QuattroFlow QF150 Diaphragm Pump

VACUUBRAND PC 611 Select Chemistry Pumping Unit Ultimate Vacuum 1.5 mbar (1.1 Torr) Maximum Pumping (more) Speed 2.2 CFM at 60Hz Number of Heads/Stages 4/3 Features - VACUU-SELECT vacuum controller with graphical user interface simplifies work in the laboratory - Predefined applications save time and give reproducible result - Easy-to-use application editor allows own process sequences - Meets high vacuum requirements for most high boiling solvents - PC 611 Select allows simultaneous operation of two independent vacuum applications with electronic vacuum control This chemistry vacuum pumping unit is an economic space-saving solution for simultaneous operation of two independent vacuum applications with one single pump. Based on our popular MD 4C NT three-stage chemistry diaphragm pump, the PC 611 select is frequently used for vacuum applications involving even high boiling point solvents. This pump has sufficient capacity for parallel operation of two demanding applications. One application is controlled by the VACUU-SELECT vacuum controller, via an electronic solenoid valve. The second application is controlled by a manually controlled diaphragm valve. Both vacuum ports have integrated check valves to protect against cross contamination and interference. The integrated VACUU-SELECT controller provides an easy-to-use, application-based interface that covers all common lab applications. The VACUU-SELECT controller has you covered. Use manual set-point-control for simple processes, run distillations, or create your own application with simple drag-and-drop editing. For solvent evaporation, it detects the boiling pressure and switches to 2-point control mode to hold the pressure stable when a boiling point is detected. The inlet separator, made of glass with a robust protective coating, prevents particles and liquid droplets from entering the pump, preventing damage, and extending pump life. And the exhaust vapor condenser allows for nearly complete recovery of solvents when used with a chilled water line or recirculating chiller for economical recycling and environmental protection. INCLUDED: The VACUUBRAND PC 611 Select Chemistry Pumping Unit includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

KNF N 860.1.2 FT.18 IP-54T Diaphragm Pump Ultimate Vacuum 99 mbar Maximum Flow Rate 110L/min (6.6 m (more) 3/h) Protection Class IP54 Features - Clean, 100% oil-free operation - Chemically-resistant PTFE/FFPM flowpath - Ideal for extremely aggressive/corrosive gases and vapors - Compact, quiet and reliable - Can handle wet and highly corrosive gases or vapors - Gastight, leakage rate ratio 6 x 10-3 mbar - Maintenance-free The chemically-resistant series N860.3FTP diaphragm pump is KNF's largest laboratory twin-head unit. There is a wide range of applications for this pump in the lab. It is used especially whenever clean vacuum is required. Examples include vacuum-drying of vacuum oven chambers for drying or heat-treating substances and components or larger rotary evaporators, vessels, filters and textiles. Due to its high resistance to aggressive media, this pump can be used with most all solvents. The heart of these very compact pumps are KNF structured diaphragms (PTFE-coated). These patented diaphragms were stress-optimized using the Finite Elements method. As a result, we were able to make the pumps smaller while increasing the service life of the diaphragm. INCLUDED: The KNF N 860.1.2 FT.18 IP-54T Diaphragm Pump includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The peristaltic pump of the Cole Parmer type Masterflex L/S is ideal for pumping corrosive, abrasive (more) and viscous liquids without damaging the pump. The Cole Parmer Masterflex L/S can also be used in the pharmaceutical and biopharmaceutical industry. This peristaltic pump can be used in combination with the L/S 13, L/S 14, L/S 16, L/S 25, L/S 17 and L/S 18 tubing. Speed: 10 – 600 rpm Pump head type: 2x 7518-00 Tube range: L/S 13: 0.6 – 36 mL/min L/S 14: 2.0 – 130 mL/min L/S 16: 8.0 – 480 mL/min L/S 25: 20 – 1000 mL/min L/S 17: 30 – 1700 mL/min L/S 18: 40 – 2300 mL/min

A laboratory oven with an exceptional quality/price ratio! 100% Made in Italy and with all accessori (more)es already included as standard.Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 300°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory Oven STF-N 52 FALC Natural Convection

Laboratory refrigerated incubator with multiparametric microprocessor. Fine temperature regulation,  (more)clear and complete display, top safety class, front regulation of the rear flue. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     2 shelves     Possibility to set ramps with module and RS232 port (4 programs of 8 steps)     Rear flue 45 mm for smoke outlet with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The stove has an independent electronic safety system. The electronic circuit DOES NOT depend on the thermoregulation card and will work even if the main card defaults. ICT-AR FALC laboratory incubator

F2 Mass Standard - knob weights with adjustment chamber - set (1 g - 100 g), plastic box Number of p (more)ieces in the set: 9 weights 1 g i 2 g – solid masses without adjusting chamber

THB sensor THB sensor is a device measuring ambient conditions, it cooperates with: a computer (1 se (more)nsor via USB 2.0 port); direct cooperation, a weighing device (1 sensor via USB 2.0 port); direct cooperation, a THBR Box (up to 4 sensors connected to THBR Box via USB 2.0 port). The THB sensor is designed to measure parameters such as temperature, humidity, pressure, air density and vibrations level. Sensor registers level of permissible vibrations at the workstation, wherein the values of vibrations level are displayed within 0 - 100% range versus reference values in laboratory conditions. Values exceeding 100% threshold inform about potential occurrence of error greater than permissible error of mass measurement performed using weighing device. Each sensor has its own identification number that is assigned to measurements saved to the database. Ambient conditions can be monitored using: weighing instrument display website Windows OS application: THB Single or THB Multi Android application. On the basis of sent measurements, the THB Single or THB Multi software determines air temperature, humidity, pressure, density and permissible vibrations factor.