Labotect C 200

PHARMACIA DIAGNISTICS AB UNICAP100 V1 laboratory analyzer for parts Model: UNICAP 100 Without a comp (more)uter For parts, does not work

Nikon BioStation IM With Parts This system was removed from a university lab where it was surplus to (more) requirements. The unit is in poor cosmetic condition and cannot be powered on or tested as several parts are missing or not connected. Therefore, this system is listed as Spares/Repair.

This CEM Discover Hydrolysis System was removed from a university lab where it was surplus to requir (more)ements. The units are in good cosmetic condition but have marks from use. It however doesn't seem to be a full system. 1 x CEM Discover SystemModel - 90810The unit powers on but has not been tested any further, cosmetically the unit is in a good used condition. 1 x CEM Microwave Hydrolysis unit:-Model - Protein HydrolysisModel no. 510500The unit's cables connect to Discover system unit and is in a good used cosmetic condition. It has not been tested further. Included with it are;1 x CEM Life Science Instruments Operations manuals CD1 x CEM Microwave Synthesis Chemistry at the speed of light CD2 x Speedaire Regulators Model 4ZM081 x CEM Fiber optic temperature sensor1 x VWR 50 Pack Micro Stirring Bar1 x Carton of 100 x 10ml Reaction Vials1 x Box of 100 x Septa Kit Intellivent Caps1 x VWR 3 Prong swivel vinyl jam1 x Chemglass Straight Connecting Adaptor 24/40 Joints1 x Chemglass Straight Connecting Adaptor 14/20 Joints1 x Wrench set (Green x 2 pieces)1 x 3/8 x 1/4 Hex reducing brass1 x Sure-lok Brass straight fitting1/2 x 1/4 Hex reducing brass1 x Box of approx 100 0.3ml Crimp Top Vials1 x Installation and Operation Instructions

This Beckman Coulter Biomek Fxp System with Software & Accessories was removed from a university (more) lab where it was surplus to requirements. All units are in good used cosmetic condition but they do have various signs of general use. The system consists of: 1 x Beckman Coulter Biomek Fxp CAT No A31842.The unit powers up and both lights illuminate Green. It was not tested any further.The original front-top guard/cover is included but one edge is damaged. The hinges and hardware to attach it are not included. 1 x Beckman Coulter Biomek Stacker Carousel CAT No 148520.It comes with:2 x Stacker 10 hotels.2 x FX Stacker 10 hotels.1 x Stacker Carousel Pendant.The mounting plate to connect it to the Fxp is included.It also comes with a spare Microscan, operational condition is unknown. 1 x Lenovo PC with monitor, mouse & keyboard.It has the Biomek Version 3.3 software installed. 1 x Jun-Air 1795001 Compressor. The system also includes quite a few plates and consumables and various connection cables.

ING Climas RAF 12300 laboratory refrigerator. Temperature range from +3 ºC to +5 ºC. Capacity 1230 L (more). Forced air recirculation. Homogeneity in the chamber ± 1.5 ºC. Pt 1000 temperature probe with a precision of 0.1 ºC. Continuous paper temperature recorder. Alarm: acoustic and visual for maximum and minimum temperature as well as voltage failure. Blind triple door, with a large handle. Dimensions: external 1400 x 890 x 2070 mm; internal 1200 x 690 x 1340 mm. ING Climas RAF 9000C laboratory refrigerator. PROFESSIONAL LABORATORY REFRIGERATORS

The MPS R device comprises electromagnetic MPS module and R touch panel featuring 5.7” display (more). It has been designed to be integrated into weighing systems already owned by the customer. Compact design plus integrated electronics make MAS module easy to be adapted into technological lines and built inside customer-owned devices. It is possible to perform the measurements using the under-pan weighing method wherein the load is suspended beneath the module or a regular weighing pan. Due to high measurement accuracy, it is recommended to install the module inside customer's device (e.g. in a draft shield) in order to reduce the influence of ambient conditions on the measurement result. The MPS module comes standard with a dedicated power supply. Features: Brand new design of the electromagnetic mechanism housed in an aluminium enclosure, Readability of 0.01 g, Ease of adaptation to the required storage space, Internal adjustment, Various options of hardware configuration. The module has been equipped with RS232 and USB type B interfaces. Dedicated freeware software, R Panel, has been designed to enable control of the module via a computer. It provides access to all the keys and functions available directly from the operation panel, e.g. taring, zeroing, setup, etc. An innovative algorithm for automatic search of electromagnetic weighing modules is a guarantee for a remarkable ease of connection of a module to a computer. With R Panel software, the complete functionality of R series balances is available via PC. R Panel functionality has been implemented in RLab program as one of its numerous functions. MPS.R can also be integrated with E2R Weighing Records and E2R PGC.

Leica EG1140H Paraffin Embedding Center & EG1140C Cold Plate This was removed from a university  (more)lab where it was surplus to requirements. We tested both units with a digital thermometer (not included). 1 x Model - EG1140 HCat no. 038831690Top tray - 30 x 15.5 x 8cmSide trays - 26 x 16.5 x 4cm The unit powers on and heats up on side plates and top, the thermometer was showing temperature readings of up to 50°c when on a setting of 55°c. The light does not work. 1 x Model - EG1140 C-1Cat no. 038831679The unit powers on with the plate cooling. The temperature cooled to as low as -4°c after running for around 20 minutes. Both units are in a reasonable, used cosmetic condition with marks and stains.

Gerber DSC 1500 Single Ply Automated Fabric Cutter This item was removed from a university where it  (more)was surplus to requirement. It is in good cosmetic condition, the previous client has stated it was in working order when last used. We were unable to test it at our facility as it has been decomissioned. Features:- Table size: 240 x 158 x 85cm ( l x w x h) - Cutting area: 183 x 152cm - Cutting speed: 1.1 meters per second Also includes the following: - Gerber carriage controller unit         Serial No. 2187        Year 2008 - HP Elitedesk 800 GI TWR PC running Windows 7 installed with Gerber Cutworks 5.1 software - HP KB-1156 keyboard - Iiyana Prolite Monitor - HP mouse part No. 672651-001 - Kramer data splitter box - Instruction Manual - Mechanical and Engineering Manual - 7 x Data cables *A compressed air system of 90 - 120psi at 14L/m is required for operation.*

Frame intended for 4-load-cell stainless steel scales, that are to be embedded in the ground.

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: flat polygonal sheet Nominal value: 100 mg Material: Stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

Labconco 700202000 FreeZone 2.5L -50C Complete Freeze Dryer System, PTFE CoatedFeatures - Patented m (more)oisture sensorprotects the vacuum pumpby preventing refrigerationor vacuum start-up whenmoisture is detected incollector chamber area. - Vacuum control valvemaintains set point vacuumlevel to speed the freezedrying process. - Lyo-Works OS provides a real time display of collector temperature and vacuum level - Flexible programming and control of optional drying accessories - Optional End-Zone™ end point detection for flask freeze drying - One-touch data logging and display provides information to maximize sample quality and minimize run time - FreeZone exclusive features protect your vacuum pump from costly damage: A vacuum break valve bleeds air into the system when power to the freeze dryer or vacuum pump is shut off for more than 5 minutes. A moisture sensor prevents refrigeration or vacuum start-up when moisture is detected in the drain line. Vacuum pump is automatically shut down when a leak is present in initial pull down or during run Bundle includes a multiport drying chamber comprised of PTFE coated 304 stainless steel. Drying Chambers provide a means to attach a flask to your freeze dryer or contain samples in bulk. Lyo-Works™ OS provides a real time display of collector temperature, vacuum level and optional End-Zone™ end point detection system, shown on a 5" full color, capacitive touch screen. The included Edwards RV rotary vane pump delivers excellent ultimate vacuum pressure, high pumping speeds and superior vapour handling capabilities with quiet operation. The Labconco FreeZone 2.5L -50 C Complete Freeze Dryer System includes the Labconco 700202000 FreeZone 2.5L -50 C Benchtop Freeze Dryer with PTFE Coil and Collector, Labconco 7522801 12-Port Drying Chamber, PTFE-Coated, and an Edwards RV3 Rotary Vane Vacuum Pump. Features of the Labconco 700202000 FreeZone 2.5L -50 C Benchtop Freeze Dryer with PTFE Coil and Collector: Upright PTFE coated collector coil holds 2.5L of ice before defrosting -50C (for aqueous samples) Features include hot gas defrost, side-mounted USB port and rear-mounted Ethernet connection Environmentally-friendly HCFC/CFC-free refrigeration system Internal PTFE coated coil maximizes vapor-trapping efficiency FreeZone exclusive features protect your vacuumpump from costly damage: A vacuum break valve bleeds air into the system whenpower to the freeze dryer or vacuum pump is shut off for more than 5 minutes. Amoisture sensor prevents refrigeration or vacuum start-up when moisture isdetected in the drain line. Vacuum pump is automatically shut down when a leakis present in initial pull down or during run. The Labconco 7522801 12-Port Drying chamber includes 12 neoprene valves with plastic knobs that accommodate both 1/2" and 3/4" adapters for connection of flasks, a 1/2" thick arcylic lid with neoprene gasket, and one latching pin. Made of type 304 stainless steel with corrosion-resistant PTFE-coated interior. It is compatible with FreeZone 1, 2.5, 4.5, 6, 8, 12 or 18 Liter Freeze Dryers.

IKA R 2302 Propeller 4 - Bladed Stirrer Standard stirring element. For drawing the material to be m (more)ixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.Stirrer Ø: 150 mmShaft Ø: 13 mmShaft length: 800 mm INCLUDED: The IKA R 1381 Propeller 3 - Bladed Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote