Hirayama HICLAVE HV-50II Floor-Standing Touchscreen Autoclave, 50L, 120V

This listing is for a refurbished Laboklav 25MV Autoclave Incl. commissioning in UK. (outside the U (more)K is possible also, please request and we will try and accomodate) Horizontal device, 25l, glass lid Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 440 x 540 x 660 Chamber dimensions (Ø x d in mm) 265 x 465 Steam generator 2kW Fast re-cooling by air Vacuum incl. pre- and postvacuum, heating during post vacuum 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status.  Test runs to ensure and check functionality

This autoclave was removed from a university lab as surplus to requirements. We were assured the uni (more)t was in good working order when last used, but was no longer required by the lab. At our site, we do not have a steam supply to test the unit and we have not been able to get it serviced. It must be safety inspected and tested upon receipt before it can be used. Type:B-QCS-54260To:BS.2646Capacity:200Maxpressure:25Serial No:2845Date:9-1-06Litres:2006Test Pressure:394Max Filling mass:100kgIntended use:SteriliseProduct group:2Design temp:150 degrees cMax Temp: 138 degrees cMin Temp: N/AVoltage: V00 50/60 8KW

This Tuttnauer Autoclave 5050ELV-D Steriliser was removed from a university lab where it was surplus (more) to requirements. The system has been stripped for parts and is sold for spares/repairs.

This item has just arrived in our stock. Please enquire for further details.

Tuttnauer 023212007 Autoclave Printer for 2340E, 2540E & 3870E The Tuttnauer 023212007 Autoclave (more) Printer is specifically designed for use with the Tuttnauer 2340E, 2540E, and 3870E Autoclave models. This reliable printer provides accurate and detailed documentation of sterilization cycles. Please Note: This printer replaces the discontinued 023212005 printer model shown in the second image and must use the 023212201 printer paper. INCLUDED: The Tuttnauer 023212007 Autoclave Printer for 2340E, 2540E & 3870E includes: - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Tuttnauer vertical laboratory autoclaves are top loading autoclaves. ELV models have an advanced mic (more)roprocessor control panel and chamber made of 316L stainless steel. Tuttnauer laboratory autoclaves have been designed to provide high quality repeatable performance and accountability for a wide range of applications used in modern laboratories. Vertical lab autoclaves are designed for your convenience and ease of use when vertically loading the autoclave. Chamber Dimensions (ØxD): 280 x 460 mm Chamber Volume: 31 L External Dimensions (WxHxD): 540 x 980 x 440 mm For programs see images

New generation! The OHAUS Scout Scale, with its large backlit LCD display and integrated educational (more) software is the ideal tool for use in the classroom. Offering world-class overload protection, fast stabilization times, increased capacity, more connection options, and a stackable design—the ultimate educational weighing experience. - Excellent overload protection and practical stackable design - Backlit LCD display and 4-button operation: very easy to use in all conditions - High weighing speed and high resolution display The OHAUS Scout scale can be equipped with various connectivity options: RS232, USB, USB device, Ethernet or Bluetooth®. These options ensure a more modern and smarter student experience, increasing accuracy and efficiency. Other Standard Features and Equipment Transport lock, stainless steel weighing pan, menu and adjustment lockout switch, software and mechanical overload/underload protection, stability indicator, auto tare, low battery indicator, auto power off user selectable print options and communication settings. Applications Weighing: allows you to calculate the weight of the samples in the selected unit of measure. Density determination: calculation of the density of solids or liquids. With the built-in weigh below hook, you can test for the specific gravity of objects that cannot be placed on the weighing pan. Molar Concentration: Calculate the mass of a sample and automatically convert to the molar concentration. MODELS AVAILABLE: Applications Weighing, determination of density, weighing of moles Screen Liquid crystal display (LCD) with backlight Operation AC adapter (included) or 4 AA batteries (not included) Communication RS232, USB host, USB device, Ethernet or Bluetooth™ (available as an accessory) Construction ABS housing, stainless steel bowl, ABS draft shield (1 mg model only), bottom weigh hook, transport lock, manual calibration lock switch, security slot Project features Stability indicator, stackable design with storage lid included (excluding 1 mg model), mechanical and software over/underload protection, low battery indicator, auto power off, auto tare, span calibration mass included in models with capacity up to 620 g NO MORE BROKEN SCALES! The excellent overload protection of the Scout balance consists of a weighing pan made of high-strength stainless steel and a pan support made of impact-resistant plastic. The system allows the balance to safely support loads up to 10 times its rated capacity, withstanding use in even the most demanding educational environments. In addition, the integrated transport lock protects the load cell from damage during transport, stacking and storage.

Orbit Marine AL-7100-SDU-MK2 Servo Driver Unit This was removed from a university lab where it was  (more)surplus to requirements. It is in good cosmetic condition but has not been tested at our facility.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

F1 Mass Standard - knob weights, wooden box. Nominal value - 2000 kg.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Heidolph Reax 2000 mixer. Speed 200-2400 l/min. Heidolph Reax 2000 vortex is a high-quality laborato (more)ry equipment that provides fast and efficient agitation for liquid samples in test tubes or vials. With an adjustable stirring speed and compact design, this stirrer is ideal for homogeneously mixing liquids in molecular biology, biochemistry and chemistry applications. Additionally, its quiet operation and non-slip platform make it a reliable and safe tool for any laboratory.