Jasco 821-FP Intelligent Spectrofluorometer Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

KNF LAB Laboport SH810 Chemically-resistant Vacuum System Lab This item was removed from a universit (more)y where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This system features the following:- The system includes a 250ml separator flask on the input side.- A Shott Duran 250ml round bottom flask is included on the condenser side.- The 5-ported condenser coil is 31cm in total length and has a diameter of 6cm.

Minebea Intec Combics 2 Explosion Proof Scale Model CAW2S1-30ED-I Lab This item was removed from a u (more)niversity where it was surplus to requirement. It is in good cosmetic condition and in working order. (The test calibration weight is not included.)

Labotect C200 CO2 incubator for in vitro fertilisation (IVF). Capacity 200 litres. Temperature range (more). 27ºC - 47ºC. Stability / uniformity ±0.1 °C /  0.3 °C. Door camera and heated. Range CO2 0 - 10%. Sensor CO2 inflarrojo double beam. Minimal contamination. Active sterile humidity. Glass door, internal subdivided in 6 sections. Shelves adjustable. Over-temperature alarm 32-47 °C. Includes outer container to supply humidity, sterile. Manual. Specifications 230V , 50/60 Hz Device with medical acceptance Interior made of polished stainless steel Intelligent system of temperature control for the inner drying of the chamber. CO2 Sensor -Sensor inflarrojo dual beam -Accurate measurement -Recovery time very short -Long-term stability Direct heating. -Distribution of the homogeneous temperature in the interior -Recovery time very short Diagnostic system -Acoustic alarm and optical -Monitoring of the door -Remote alarm

The series of standard electromagnetic modules of high resolution, MAS.1, is intended for integratio (more)n into customer’s weighing systems. The high resolution MAS.1 module operates on the basis of electromagnetic force converter. Thanks to its compact design and integrated electronics the module can be both adapted into technological lines and installed inside customers' devices. By cause of high measurement accuracy, it is recommended to install the module inside customer's instrument (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MAS.1 module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 mg, Overload protection, Ease of adaptation to the required storage space,, Internal adjustment, Various options of hardware configuration.

This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and i (more)s ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

This listing is for 1 of 6 Stuart SB301 Magnetic Stirrer. The unit is in full working condition and (more) is ready for immediate release. The Stuart SB301 Magnetic Stirrer is a heavy-duty device designed for mixing solids in liquids. It features a stainless steel plate with a dimensions of 300mm x 300mm, making it suitable for use with vessels up to 30 liters in capacity. Key Specifications Speed range: 100 to 600 rpm Maximum stirring capacity: 30 liters Plate material: Stainless steel Overall dimensions: 328mm x 369mm x 103mm Net weight: 5 kg Electricity supply: 230V, 50Hz, 50W

IKA VACSTAR Lite Vacuum Pump Final Pressure Without Gas Ballast 9 mbar Pump Rate Max. (50/60Hz) 16.6 (more)7 l/min Input Pressure 10 to 1,030 mbar Features - Speed-controlled, 2-cylinder vacuum pump for universal dry and oil-free vacuum applications - Chemically resistant membranes with ultimate vacuum pressure of 9 mbar - Compact design saves bench space and allows placement behind other lab equipment - Seamless communication with vacuum controllers and circulators for synchronized processes - Integrated valve cleaning function extends system life and reduces maintenance costs - Quiet operation with a noise level of 54 dB(A) for a more comfortable lab environment - USB-C interface and analog input for enhanced connectivity and control - Lightweight and durable with aluminum-cast and thermoplastic polymer housing - Recommended use of the VSE 1 emission condenser for safety and clean ambient air The VACSTAR lite is a versatile, speed-controlled, 2-cylinder vacuum pump designed for universal dry and oil-free vacuum applications. Featuring chemically resistant membranes and an ultimate vacuum pressure of 9 mbar, it is well-suited for a wide range of laboratory tasks. Whether used with rotary evaporators, laboratory reactors, temperature chambers, centrifuges, or classic Schlenk lines and filtration systems, the VACSTAR lite delivers high operating efficiency and flexibility. Its robust construction ensures long-term reliability with minimal maintenance, making it an indispensable tool for standard laboratory workflows. Compact and thoughtfully designed, the VACSTAR lite fits easily behind other lab equipment, optimizing bench space while remaining accessible. Seamless integration with devices like vacuum controllers and circulators enables synchronized operations, enhancing process control and system performance. When paired with the VC 10 lite vacuum controller, the pump benefits from an integrated valve cleaning function that removes solvent residues, extending the vacuum system's lifespan while minimizing maintenance costs. For added safety and environmental protection, the optional VSE 1 emission condenser effectively captures escaping solvent vapors, maintaining clean air and safeguarding users.INCLUDED: The IKA VACSTAR Lite Vacuum Pump includes: - Vacuum Hose, 1m - Silencer - Connecting Cable - Warranty Card - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

MARSHALL Select MS-OS200 Orbital Shaker, 40-200 RPM Speed Range 40 to 200 RPM Platform Size (W x D) (more) 10.6 x 10.6 in. (26.8 x 26.8 cm) Maximum Load 4.4 lb. (2 kg) Features - Orbital shaking motion with a 20 mm orbit size for smooth, uniform mixing - Features dual LED displays for independent time and speed monitoring - Equipped with a timer adjustable from 1 minute to 99 hours and 59 minutes or continuous operation - Includes straps to securely hold culture flasks and tubes - Powered by a maintenance-free brushless DC motor for reliable performance - Compact design maximizes workspace efficiency - Over-speed detection and protection for enhanced safety - IP21 protection class ensures safe operation in challenging environments - Low vibration operation maintains sample integrity during mixing - Stable, low-profile construction reduces risk of spills and enhances usability The MARSHALL Select MS-OS200 Orbital Shaker offers a robust solution for a variety of laboratory mixing tasks, featuring a speed range of 40 to 200 RPM and an orbital shaking motion with a 20 mm orbit size to ensure smooth and uniform results. This shaker is equipped with a brushless DC motor, promoting maintenance-free operation while minimizing noise and vibration, thereby enhancing the stability and longevity of the device. Its dual LED displays provide clear, independent readouts of time and speed, with a comprehensive timer function that allows settings from 1 minute up to 99 hours and 59 minutes, including options for both continuous and timed operation. The shaker's compact design includes a platform size of 10.6 x 10.6 inches (26.8 x 26.8 cm), which accommodates an anti-slip surface ideal for holding culture flasks and securing tubes with straps, ensuring safety and efficiency during operation. With a maximum load capacity of 4.4 lb. (2 kg) and an IP21 protection class rating, it is well-suited to handle sensitive and rigorous shaking tasks. Additional safety features include over-speed detection and protection mechanisms that safeguard against operational errors. The MARSHALL Select MS-OS200 is an indispensable tool for any lab requiring reliable, precise, and safe mixing capabilities. INCLUDED: The MARSHALL Select MS-OS200 Orbital Shaker, 40-200 RPM includes: - Securing Straps - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf FA-45-48-11 Fixed Angle Rotor, Cat. #: 5427754008 The Eppendorf FA-45-48-11 Fixed Angle Ro (more)tor, Cat. #: 5427754008, is a centrifuge rotor designed for use with the Eppendorf 5430/R Series centrifuges. This rotor has a maximum speed of 12,700 RPM and a maximum relative centrifugal force (RCF) of 18,210 x g. It can accommodate a maximum capacity of up to 48 × 1.5/2.0 mL tubes, making it suitable for a wide variety of applications. INCLUDED: The Eppendorf FA-45-48-11 Fixed Angle Rotor, Cat. #: 5427754008 includes: - Eppendorf FA-45-48-11 Fixed Angle Rotor - Aerosol-tight Lid - Full 1 Year Parts and Labor Warranty Eppendorf FA-45-48-11 Fixed Angle Rotor, Cat. #: 5427754008 SpecificationsMaximum Speed12,700 RPMMaximum RCF18,210 x gMaximum Capacity48 × 1.5/2.0 mL tubesMax. Radius10.1 cmMin. Radius8.9 cmCentrifuge CompatibilityEppendorf 5430/R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Benchmark TubeRoller with 5 Rollers Speed Fixed 38 RPM Tilt Angle ±5° Motion Simultaneous roll an (more)d tilt Features - Constant speed: Fixed at 38 RPM. - Tilt angle: ±5° for thorough mixing. - Simultaneous roll and tilt motion. - Accommodates 8mm to 200mm diameter vessels. - Dimensions: 18 x 7 x 3.5 in (45 x 18 x 9 cm). - Roller dimensions: 12 x 12.5 in (30.5 x 32 cm). - Optimal for Vacutainers, bottles, and tubes. Your browser does not support the video tag. Benchmark TubeRollers are designed for the gentle, thorough mixing of a variety of containers, including Vacutainers, bottles, test tubes, centrifuge tubes and roller bottles. This TubeRoller operates at a constant 38rpm, chosen as the optimum speed for the broadest range of mixing requirements. As the roller mechanism rotates through each complete revolution, the right side of each roller is gently elevated about 0.5 in (13mm) and returns to the horizontal starting position. This additional, gentle up/down motion provides a “wave” effect and guarantees that the entire sample is subjected to complete, thorough mixing, end to end. This built in tilt feature provides a level of homogeneous mixing uniformity that can not be matched by any stationary roller apparatus. From blood collection tubes to roller bottles, Benchmark TubeRollers are the ideal choice for research, clinical laboratories and doctors’ offices.INCLUDED: The Benchmark TubeRoller with 5 Rollers includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty