogex SuperPette Autoclavable Pipettor, 0.5-10μl includes: - Two Year Manufacturer's Warranty

Benchmark BactiZapper Tilt XL, Microsterilizer with 35mm Chamber & Adjustable Tilt The BactiZapp (more)er™ TILT Series utilizes the same well-proven technology of our original Bacti-Zapper Classic, but with a unique, adjustable head angle that allows for more convenient sterilization. When loosened, the adjustment knob can be shifted upward or downward, resulting in a tilt angle range of 55°C. INCLUDED: The Benchmark BactiZapper Tilt XL, Microsterilizer with 35mm Chamber & Adjustable Tilt includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

IKA ROTAVISC lo-vi HELI Complete Viscometer Speed Range 0.01 - 200 rpm Setting Accuracy Speed 0.01  (more)±rpm Time Setting Range 0.017 - 6000 min Features - Measures low-viscosity liquids in various settings, from labs to quality control. - Includes spindle set, protective bracket, temperature sensor, and HELISTAND with T-spindle. - 4.3″ TFT display for intuitive menu navigation and digital spirit level for setup. - Accuracy: +/- 1% deviation and +/- 0.2% reproducibility for diverse fluids. - Offers stepless speed adjustment for enhanced measurement versatility. - Motorized HELISTAND for dynamic, precise viscosity measurement. *Similar Model Depicted Regardless of a simple or demanding viscosity measurement - IKA ROTAVISC lo-vi HELI Complete determines the viscosity of low-viscosity liquids in all areas of application ranging from the laboratory to quality control. The scope of delivery includes a standard spindle set (SP 1-SP 4), a protective bracket, temperature sensor and HELISTAND stand incl. T-spindle set. The generous 4.3″ TFT display allows for an intuitive menuguidance. A digital spirit level also supports the correct set-up of thestart-up condition. The simple ramp function simplifies repetitive tasks. Thelevel of measurement accuracy of the ROTAVISC rotational viscometer for bothNewtonian and non-Newtonian fluids is +/- 1 % of the measuring range. Thereproducibility is +/- 0.2 %. ROTAVISC is a viscometer, which offers steplessspeed adjustment. The motorized IKA HELISTAND moves the mounted viscometer andits rotating body slowly and uniformly up and down in the sample. Viscositymeasuring range: 15 - 6.000.000 mPas. Click Here to View Product Video INCLUDED: The IKA ROTAVISC lo-vi HELI Complete Viscometer includes: - Standard Spindle Set - Protective Bracket - Temperature Sensor - HELISTAND - T-Spindle Set - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Kratos Analytical Axima-CFR Plus MALDI TOF Mass Spectrometer This was removed from a university lab  (more)where it was surplus to requirements. The unit powers up, but we were unable to test it further at our facility. The lab confirmed it was working before it was replaced but the camera had stopped working making alignment difficult. It is in excellent cosmetic condition with only minor marks. Includes a PC with the following software installed:MALDI-MS Application Ver: 2.8.4 Monitor, Keyboard & Mouse included.

Yamato WG-301UVUFB Auto Pure Benchtop Type 1 Water Purification System with UV and UF, 120V Configur (more)ation Benchtop Flow Rate (Typical) 2.5L/min (0.67 gpm) Resistivity 18.2 MΩ-cm Features - 2.5 LPM of 18 MΩ Type 1 reagent water on demand - Low-cost of ownership - Intuitive, user-friendly touch screen interface - Large capacity, low cost consumable cartridges - Replacement cartridges are fresh and made in the USA with a 1 year shelf life - Compact design - Real time quality monitoring with leak detection - Quick change, cartridge – no tools needed - Premium quality ion exchange resin Compact design, benchtop or wall mount water purification system in 120V with UV oxidation lamp and ultrafiltration. It produces Type 1 deionized water. Low cost of ownership. Water is purified using a staged purification process which includes high-purity ion exchange resins to remove dissolved minerals, ultraviolet light for bacteria sterilization and TOC reduction, and ultrafiltration for pyrogen removal and nuclease free water. As water exits the system, a final filter removes particulates and bacteria to reach Type 1 water specifications. INCLUDED: The Yamato WG-301UVUFB Auto Pure Benchtop Type 1 Water Purification System with UV and UF, 120V includes: - Drain fitting – ¼ MNPT x HB - 6 Feet of 3/8” OD Tube for Inlet - 6 Feet of 3/8” Hose for Drain Connection - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

IKA Tube Mill control Disposable Chamber Grinding System Motor Rating Input 100 W Speed Range 5000  (more)- 25000 rpm Feed Hardness Max 5 Mohs Features - The IKA Tube Mill control features a patented disposable grinding chamber, eliminating cross-contamination and cleaning efforts. - Transparent chamber allows observation of grinding tests; suitable for hard, dry, and brittle materials like seeds. - Emphasis on security with error messages for improper chamber insertion and secure drive unit. - Features multilingual OLED display, adjustable timer, USB interface, interval operation, and variable speed from 5000 to 25000 rpm. - Various operating modes, adjustable safety settings, and programmable test conditions ensure reproducible results. - Includes two grinding chambers (MT 40.10 and MMT 40.1), touch keypad for easy operation, and dust-proof sealed housing for quiet operation. Tube Mill controlThe world’s first patented Tube Mill control is a batch mill with disposable grinding chamber. Eliminates possibility of cross-contamination and the effort of cleaning. The grinding chamber and cover are made of a transparent material so grinding tests can be observed at any time. The mill can be used for hard (Mohs hardness up to 5), dry and brittle materials. It is especially suitable for grinding seeds, such as corn and wheat. During development of the mill, particular emphasis was placed on security. The mill will only start when the hood is closed. When the grinding chamber is not inserted properly or not closed properly, the drive unit will display an error message and the drive will not start. During operation, the grinding chamber cannot be opened. The drive and the grinding chambers are secured with a labyrinth seal. No dust can escape from the chamber or penetrate the drive.Clearly arranged, multilingual OLED-displayTimer, adjustable from 5 s to 3 minUSB interface for control and documentation of all the parametersInterval operation availableInfinitely variable speed from 5000 to 25000 rpmVarious operating modesAdjustable safety speedAdjustable safety timeProgrammable and storable test conditionsError Code DisplayReproducible test resultsEasy operation with touch keypadDust proof sealed housingQuiet operationScope of delivery includes two grinding chambers: 1 x MT 40.10, 1 x MMT 40.1INCLUDED: The IKA Tube Mill control Disposable Chamber Grinding System includes: - Power Cord - One Year Manufacturer's Warranty