Yamato SK-102C Compact Sterilizer 18L, 115V

Hirayama HICLAVE HV-110II Floor-Standing Touchscreen Autoclave, 110L, 208/220/240V Chamber Volume 1 (more)10L Sterilization Temperature Range 105°C to 135°C Chamber Dimensions (Dia. x H) 16.5 x 31 in (42 x 79.5 cm) Features - Space-saving design with upward lid opening - Five operation modes with up to 8 memory settings per mode - Color touch panel for intuitive operation - Electro-mechanical lid lock system with one-touch lever - Dual interlock mechanism for enhanced lid safety - Programmable auto-start function, up to 1 week in advance - Digital and analog displays for temperature and pressure monitoring - Air removal system with dual detection for consistent sterilization - 11 alarms, including low water heating and over-temperature, with alarm history display - Memory backup system retains settings during power failures The Hirayama HICLAVE HV-110II Floor-Standing Touchscreen Autoclave, 110L, 208/220/240V, is designed to handle high-capacity sterilization with precision and reliability. Featuring a spacious 110L chamber, it operates with five modes—LIQUID, SOLID, WASTE, AGAR, and DISSOLUTION—each supporting up to 8 programmable memory settings. The autoclave's intuitive color touch panel and space-saving upward lid opening ensure ease of use, while the electro-mechanical lid lock with a one-touch lever and dual interlock mechanism provide enhanced safety. Its versatile temperature ranges and programmable auto-start function allow flexibility, enabling cycles to be scheduled up to a week in advance. The HV-110II is equipped with a dual air removal system that detects and eliminates residual air during both gravity displacement and pressure exhaust phases, ensuring consistent sterilization for even the most challenging loads. Real-time monitoring is facilitated by digital and analog displays for temperature and pressure, while safety is reinforced through 11 alarms and a robust memory backup system to retain settings during power failures. Built with a durable stainless steel (SUS304) chamber and supporting high-pressure operations, this autoclave is a dependable solution for laboratories requiring reliable and efficient sterilization at scale.INCLUDED: The Hirayama HICLAVE HV-110II Floor-Standing Touchscreen Autoclave, 110L, 208/220/240V includes: - Bottom Plate - Drainage Hose - Exhaust Hose - Exhaust Bottle - Drain Bottle - 2 x Caster Stopper - 2 x Round Wire Mesh Basket - Power Cord - Operator's Guide - Manufacturer's Documentaiton - 1 Year Manufacturer's Warranty

Priorclave  EV100 Top-Loader Autoclave This was removed from a university lab where it was surp (more)lus to requirements. The unit has been professionally serviced and is in full working order. A full report is available on request. It is in good cosmetic condition with minor marks.

LTE Touch-Clave K150e Autoclave Lab This system comes from an operational lab, where it is now surpl (more)us to requirements. The client has confirmed it was in full working order when last used. Includes full service history with the most recent visit in 2022. Further information regarding the item is available on request. This system is available for collection from Falkirk, Scotland. The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Tuttnauer 3850EP Digital Autoclave, 230V Chamber Volume 65L Sterilization Temperature Range 105°C t (more)o 137°C Chamber Dimensions 15 x 20 in. (38.1 x 50.8 cm) Features - Designed to autoclave wrapped, unwrapped, glass and tools. - Not suitable for liquids - Sterilization time up to 99 minutes - Temperature selection from 105°C to 137°C - Includes trays - In-line particle filter to protect valves - Electronic pressure and temperature sensors - Low Water Alarm - sounds when reservoir needs to be refilled - Standby Heating - keeps chamber warm for quicker cycles - Built-In Printer - Provides a printed summary at the end of each cycle, documenting temperature, elapsed sterilization and drying time, selected cycle number, real time and date, as well as any errors or interruptions that may occur during the cycle - Chamber Volume – 65L - Power – 230V, 1 Phase (60Hz) NEMA 6-15 The Tuttnauer 3850EP Digital Autoclave, 230V is designed with superior productivity in mind, offering monitoring, recovery, standard printing and a wide range of programmable and customizable options for large capacity operation. An easy-to-use, single touch control system increases productivity and rapid cycles optimize availability of ready-to-use sterile instruments. The long-life electro polished chamber and door are also made to last. Click Here to View Product Video INCLUDED: The Tuttnauer 3850EP Digital Autoclave, 230V includes: - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

Scilogex SuperPette Autoclavable Pipettor, 20-200ulThe new SCILOGEX SuperPette fully autoclavable di (more)gital pipettors have an excellent ergonomic and ultralight design providing effortless, ergonomic, accurate and precise pipetting experience. In addition, the volume lock helps protect from accidental volume change. The clear digital display is centrally located, for the left- and right-handed users. UV and chemical resistant.Product Features - One handed volume adjustment and volume lock - Autoclavable, digital, ergonomic, ultralight, and accurate - UV and chemical resistant - Display is centrally located, for ambidextrous use. - Compatible with universal pipette tips of up to 1000 mL - Built with a calibration tool, so your lab can save time and cost by maintaining the pipettor in-house - Suitable for forward or reverse pipetting Click Here to View Product Video INCLUDED: The Scilogex SuperPette Autoclavable Pipettor, 20-200ul includes: - Two Year Manufacturer's Warranty

Manufacturer: Eppendorf     Model: 5702 + swing-out A-4-38 rotor Description: The Eppendorf 5702 Cen (more)trifuge is a powerful laboratory centrifuge for the separation of various samples. With its compact design and a maximum speed of 4,400 RPM (revolutions per minute), this centrifuge is ideal for a variety of applications in research, clinical and industrial laboratories. The Eppendorf 5702 Centrifuge has a rotor with a capacity of 4 x 100 mL or 30 x 1.5/2 mL tubes, allowing flexibility for a wide range of sample sizes. The centrifuge also features an intuitive control panel with a user-friendly interface for easy operation and a variety of programmable functions for customised runs. Key features: - Very compact footprint that fits on any lab bench - Low step-in height for easy loading and unloading of samples - "At set RPM" function starts the timer when the selected speed is reached for reproducible centrifugation runs - Stainless steel housing and pipette holder ensure stability and durability Technical data: Max. Max. speed: 3,000 x g (4,400 rpm) Dimensions (W x D x H): 32 x 40 x 24 cm Weight: 20 kg Eppendorf oscillating bucket rotor: A-4-38 Maximum speed: 4400 rpm / max 4x400g The device/system offered here has been tested and is fully functional and ready for use.

Temperature range: 0°C to ambient Temperature can be set individually per compartment Dimensions (Hx (more)WxD): 2000 x 765 x 855 mm Internal dimensions compartments (HxBxD): 600 x 530 x 630 mm

This Biotage Jones Chromatography Flashmaster II System was removed from a university lab where it w (more)as surplus to requirements. The unit powers on and is in very good cosmetic condition. It has not been tested further at our facility. There is some chipped paint along the top of the unit and scuffs and scratches from general use.

A&D Weighing Phoenix GH-252 Semi-Micro Dual Range Analytical Balance, 101/250 g, 0.01/0.1 mg Cap (more)acity 101 g / 250 g Readability 0.01 mg / 0.1 mg Repeatability 0.03 mg / 0.1 mg Features - Delivers ultra-precise readability of 0.01 mg / 0.1 mg with repeatability of 0.03 mg / 0.1 mg for consistent accuracy - OES technology offers high performance and a wider range of models with reliable accuracy & precision - Adjustable environmental (manual or automatic) response characteristics to help cope with the effect of drafts and vibrations - Automatic self calibration to maintain accuracy under temperature changes - Save time with one-touch Full Digital Calibration FDC (Internal or External). Makes calibration simple to perform within seconds - Easy to clean and operate with anti-static glass breeze break and SS steal pan, spill proof ring and base plate - Advance stabilization bandwidth allows for fast response times - Auto power on ensures ready-to-use and optimal performance every time, reducing warm up/wait time - Balance ID and Clock/Calendar function allows for time & date stamps and GLP reports - Data memory plus the ability to export through bidirectional RS-232C or optional USB, Bluetooth & Ethernet - Underhook capability for density measurement and weighing of large or magnetic materials The A&D Weighing Phoenix GH-252 Semi-Micro Dual Range Analytical Balance, 101/250 g, 0.01/0.1 mg, brings precision and reliability to the lab with advanced features tailored for demanding applications. Leveraging high-performance OES technology, this model ensures exceptional accuracy across a wide range of tasks, and its adjustable environmental response characteristics help counteract the effects of drafts and vibrations, creating a stable weighing environment. Built for ease of use and durability, the GH-252 features an anti-static glass breeze break, a stainless steel weighing pan, and a spill-proof ring—all of which streamline maintenance and extend the unit's operational life. With a semi-micro precision level, it delivers ultra-fine readability of 0.01 mg in its lower range and 0.1 mg in its upper range, making it highly suitable for applications demanding meticulous accuracy. Engineered to save time and increase productivity, the GH-252 includes automatic self-calibration to uphold measurement accuracy even with temperature shifts. The one-touch Full Digital Calibration (FDC) function allows quick and straightforward calibration within seconds, whether using internal or external calibration. Fast stabilization times and a repeatability of 0.03 mg in the lower range ensure that precise readings are available with minimal waiting, supporting smooth workflows in fast-paced lab settings. For comprehensive data management, the Phoenix GH-252 features a balance ID, a clock/calendar function for time-stamped GLP reporting, and extensive data memory capabilities. Connectivity options include standard RS-232C, with additional choices for USB, Bluetooth, and Ethernet to meet diverse data-sharing requirements. Designed with flexibility, this balance also includes underhook weighing for density measurements and supports multiple measurement units, making it an invaluable tool for labs requiring high-precision and adaptable weighing solutions. Supported by a comprehensive 5-year warranty, it ensures long-term reliability and peace of mind for all your precision weighing needs. INCLUDED: The A&D Weighing Phoenix GH-252 Semi-Micro Dual Range Analytical Balance, 101/250 g, 0.01/0.1 mg includes: - Anti-Static Glass Breeze Break - Weighing Pan - Pan Support - Fine Range Breeze Break Ring - Dust Plate - Floor Plate - Terminal Cover - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.